journal article·2022-10

Development of an Assortment of Polyethylene Pipes with an Estimated Wear Resistance for Pulp Hydro-Transportation

V. V. Kovriga, V. R. Gumen, V. V. Selivanov, V. N. Karchev

Journal of Friction and Wear· Volume 43· Issue 5
Publisher page

Abstract

Abstract— Currently, the choice of wear-resistant pipes is based on the wear resistance of the material and is not accompanied by consideration of the design properties. Polyethylene pipes are widely used for hydro-transportation of suspensions. In order to more fully inform consumers of polyethylene pipes about various levels of wear resistance, the Polyplastic group is developing a range of pipes with a calculated wear resistance resource. An indicator of the calculation of the wear resistance resource is the length of the flow of suspensions, which, passing through the pipeline, wears out the wall by 75%. To determine the estimated resource, data on the decrease in wall thickness during the passage of the flow are required. The only internationally recognized method to determine this value is the EN 295/3 method [1] using a ribbed abrasive, which was used as a reference method in this study.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Industrial Engineering and Technologies · Engineering Diagnostics and Reliability · Vibration and Dynamic Analysis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (10)

Show source-provided references
1. DIN EN 295-3-2012: Vitrified clay Pipe Systems for Drains and Sewers. Part 3: Test Methods.
2. Gumen, V.R. and Kovriga, V.V., Development of roughness and decrease in hardness of abrasive wear surface in various types of polyethylene. Part 1, Plast. Massy, 2021, nos. 11–12, pp. 26–28. https://doi.org/10.35164/0554-2901-2021-11-12-26-2810.35164/0554-2901-2021-11-12-26-28 ↗
3. Kovriga, V.V., Development of a range of pipes intended for hydrotransport of suspensions with different estimated wear resistance, in Tezisy dokladov Mezhdunarodnoi nauchno-tekhnicheskoi konferentsii POLIKOMTRIB-2022 (Proceedings of the International Conference POLIKOMTRIB-2022), Gomel’: IMMS NAN Belarusi, 2022, p. 10.
4. Kovriga, V.V., Kurmanina, L.G., Sevast’yanov, V.V., and Gumen, V.R., The variations of wear readings study according to EN 295-3 method using the ISO 6133 standard for analysis of multi-peak curves, Plast. Massy, 2021, nos. 5–6, pp. 7–9. https://doi.org/10.35164/0554-2901-2021-5-6-7-910.35164/0554-2901-2021-5-6-7-9 ↗
5. Otstavnov, A.A., Prishin, O.G., and Har’kin, V.A., Prediction of the service life of polyethylene pipelines with a structured wall, Santekh. Otopl. Kondits., 2015, no. 5, pp. 30–36.
6. Brochure ARGULINE piping system made of PE100 (-RC) for gas and water supply. www.agru.at. Accessed 2022.
7. Antoev, K.P. and Popov, S.N., Study of resistance to hydroabrasive wear of GRP pipes with a polyurethane coating, Prir. Resur. Arkt. Subarkt., 2017, no. 1 (85), pp. 87–90.
8. Kovriga, V.V., Gumen, V.R., Sevast’yanov, V.V., and Kachalina, A.L., Unified indicator of the wear of plastics for different assessment methods, Plast. Massy, 2020, nos. 7–8, pp. 21–22. https://doi.org/10.35164/0554-2901-2020-7-8-21-2210.35164/0554-2901-2020-7-8-21-22 ↗
9. Kovriga, V.V., Soldatenko, L.K., Markova, E.S., Seva-st’yanov, V.V., Gumen, V.R., and Knyaz’kina, I.V., Voluntary certification of polyethylene pipes according to estimated wear resistance resource at the production plants of POLYPLASTIC group, Plast. Massy, 2020, nos. 5–6, pp. 38–40. https://doi.org/10.35164/0554-2901-2020-5-6-38-4010.35164/0554-2901-2020-5-6-38-40 ↗
10. Egorov, D.A., The use of pipes made of polymeric materials, Evraz. Nauch. Zh., 2016, no. 6, pp. 317–328.