Formation of Boundary Lubricating Films at Friction in Sunflower Oil with Addition of 1,3-Diketones
Source abstract
Abstract
The operation lifetime of friction units depends on properties of boundary layers, formed by lubricants. The highest adhesion to metal surfaces is demonstrated by boundary films formed during tribochemical reactions. The resulting high molecular products, known as friction polymers, protect the contacting surfaces against wear. This study analyzes the influence of additives, the molecules of which are characterized by keto-enol tautomerism, on the processes of formation of boundary layers during friction in sunflower oil. It has been assumed that oil modification by additives, which are active in condensational reactions, will accelerate formation of friction polymers. Addition of up to 0.5 wt % of acetoacetic and malonic esters into sunflower oil accelerates formation of boundary layers, which is expressed in improvement of antifriction properties of oil. At higher concentrations of the additives the antifriction properties deteriorate. The obtained data are related with chemical interaction of additive molecules with metal. As a consequence, the surface oxide layer is eliminated. IR spectroscopy has detected chemical bonds between C–O–Fe exclusively in wear particles. With increase in the concentrations of additives in sunflower oil the weight of wear particles decreases after tribological tests. It has been demonstrated that formation of boundary lubricating films occurs upon interaction of molecules of sunflower oil with non-oxidized iron. Activity of added 1,3-diketones is determined by structural peculiarities of their molecules: existence of a mobile (acidic) hydrogen atom and groups of atoms capable of forming complex compounds with iron cations. The established regularities allow selecting the composition of lubricating medium in order to accelerate the formation of boundary lubricating layers closely connected with metal.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Lubricants and Their Additives · Tribology and Wear Analysis · Biodiesel Production and Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (20)
Show source-provided references
1. Hsu, S.M. and Gates, R.S., Boundary lubricating films: formation and lubrication mechanism, Tribol. Int., 2005, vol. 38, pp. 305–312. https://doi.org/10.1016/j.triboint.2004.08.02110.1016/j.triboint.2004.08.021 ↗
2. Hsu, S.M. and Gates, R.S., Effect of materials on tribochemical reactions between hydrocarbons and surfaces, J. Phys. D: Appl. Phys., 2006, vol. 39, pp. 3128–3137. https://doi.org/10.1088/0022-3727/39/15/S0210.1088/0022-3727/39/15/S02 ↗
3. Lindsay, N.E., Carter, R.O., Schmitz, P.J., Hack, L.P., Chase, R.E., de Vries, J.E., and Willermet, P.A., Characterization of films formed at a lubricated cam/tappet contact, Spectrochim. Acta, Part A, 1993, vol. 49, p. 2057. https://doi.org/10.1016/S0584-8539(09)91015-710.1016/S0584-8539(09)91015-7 ↗
4. Feklistova, T.G., Vasil’ev, I.A., Sakhabutdinov, A.G., Lipovich, V.G., Levin, P.I., Pirogov, O.N., and Oleinik, E.F., Kinetics of the oxidation of esters of dicarboxylic acids and forming “friction polymers,” Trenie Iznos, 1982, vol. 3, no. 2, pp. 225–233.
5. Li, K., Jiang, J., Amann, T., Yuan, Y., Wang, C., Yuan, C., and Neville, A., Evaluation of 1,3-diketone as a novel friction modifier for lubricating oils, Wear, 2020, vols. 452–453, art. ID 203299. https://doi.org/10.1016/j.wear.2020.20329910.1016/j.wear.2020.203299 ↗
6. Zhang, S., Zhang, C., Chen, X., Li, K., Jiang, J., Yuan, C., and Luo, J., XPS and ToF-SIMS analysis of the tribochemical absorbed films on steel surfaces lubricated with diketone, Tribol. Int., 2019, vol. 130, pp. 184–190. https://doi.org/10.1016/j.triboint.2018.09.01810.1016/j.triboint.2018.09.018 ↗
7. Naidu, S.K., Klaus, E.E., and Duda, J.L., Evaluation of liquid phase oxidation products of ester and mineral oil lubricants, Ind. Eng. Chem. Prod. Res. Dev., 1984, vol. 23, pp. 613–619. https://doi.org/10.1021/i300016a02110.1021/i300016a021 ↗
8. Khakhanina, T.I. and Osipenkova, N.G., Organicheskaya khimiya: uchebnoe posobie (Organic Chemistry: Manual), Moscow: Yurait, 2018.
9. Syahir, A.Z., Zulkifli, N.W.M., Masjuki, H.H., Kalam, M.A., Alabdulkarem, A., Gulzar, M., Khuong, L.S., and Harith, M.H., A review on bio-based lubricants and their applications, J. Clean. Prod., 2017, vol. 168, pp. 997–1016. https://doi.org/10.1016/j.jclepro.2017.09.10610.1016/j.jclepro.2017.09.106 ↗
10. Grigoriev, A.Ya., Kavaliova, I.N., Kreivaitis, R., Kupchinskas, A., and Padgurskas, Yu., Effect of fatty-acid composition and structure of alkyl radicals of plant oil triglycerides on their tribotechnical characteristics, J. Frict. Wear, 2016, vol. 37, no. 6, pp. 552–555.10.3103/S1068366616060052 ↗
11. Kavaliova, I.N. and Grigoriev, F.A., Corrosive action and oxidation of vegetable oils used in lubricants, J. Frict. Wear, 2018, vol. 39, no. 6, pp. 535–538.10.3103/S1068366618660042 ↗
12. Kolesnikov, I.V., Lebedinskii, K.S., and Boiko, M.V., Investigation of the effect of some organic compounds on the formation of an antifriction film in a dioctyl sebacate medium, MATEC Web Conf., 2018, vol. 226, art. ID 03025. https://doi.org/10.1051/matecconf/20182260302510.1051/matecconf/201822603025 ↗
13. Walter, M., Amann, T., Li, K., Kailer, A., Rühe, J., and Moseler, M., 1,3-Diketone fluids and their complexes with iron, J. Phys. Chem. A, 2013, vol. 117, no. 16, pp. 3369–3376. https://doi.org/10.1021/jp400980y10.1021/jp400980y ↗
14. Sidashov, A.V., Boiko, M.V., Kozakov, A.T., and Lesnyak, V.V., Formation of surface structures under friction in synthetic oils, J. Frict. Wear, 2020, vol. 41, no. 5, pp. 417–420.10.3103/S1068366620050165 ↗
15. Myasnikova, N.A., Sidashov, A.V., and Myasnikov, P.V., The formation and functioning of surface nanostructures at tribocontact, Mater. Sci. Forum, 2016, vol. 870, pp. 303–308. https://doi.org/10.4028/www.scientific.net/MSF.870.30310.4028/www.scientific.net/MSF.870.303 ↗
16. Boiko, M.V., Sidashov, A.V., Boiko, T.G., Burykin, I.V., and Uflyand, I.E., The mechanism of formation of boundary lubricating films during friction in a medium of di(2-ethylhexyl) sebacate, Tribol. Int., 2021, vol. 165, art. ID 107222. https://doi.org/10.1016/j.triboint.2021.10722210.1016/j.triboint.2021.107222 ↗
17. Bertrand, P.A., Chemical degradation of a multiply alkylated cyclopentane (MAC) oil during wear: Implications for spacecraft attitude control system bearings, Tribol. Lett., 2013, vol. 49, pp. 357–370. https://doi.org/10.1007/s11249-012-0075-910.1007/s11249-012-0075-9 ↗
18. Anderson, J.R. and Baker, B.G., The hydrocracking of saturated hydrocarbons over evaporated metal films, Proc. R. Soc. London, Ser. A, 1963, vol. 271, p. 402.10.1098/rspa.1963.0026 ↗
19. Roberts, R.W., Adsorption and decomposition of hydrocarbons on clean metal films, Br. J. Appl. Phys., 1963, vol. 14, pp. 485–487. https://doi.org/10.1088/0508-3443/14/8/30810.1088/0508-3443/14/8/308 ↗
20. Morecroft, D.W., Reactions of octadecane and decoic acid with clean iron surfaces, Wear, 1971, vol. 18, pp. 333–339. https://doi.org/10.1016/0043-1648(71)90076-710.1016/0043-1648(71)90076-7 ↗