Tribological Properties of Antifriction Molybdenum Disulfide Coatings under Extreme Conditions
Source abstract
Abstract
Abstract The tribological properties under extreme conditions, structure, and chemical composition of antifriction coatings based on molybdenum disulfide deposited by magnetron deposition and suspension spraying with various types of a film former onto the surface of samples made of 12Kh18N10T stainless steel are studied. Tribological reciprocating movement tests in accordance with the ASTM G133 standard are carried out under reciprocating movement of a ball made of ShKh15 steel with a diameter of 6.35 mm in vacuum at the temperature of the samples of 250°C. The coefficient of friction and lifetime of the coatings under extreme operating conditions are determined. Suspension deposited coatings show a coefficient of friction of 0.046–0.049, and the magnetron deposited coating of 0.061. The maximum service life of the suspension deposited coatings is 19.7–21.8 h, and of the magnetron deposited coating, 22.7 h.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Tribology and Wear Analysis · Metal and Thin Film Mechanics · Lubricants and Their Additives
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (17)
Show source-provided references
1. Scharf, T.W. and Prasad, S.V., Solid lubricants: A review, J. Mater. Sci., 2013, vol. 48, pp. 511–531. https://doi.org/10.1007/s10853-012-7038-210.1007/s10853-012-7038-2 ↗
2. Sarkar, M. and Mandal, N., Solid lubricant materials for high temperature application: A review, Mater. Today: Proc., 2022. https://doi.org/10.1016/j.matpr.2022.06.03010.1016/j.matpr.2022.06.030 ↗
3. Semenov, A.P., High-temperature lubricants, J. Frict. Wear, 2007, vol. 28, no. 5, p. 476.10.3103/S1068366607050108 ↗
4. Vazirisereshk, M.R., Martini, A., Strubbe, D.A., and Baykara, M.Z., Solid lubrication with MoS2: A review, Lubricants, 2019, no. 7, p. 57. https://doi.org/10.3390/lubricants707005710.3390/lubricants7070057 ↗
5. Shankara, A., Menezes, P.L., Simha, K.R.Y., et al., Study of solid lubrication with MoS2 coating in the presence of additives using reciprocating ball-on-flat scratch tester, Sadhana, 2008, vol. 33, pp. 207–220. https://doi.org/10.1007/s12046-008-0014-510.1007/s12046-008-0014-5 ↗
6. Khopin, P.N., Comprehensive assessment of tribotechnical indicators of interfaces with solid lubricant coatings, Doctoral (Tech. Sci.) Dissertation, Moscow, 2018.
7. Prozhega, M.V., Kharkov, M.M., Reschikov, E.O., Rykunov, G.I., Kaziev, A.V., Kukushkina, M.S., Kolodko, D.V., and Stepanova, T.V., Estimation of MoS2 coating performance on bronze and steel in vacuum at high temperatures, Coatings, 2022, vol. 12, no. 2, p. 125. https://doi.org/10.3390/coatings1202012510.3390/coatings12020125 ↗
8. Serles, P., Gaber, K., Pajovic, S., Colas, G., and Filleter, T., High temperature microtribological studies of MoS2 lubrication for low earth orbit, Lubricants, 2020, no. 8, p. 49. https://doi.org/10.3390/lubricants804004910.3390/lubricants8040049 ↗
9. Khopin, P.N., On the friction mechanisms and assessment of tribological characteristics of solid lubricant coatings of various application methods, Izv. Vyssh. Uchebn. Zaved., Mashinostr., 2022, no. 4 (475), pp. 73–86. https://doi.org/10.18698/0536-1044-2022-4-73-8610.18698/0536-1044-2022-4-73-86 ↗
10. Khopin, P.N., The efficiency of tribocoupling with MoS2-based solid lubricant coatings using magnetron and suspension sputtering, Izv. Vyssh. Uchebn. Zaved., Mashinostr., 2019, no. 9 (714), pp. 96–104. https://doi.org/10.18698/0536-1044-2019-9-96-10410.18698/0536-1044-2019-9-96-104 ↗
11. Tillmann, W., Wittig, A., Stangier, D., Moldenhauer, H., Thomann, C.-A., Debus, J., Aurich, D., and Bruemmer, A., Temperature-dependent tribological behavior of MoSx thin films synthesized by HiPIMS, Tribol. Int., 2021, vol. 153, p. 106655. https://doi.org/10.1016/j.triboint.2020.10665510.1016/j.triboint.2020.106655 ↗
12. Yang, J.F., Jiang, Y., Hardell, J., et al., Influence of service temperature on tribological characteristics of self-lubricant coatings: A review, Front. Mater. Sci., 2013, no. 7, pp. 28–39. https://doi.org/10.1007/s11706-013-0190-z10.1007/s11706-013-0190-z ↗
13. Dreva, K., Morina, A., Yang, L., and Neville, A., The effect of temperature on water desorption and oxide formation in MoS2 coatings and its impact on tribological properties, Surf. Coat. Technol., 2022, vol. 433, p. 128077. https://doi.org/10.1016/j.surfcoat.2021.12807710.1016/j.surfcoat.2021.128077 ↗
14. Prudnikov, M.I., Solid lubricant anti-friction coating by modengy: From idea to practice, Glav. Mekhanik, 2018, nos. 1—2, pp. 56—60.
15. Prozhega, M.V., Reschikov, E.O., Shirshov, A.D., and Yakovenko, N.G., Frictional properties of 3D printing polymers in vacuum, J. Frict. Wear, 2020, vol. 41, no. 6, pp. 565–570. https://doi.org/10.3103/S106836662006017310.3103/S1068366620060173 ↗
16. Descartes, S., Godeau, C., and Berthier, Y., Friction and lifetime of a contact lubricated by a solid third body formed from an MoS1.6 coating at low temperature, Wear, 2015, vols. 330–331, pp. 478–489. https://doi.org/10.1016/j.wear.2015.01.02710.1016/j.wear.2015.01.027 ↗
17. Meng, F., Yang, C., and Han, H., Study on tribological performances of MoS2 coating at high temperature, Proc. Inst. Mech. Eng., Part J, 2018, vol. 232, no. 8, pp. 964–973. https://doi.org/10.1177/135065011773527210.1177/1350650117735272 ↗