Modeling of Stationary Frictional Heating of a Coated Body
Source abstract
Abstract
A model of stationary friction heating of a coated body is proposed in this paper and a discrete contact for periodically located circular areas is considered. The elastic properties of materials are assumed to be temperature independent in the considered temperature range. The stress-strain state of the coating is considered to be known from the solution of the contact problem for a two-layer elastic base. Relations for calculating the temperature distribution in the surface layer and the base in the vicinity of a separate asperity taking into account the effect of neighboring asperities were obtained. As an example, we calculated the temperatures for a ceramic coating obtained by micro-arc oxidation and deposited on an aluminum alloy substrate. The results can be used to predict fracture upon frictional loading of coated bodies.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Brake Systems and Friction Analysis · Mechanical and Thermal Properties Analysis · Adhesion, Friction, and Surface Interactions
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (13)
Show source-provided references
1. Wang, R., Li, W., Ji, B., and Fang, D., Fracture strength of the particulate-reinforced ultra-high temperature ceramics based on a temperature dependent fracture toughness model, J. Mech. Phys. Solids, 2017, vol. 107, pp. 365–378.10.1016/j.jmps.2017.07.012 ↗
2. Jaeger, J.C., Moving source of heat and the temperature at sliding contacts, J. Proc. R. Soc. N.S.W., 1942, vol. 76, pp. 203–224.
3. Korovchinskii, M.V., Thermal contact in local friction, in Novoe v teorii treniya (Advances in Friction Theory), Moscow: Nauka, 1966, pp. 98–145.
4. Barber, J.R., The conduction of heat from sliding solids, Int. J. Heat Mass Transf., 1970, vol. 13, pp. 857–869.10.1016/0017-9310(70)90131-6 ↗
5. Liu, Y. and Barber, J.R., Transient heat conduction between rough sliding surfaces, Tribol. Lett., 2014, vol. 55, pp. 23–33.10.1007/s11249-014-0328-x ↗
6. Smith, E.H. and Arnell, R.D., The prediction of frictional temperature increases in dry, sliding contacts between different materials, Tribol. Lett., 2014, vol. 55, pp. 315–328.10.1007/s11249-014-0359-3 ↗
7. Tian, X. and Kennedy, F.E., Temperature rise at the sliding contact interface for a coated semi-infinite body, Trans. ASME, 1993, vol. 115, no. 1, pp. 1–9.10.1115/1.2920976 ↗
8. Evtushenko, A.A., Evtushenko, E.A., and Ivanik, E.G., Approximate method for determining the maximum temperature during quasistationary heating of a piecewise-homogeneous half-space, J. Appl. Mech. Tech. Phys., 2005, vol. 46, no. 3, pp. 375–385.10.1007/s10808-005-0087-4 ↗
9. Goryacheva, I.G., The periodic contact problem for an elastic half-space, J. Appl. Math. Mech., 1998, vol. 62, no. 6, pp. 959–966.10.1016/S0021-8928(98)00122-1 ↗
10. Gradshgein, I.S. and Ryzhik, I.M., Tablitsy integralov, sum, ryadov i proizvedenii (Tables of Integrals, Sums, Series, and Products), Moscow: Fizmatgiz, 1963.
11. Goryacheva, I.G. and Torskaya, E.V., A periodical contact problem for a system of dies and elastic layer adhered to another base, Trenie Iznos, 1995, vol. 16, no. 4, pp. 642–652.
12. Goryacheva, I.G. and Torskaya, E.V., Stress and fracture analysis in periodic contact problem for coated bodies, Fatigue Fract. Eng. Mater. Struct., 2003, vol. 26, no. 4, pp. 343-348.10.1046/j.1460-2695.2003.00580.x ↗
13. Torskaya, E.V., Lyubicheva, A.N., Lyakhovetskii, M.A., and Kornev, Yu.V., Theoretical and experimental study of the frictional destruction of ceramic coatings obtained by microarc oxidation, Materialy nauchno-tekhnicheskoi konferentsii “Polikomtrib-2017,” Tezisy dokladov (Proc. Sci.-Tech. Conf. “Polikomtrib-2017,” Abstracts of Papers), Gomel: Inst. Mekh. Metallopolim. Sist., Nats. Akad. Nauk Bel., 2017, p. 34.