Study of the Conditions for the Formation of an Adsorption Lubrication Mode of Heavily Loaded Friction Couples with Modeling in a Laboratory Setup
Source abstract
Abstract
Abstract—The mechanism of contact interaction of a heavily loaded friction pair in the presence of a lubricant at the contact is investigated. The results of tribological studies aimed at studying the influence of volumetric parameters of a lubricant at the time of friction and wear are presented. The adhesive ability of the lubricant was studied. It was concluded that the formation of a stable lubricant film is more influenced by the volume of lubricant supplied, which makes it possible to control the type of lubrication in contact and the amount of wear of samples under study. An explanation is proposed for the negative effect of the action of a lubricant supplied in large quantities.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Tribology and Wear Analysis · Lubricants and Their Additives · Gear and Bearing Dynamics Analysis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (10)
Show source-provided references
1. Grudnev, A.P., Vneshnee trenie pri prokatke (External Friction during Rolling), Moscow: Metallurgiya, 1973.
2. Kharchenko, M.V., Dema, R.R., Nefed’ev, S.P., and Osipova, O.A., Universal testing complex for determination of tribotechnical characteristics of lubricants based on series friction machine SMTs-2, Izv. Vyssh. Uchebn. Zaved., Mashinostr., 2017, no. 10 (691), pp. 60–68.
3. Kolmogorov, V.L., Mekhanika obrabotki metallov davleniem. Uchebnik dlya vuzov (Mechanics of Metal Processing by Pressure: Manual for Higher Education Institutions), Yekaterinburg: Ural. Gos. Tekh. Univ.–Ural. Politekh. Inst., 2001, 2nd ed.
4. Abramov, A.N., Kharchenko, M.V., and Dema, R.R., Formation of an adsorption monolayer in a linear frictional contact on friction surfaces using a non-abrasive lubricant, Izv. Vyssh. Uchebn. Zaved., Mashinostr., 2017, no. 2 (683), pp. 70–78.
5. Lukienko, L.V., Safonov, B.P., and Lysyuk, A.Ya., Laboratornyi praktikum po kursu “Osnovy treniya i iznashivaniya elementov tribomekhanicheskikh sistem oborudovaniya”: Uchebnoe posobie (Practical Manual for Study Course “Fundamentals of Friction and Wear of the Elements of Tribomechanical Systems of Equipment”), Novomoskovsk: Ross. Khim.-Tekhnol. Univ. im. D.I. Mendeleeva, 2000.
6. Chichinadze, A.V., Berlinger, E.M., and Braun, E.D., Trenie, iznos i smazka (tribologiya i tribotekhnika) (Friction, Wear, and Lubrication (Tribology and Tribotechnics)), Chichinadze, A.V., Ed., Moscow: Mashinostroenie, 2003.
7. Kragel’skii, I.V., Trenie, iznashivanie i smazka: Spravochnik (Friction, Wear, and Lubrication: Handbook), Kragel’skii, I.V. and Alisin, V.V., Eds., Moscow: Mashinostroenie, 1978, vol. 1, pp. 46–57.
8. Kodnir, D.S., Zhil’nikov, E.P., and Baiborodov, Yu.I., Elastogidrodinamicheskii raschet detalei mashin (Elastohydrodynamic Calculation of Machine Parts), Moscow: Mashinostroenie, 1988.
9. Platov, S.I., Dema, R.R., Kharchenko, M.V., and Amirov, R.N., Experience of application of liquid lubricating materials during wide strip hot rolling, IOP Conf. Ser.: Mater. Sci. Eng., 2018, vol. 287. https://doi.org/10.1088/1757-899X/287/1/01201110.1088/1757-899X/287/1/012011 ↗
10. Mazur, V.L. and Timoshenko, V.I., Hot rolling of strip with lubricant: theoretical and practical aspects, Steel Transl., 2018, vol. 48, no. 4, pp. 245–251.10.3103/S0967091218040071 ↗