Estimating stresses and movement work of a soil-cultivator tip using the finite-element method
Source abstract
Abstract
Working parts of tillage machines are in direct contact with soil abrasives. The shape and dimensions of the working parts undergo changes due to friction and wear. A finite-element model has been created for studying the stresses and in-soil movement work of the designed cultivator tip. The problem has been solved with a coupled Eulerian–Lagrangian method (the SIMULIA ABAQUS software). It has been shown that the minimum in-soil movement work of 3400 J is done by a tip with a sharpening angle of 185°.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Soil Mechanics and Vehicle Dynamics · Mechanical Systems and Engineering · Agricultural Engineering and Mechanization
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (10)
Show source-provided references
1. Ucgul, M., Fielke, J. M., and Saunders, C., Defining the effect of sweep tillage tool cutting edge geometry on tillage forces using 3D discrete element modeling, Inf. Process. Agric. China Agric. Univ., 2015, vol. 2, no. 2, pp. 130–141.
2. Mari, I.A., et al., Spatial distribution of soil forces on moldboard plough and draft requirement operated in silty-clay paddy field soil, J. Terramech.: Appl. Terrain-Veh. Syst., 2015, vol. 60, pp. 1–9.10.1016/j.jterra.2015.02.008 ↗
3. Ibrahmi, A., et al., Study the effect of tool geometry and operational conditions on moldboard plough forces and energy requirement: Part 1. Finite element simulation, Comput. Electron. Agric., 2015, vol. 117, pp. 258–267.10.1016/j.compag.2015.08.006 ↗
4. Lee, J.W., Kim, J.S., and Kim, K.U., Computer simulations to maximize fuel efficiency and work performance of agricultural tractors in rotovating and ploughing operations, Biosyst. Eng., 2016, vol. 142, pp. 1–11.10.1016/j.biosystemseng.2015.11.012 ↗
5. Chernoivanov, V.I., Ljaljakin, V.P., Aulov, V.F., Ishkov, A.V., Krivochurov, N.T., Ivanajsky, V.V., Koval, D.V., and Sokolov, A.V., Features of wear of agricultural machinery components strengthened by FenB–Fe–B composite boride coatings, J. Frict. Wear, 2015, vol. 36, no. 2, pp. 132–137.10.3103/S106836661502004X ↗
6. Schümann, B., Modeling of soils as multiphase-materials with Abaqus, Proc. SIMULIA Customer Conf. 2010, Providence, 2010, pp. 384–399.
7. Pichler, T., Pucker, T., Hamann, T., Henke, S. and Qiu, G., High-performance Abaqus simulations in soil mechanics reloaded—chances and frontiers, Proc. Int. SIMULIA Community Conf. in Providence, Rhode Island, 2012, pp. 237–266.
8. Jankauskas, V., et al., Analysis of abrasive wear performance of arc welded hard layers, Wear, 2008, vol. 265, nos. 11–12, pp. 1626–1632.10.1016/j.wear.2008.03.022 ↗
9. Jankauskas, V., Katinas, E., Skirkus, R., and Alekneviciene, V., The method of hardening soil rippers by surfacing and technical-economic assessment, J. Frict. Wear, 2014, vol. 35, no. 4, pp. 270–277.10.3103/S106836661404014X ↗
10. Skirkus, R., Jankauskas, V., and Gaidys, R., Simulations of the working contact loads of a tillage element, J. Frict. Wear, 2016, vol. 37, no. 4, pp. 401–405. http://dx.doi.org/10.3103/S1068366616040164.10.3103/S1068366616040164 ↗