journal article·2014-09

Influence of viscosity modifiers on the rheological properties of synthetic oils

L. V. Markova, V. M. Makarenko, H. Kong, H. -G. Han

Journal of Friction and Wear· Volume 35· Issue 5
Publisher page

Abstract

The study of the effect that the molecular weight and concentration of the polymer gelling additive PMMA (polymethylmethacrylate) introduced into the synthetic base oil PAO6 has on viscosity. The empirical dependence of the viscosity of the thickened oil on the content of additives has been established and the coefficients of the thickening efficiency of additive have been determined. An experimental study of the viscosity of synthetic oils on the shear rate has been carried out at different contents of viscosity modifier PMMA with different molecular weights in a base of PAO6. The ranges of velocities have been determined at which the oil exhibits properties of non-Newtonian fluid. It has been shown that, with an increase in the molecular weight of PMMA of additive at the same concentration in its base, the non-Newtonian behavior of oil begins to emerge at lower shear rates. It has been found that the use of an acoustic arsenal of the operational control of the viscosity of lubricating oils based both on the piezoelectric and the magnetoelastic interaction is promising for the operational control of the viscosity of lubricating oils.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Mechanics and Biomechanics Studies · Advanced Scientific Research Methods · Advanced Theoretical and Applied Studies in Material Sciences and Geometry

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (10)

Show source-provided references
1. Nehal, S.A. and Amal, M.N., Lubricating oil additives, in Tribology-Lubricants and Lubrication, Kuo, C.H., ed., InTech, 2011, pp. 249–268.
2. Holtzinger, J., Green, J.H., Lamb, G.D., Atkinson, D., and Spikes, H.A., Influence of viscosity modifiers on hydrodynamic friction, Proc 17th Int. Colloq. Tribol. on Solving Friction and Wear Problems, Esslingen, Germany, 2010, pp. 171–177.
3. Levanov, I.G., Review rheological models of motor oils used at calculations of dynamics of crankshaft sliding bearings, Vestn. Yuzhn.-Ural. Gos. Univ., 2010, vol. 10, pp. 54–62.
4. Hewson, R.W., Kapur, N., and Gaskell, P.H., Analytical and numerical solutions of thin lubricating films for differing shear-thinning viscosity models, J. Eng. Tribol., Part J: Proc. Inst. Mech. Eng., 2007, vol. 221, pp. 355–356.10.1243/13506501JET251 ↗
5. Agoston, A., Otsch, C., and Jakoby, B., Viscosity sensors for engine oil condition monitoring-application and interpretation of results, Sensors and Actuators, 2005, vol. 121, pp. 327–332.10.1016/j.sna.2005.02.024 ↗
6. Markova, L.V., Makarenko, V.M., Semenyuk, M.S., and Zozulya, A.P., On-line monitoring of the viscosity of lubricating oils, J. Friction Wear, 2010, vol. 31, pp. 433–442.10.3103/S106836661006005X ↗
7. Markova, L.V., Makarenko, V.M., Semenyuk, M.S., Zozulya, A.P., Kong, Kh., and Khan, Kh.-G., A magnetoelastic viscometer for on-line monitoring of viscosity of lubricating oils, J. Friction Wear, 2011, vol. 32, pp. 41–48.10.3103/S1068366611010090 ↗
8. Durdag, K., Solid state acoustic wave sensors for real-time in-line measurement of oil viscosity, Sensor Rev., 2008, vol. 28, pp. 68–73.10.1108/02602280810850053 ↗
9. Kuliev, A.M., Khimiya i tekhnologiya prisadok k maslam i toplivam (Chemistry and Technology of Additives to Oils and Fuels), Leningrad: Khimiya, 1985.
10. Stachowiak, G.W. and Batchelor, A.W., Engineering Tribology Butterworth-Heinemann, 2005, 3rd ed.