journal article·2016-03

The influence of the valena metal-plating additive on tribotechnical characteristics of the Steel–Bronze tribological system

M. Kandeva, D. Karastoyanov, E. Assenova, K. Jakimovska, S. Simeonov, A. Vencl

Journal of Friction and Wear· Volume 37· Issue 2
Publisher page

Abstract

The paper considers a change in the coefficient of friction and the temperature distribution in the contact zone of the steel–bronze tribosystem. Investigations were carried out by the shaft–bushing system for three values of the load in the mixed-to-boundary lubrication regime with SAE 80W transmission oil without and with Valena additive. It is found that the additive presence in oil decreases the coefficient of friction by 11–21%, depending on the applied load. At the same time, the maximum decrease in the coefficient of friction is observed at a maximum applied load of 1500 N.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Metal Alloys Wear and Properties · Metal and Thin Film Mechanics · Advanced materials and composites

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (12)

Show source-provided references
1. Garkunov, D.N., Tribotekhnika (iznos i bezyznosnost’): Uchebnik (Tribotechnics (Wear and Nonweariness), A Textbook), Moscow: MSKhA, 2001, 4th ed.
2. Babel’, V.G., Garkunov, D.N., Mamykin, S.M., and Kornik, P.I., RF Patent 2277579, Byull. Izobret., 2006, no. 16.
3. Kandeva, M., Vencl, A., and Assenova, E., Influence of “Valena” metal-plating additive on the friction properties of ball bearings, Tribol. J. BULTRIB, 2014, vol. 4, pp. 18–24.
4. Mamykin, S.M., Lapteva, V.G., and Kuksenova, L.I., Investigation into the tribotechnical efficiency of the Valena metal-plating additive to lubricating materials, J. Mach. Manuf. Reliab., 2007, vol. 36, no. 2, pp. 153–159.10.3103/S1052618807020094 ↗
5. Nicolis, G. and Prigogine, I., Self-Organization in Nonequilibrium Systems, New York: Wiley, 1977.
6. Haken, H., Synergetics. An Introduction. Nonequilibrium Phase Transitions and Self–Organization in Physics, Chemistry, and Biology, New York: Springer-Verlag, 1983.
7. Litvinov, V.N., Mikhin, N.M., and Myshkin, N.K., Fiziko-khimicheskaya mekhanika izbiratel’nogo perenosa pri trenii (Physico–Chemical Mechanics of Selective Transfer at Friction), Moscow: Nauka, 1979.
8. Shpenkov, G.P., Friction Surface Phenomena, Amsterdam: Elsevier, 1995.
9. Kandeva, M., Ivanova, B., Assenova, E., and Vencl, A., Influence of additives and selective transfer on wear reduction in the lubricated contact, Proc. Int. Conf. on Mater., Tribol., Recycling–MATRIB–2014, Vela Luka, Croatia, 2014, pp. 197–206.
10. Padgurskas, J., Snitka, V., Jankauskas, V., and Andriusis, A., Selective transfer phenomenon in lubricated sliding surfaces with copper and its alloy coatings made by electro-pulse spraying, Wear, 2006, no. 6, pp. 652–661.10.1016/j.wear.2005.03.033 ↗
11. Hamrock, B.J., Schmid, S.R., and Jacobson, B.O., Fundamentals of Fluid Film Lubrication, New York: Dekker, 2004.10.1201/9780203021187 ↗
12. Dobrica, M.B. and Fillon, M., Mixed lubrication, in: Encyclopedia of Tribology, Wang, Q.J. and Chung, Y.-W., Eds., New York: Springer-Verlag, 2013, pp. 2284–2291.10.1007/978-0-387-92897-5_27 ↗