journal article·2014-05

Experimental estimate of tribological characteristics of epilam-coated materials that operate in threaded joints under dry friction

A. V. Morozov

Journal of Friction and Wear· Volume 35· Issue 3
Publisher page

Abstract

Friction in the threaded joint of a screw and nut, the surfaces of which are treated by an epilam, is experimentally studied and an analytical engineering calculation of the coefficient of friction in this threaded joint is presented. Results of the study show the efficiency of the method for depositing a molecular film of the fluorine-containing surfactant (epilam) in order to reduce the friction losses in the screw-nut joint. It is shown that the coefficients of dynamic and static friction in the threaded joint are substantially smaller than those for the material without an epilam coating. The wear resistance of the epilam-coated materials increases due to the formation of a solid lubricant on the surfaces of the materials in contact. The results of the study show that the ultrathin epilam film prevents the occurrence of seizures in the threaded joint. The thermal tests have demonstrated that, after heating the epilam-coated material to a temperature of over 300°C, the coating loses its unique antifriction properties.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Tribology and Wear Analysis · Lubricants and Their Additives · Mechanical Systems and Engineering

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (17)

Show source-provided references
1. Belyi, V.A., Sviridenok, A.I., and Shcherbakov, S.V., Zubchatye peredachi iz plastmass (Plastic Gearings), Minsk: Nauka i Tekhnika, 1965.
2. Buznik, V.M., Fomin, V.M., Alkhimov, A.P., et al., Metallopolimernye nanokompozity (poluchenie, svoistva, primeneniya) (Metal-Polymer Nanocomposites: Production, Properties, and Applications), Novosibirsk: Izd. SO RAN, 2005.
3. Andreeva, O.G., Lukoyanov, N.N., Romanova, N.A., Ryabinin, N.A., RF Patent no. 2215766.
4. Andreeva, O.G., Romanova, N.A., and Buyanovskii, I.A., Ways for improving durability of friction units of instruments, Trenie i Smazka v Mashinakh i Mekhanizmakh, 2007, no. 1, pp. 23–27.
5. Gaidar, S.M. and Chumakov, A.G., Prospects of using nanotechnologies in engine building, Aviatsionno-Kosmicheskaya Tekh. i Tekhnol., 2009, no. 10 (67), pp. 12–16.
6. Garbar, I.I., Kisel’, A.S., Ryabinin, N.A., and Sapgir, E.V., Nature and mechanism of effect of epilams under friction. Pt. 2. Tribological characteristics of epilam-coated materials, Trenie Iznos, 1990, vol. 11, no. 6, pp. 987–995.
7. Semenov, A.P., The role of epilames in tribology, J. Frict. Wear, 2010, vol. 31, no. 6, pp. 612–626.10.3103/S1068366610060103 ↗
8. Kirichek, A.V. and Zvyagina, E.A., Conditions for rational use of epilam-coated high-speed steel drills, Trenie i Smazka v Mashinakh i Mekhanizmakh, 2007, no. 11, pp. 19–23.
9. Gulyanskii, L.G., Use of epilam coatings to improve wear resistance of parts, Trenie Iznos, 1992, vol. 13, no. 4, pp. 695–701.
10. Potekha, V.L., Rogachev, A.V., and Naprev, I.S., Theoretical-experimental assessment of optimum conditions of operation of epilam-coated tribojoints of machines, Trenie Iznos, 1996, vol. 17, no. 6, pp. 764–768.
11. Morozov, A.V., Eksperimental’noe opredelenie staticheskogo i dinamicheskogo koeffitsientov treniya skol’zheniya epilamirovannykh materialov // Trenie i iznos,@ 2014.
12. Kellerman, R. and Klein, H.-C., Untersuchungen uber den Einfluss der Reibung auf Vorspannung und Anzugsmoment von Schraubenverbindungen; Sonderdruck aus Zeitschrift “Konsruktion”, Berlin-Gottingen-Heidelberg: Springer-Verlag, 1955, num. 2.
13. Kragelskii, I.V. and Mikhin, N.M., Handbook of Friction Units of Machines, New York: ASME Press, 1988.
14. Prokof’ev, A.N., Technological ensuring and improvement of quality of threaded joints, Doctoral (Eng.) Dissertation, Bryansk, 2008.
15. Goryacheva, I.G., Morozov, A.V., Rozhdestvensky, Yu.V., Gavrilov, K.V., and Doikin, A.A., Development of method for calculating and experimentally evaluating tribological parameters of piston-cylinder tribosystem of diesel engine, J. Frict. Wear, 2013, vol. 34, no. 5, pp. 339–348.10.3103/S106836661305005X ↗
16. Dobychin, M.N., Kurbatkin, I.I., Morozov, A.V., Nikulin, A.V., Sachek, B.Ya., Savelov, A.S., and Anisimov, A.V., Study of carbon plastics modified by fluoroplastic at macrolevel, Vopr. Materialoved., 2009, no. 1 (57), pp. 26–32.
17. Gorbatsevich, G.N., Classification of fluorine-containing wear inhibitors: mechanisms of action and methods of use, Nauch.-Tekh. Byull.-Prilozhenie “Neftekhimicheskii Kompleks” k Zhurnalu “Vestn. Belneftekhima”, 2009, no. 3, pp. 56–62.