Influence of Copper Frictional Material Composition on Structure and Tribotechnical Properties
Source abstract
Abstract
Abstract—The article describes the effect of tin and graphite content in the composition of a copper-based friction material (FM) on the structure, tribological properties, and formation of the contact surface. It is shown that an increase in tin from 6 to 12 wt % leads to an increase in the friction coefficient and a decrease in the running-in time for wear resistance. When the tin content in the friction material is 6 wt %, during friction, plastic flow of the contact surface material occurs with the formation of a “third” layer. The type and content of graphite also significantly affect the tribotechnical properties of the FM: an increase in graphite content of more than 20 vol % increases the friction coefficient; when GK-1 pencil grade graphite is used, the friction coefficient increases to a lesser extent than for GE-1 elemental grade graphite, and the wear resistance increases by 2.5–3.0 times.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Tribology and Wear Analysis · Brake Systems and Friction Analysis · Lubricants and Their Additives
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (6)
Show source-provided references
1. Il’yushchenko, A.F., Leshok, A.V., and Shapovalova, O.A., Study of tribological behavior of metal–ceramic friction material MK-5 obtained by freely spread layer technique for hydromechanic transmissions, J. Frict. Wear, 2012, vol. 33, no. 5, pp. 365–370.10.3103/S1068366612050054 ↗
2. Kremcheev, R.A., Avtomaticheskie korobki peredach legkovykh avtomobilei: uchebnoe posobie (Automatic Transmission of Cars: Manual), Solomatin, N.S., Ed., Tolyatti: Tol’yat. Gos. Univ., 2012.
3. Vasil’ev, V.V., Development of adaptive laws for control of a transmission unit of a wheeled vehicle “hydrodynamic transmission–clutch-shaft gearbox,” Cand. Sci. (Eng.) Dissertation, Moscow: Bauman State Tech. Univ., 2018.
4. Fedorchenko, I.M. and Pugina, L.I., Kompozitsionnye spechennye antifriktsionnye materialy (Composite Sintered Antifriction Materials), Kiev: Naukova Dumka, 1980.
5. Ilyushchenko A.F., Leshok, A.V., and Karpyza, S.A., The effect of the number of metal-ceramic friction disks on the braking performance of the Amkodor loader, Mater., Tekhnol.,Instrum., 2012, vol. 17, no. 1, pp. 19–21.
6. Loginov, Yu.N., Med’ i deformiruemye mednye splavy: uchebnoe posobie (Copper and Deformable Copper Alloys: Manual), Yekaterinburg: Ural. Gos. Tekh. Univ.-Ural. Politekh. Inst., 2006, 2nd ed.