Powder Bearings with Polymer Inserts
Source abstract
Abstract
Abstract This work considers the design of a support slider bearing based on macro-composite material—a powder composite with polymer inserts—intended for operation in self-lubrication mode. The problems of the starting condition are solved in this work based on the implementation of the rotaprint principle by placing on the friction surface in the conical cavities of polymer inserts. The ratio of the areas of polymer, the lubricating element, and the metal surface was optimized in the work—as a result of which the amount of optimal value of the coefficient of relative area for the investigated range of design parameters of the bearing was 0.45 ± 0.05. The multifactor planning of experiment was used in this work to determine the optimal value of topology coefficient and to construct a regression model. The design of the support slider bearing was tested with a T-11 model precision tribometer.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Tribology and Wear Analysis · Tribology and Lubrication Engineering · Polymer Science and Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (11)
Show source-provided references
1. Fedorchenko, I.M. and Pugina, L.I., Kompozitsionnye spechennye antifriktsionnye materialy (Composite Sintered Antifriction Materials), Kiev: Naukova Dumka, 1980.
2. Zakharov, S.M., Multiple-support shafts with journal bearings: A simulation and evaluation of their performance, J. Frict. Wear, 2017, vol. 38, no. 3, pp. 195–201.10.3103/S1068366617030151 ↗
3. Akhverdiev, K.S., Mukutadze, A.M., Zadorozhnaya, N.S., and Fleck, B.M., Damper with a porous element for bearing arrangements, J. Frict. Wear, 2016, vol. 37, no. 4, pp. 395–400.10.3103/S1068366616040024 ↗
4. Zwieżycki, W., Prognozowanie Niezawodności Zużywających się Elementów Maszyn, Radom: Inst. Technol. Eksploat., 1999.
5. Chernets, M.V., Prediction of the life of a sliding bearing based on a cumulative wear model taking into account the lobing of the shaft contour, J. Frict. Wear, 2015, vol. 36, no. 2, pp. 163–169.10.3103/S1068366615020038 ↗
6. Tikhonov, R.S. and Starostin, N.P., Thermal diagnostics of friction in the system of sliding bearings at low rotation speeds of a common shaft, J. Frict. Wear, 2017, vol. 38, no. 4, pp. 321–327.10.3103/S1068366617040146 ↗
7. Elagina, O.Yu., Gusev, V.M., Buklakov, A.G., and Gantimirov, B.M., Study of the wear-resistance of coatings from clad powders under sliding friction with boundary lubrication, J. Frict. Wear, 2015, vol. 36, no. 3, pp. 218–222.10.3103/S1068366615030046 ↗
8. Pekin, H., Knoll, G., and Jacoby, K., Problems in the Calculation of Hydrodynamic Load Carrying Capacity, Düsseldorf: VDI Verlag, 1983.
9. Bez”yazychnyi, V.F., Shcherek, M., and Sutyagin, A.N., Testing of samples made from EP 612 material on a T‑11 friction machine, Vestn. Rybinsk. Gos. Aviats. Tekhnol. Akad. im. P.A. Solov’eva, 2013, vol. 24, no. 1, pp. 84–90.
10. Kochanowski, V.A., Bol’shikh, I.V., and Glazunov, D.V., Depositing of composite coatings, Vestn. Rostov. Gos. Univ. Putei Soovshch., 2015, vol. 60, no. 4, pp. 8–13.
11. Shevtsov, S.N., Saiko, I.B., Kochanowski, V.A., et al., Byull. Izobret., 2009, no. 28.