journal article·2019-03

Structure, as well as the Tribological and Mechanical Properties, of Extrudable Polymer-Polymeriс UHMWPE Composites for 3D Printing

S. V. Panin, D. G. Buslovich, L. A. Kornienko, V. O. Alexenko, Yu. V. Dontsov, S. V. Shil’ko

Journal of Friction and Wear· Volume 40· Issue 2
Publisher page

Abstract

In order to develop dispensable materials for additive manufacturing technologies, the structural and functional analysis of antifrictional polymer-polymer blends based on ultrahigh-molecular weight polyethylene (UHMWPE) are performed. The problem of the optimal selection of polymer plasticizers from the commercially available thermoplastic is solved in order to improve the extrudability of UHMWPE. It is shown that the effective plasticizing filler for UHMWPE from the standpoint of maintaining its tribological and mechanical characteristics and providing the required melt flow index is a double mixture of 10 wt % HDPE-g-SMA + 10 wt % PP. Using the developed materials will make it possible to manufacture parts of a complex shape for tribojoints, including endoprostheses, by the 3D printing method.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Orthopaedic implants and arthroplasty · Injection Molding Process and Properties · Additive Manufacturing and 3D Printing Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (13)

Show source-provided references
1. Borges, R.A., Choudhury, D., and Zou, M., 3D printed PCU/UHMWPE polymeric blend for artificial knee meniscus, Tribol. Int., 2018, vol. 122, pp. 1–7.10.1016/j.triboint.2018.01.065 ↗
2. Panin, S.V., Kornienko, L.A., Alexenko, V.O., Ivanova, L.R., Shil’ko, S.V., and Pleskachevsky, Yu.M., Extrudable composites based on UHMWPE: prospects of application in additive technologies, Nanosci. Technol., 2017, vol. 8, no. 2, pp. 85–94.
3. Song, C., Huang, A., Yang, Y., Wang, D., and Yu, J.-K., Customized UHMWPE tibial insert directly fabricated by selective laser sintering, Int. J. Adv. Manuf. Technol., 2016, vol. 85, pp. 1217–1226. https://doi.org/10.1007/s00170-015-8046-610.1007/s00170-015-8046-6 ↗
4. Khalil, Y., Kowalski, A., and Hopkinson, N., Influence of laser power on tensile properties and material characteristics of laser-sintered UHMWPE, Manuf. Rev., 2016, vol. 15, no. 3, pp. 1–9. https://doi.org/10.1051/mfreview/201601510.1051/mfreview/2016015 ↗
5. Ramli, M.S., Wahab, M.S., Ahmad, M., and Bala, A.S., FDM preparation of bio-compatible UHMWPE polymer for artificial implant, ARPN J. Eng. Appl. Sci., 2016, vol. 11, no. 8, pp. 5473–5480.
6. Md Saidin Wahab, Syed Izzat Hussain Syed Ja’afar, Saifulilrahman Ramli, M., Khairul Nazry Talib, and Mohd Naim Hamid, Laser sintering characteristic of biomaterial UHMWPE for additive manufacturing process, Aust. J. Basic Appl. Sci., 2014, vol. 24, no. 8, pp. 385–391.
7. Mohamad Helmi Bin Md Ansari and Mohd Halim Irwan Bin Ibrahim, Thermal characteristic of waste- derived hydroxyapatite (HA) reinforced ultra high molecular weight polyethylene (UHMWPE) composites for fused deposition modeling (FDM) process, IOP Conf. Ser.: Mater. Sci. Eng., 2017, vol. 165, art. ID 012014.10.1088/1757-899X/165/1/012014 ↗
8. Zhang, Y., Hao, L., Savalani, M.M., Harris, R.A., Di Silvio, L., and Tanner, K.E., In vitro biocompatibility of hydroxyapatite-reinforced polymeric composites manufactured by selective laser sintering, J. Biomed. Mater. Res., Part A, 2008, vol. 91, pp. 1019–1027. https://doi.org/10.1002/jbm.a.3229810.1002/jbm.a.32298 ↗
9. Gupta, A., Tripathi, G., Lahiri, D., and Balani, K., Compression molded ultra high molecular weight polyethylene–hydroxyapatite–aluminum oxide–carbon nanotube hybrid composites for hard tissue replacement, J. Mater. Sci. Technol., 2013, vol. 29, no. 6, pp. 514–522. https://doi.org/10.1016/j.jmst.2013.03.010.10.1016/j.jmst.2013.03.010 ↗
10. Liu, G. and Li, H., Extrusion of ultrahigh molecular weight polyethylene under ultrasonic vibration field, J. Appl. Polym. Sci., 2003, vol. 89, no. 10, pp. 2628–2632. https://doi.org/10.1002/app.12163.10.1002/app.12163 ↗
11. Chang, N., Naik, A.M., and Khaira, H.K., Development of UHMWPE modified PP/PET blends and their mechanical and abrasive wear behavior, Polym. Compos., 2007, vol. 5, pp. 267–272.
12. ISO 5834-4:2005 Implants for Surgery—Ultra-High-Molecular-Weight Polyethylene—Part 4: Oxidation Index Measurement Method, Geneva: Int. Org. Standard., 2005.
13. Lyukshin, B.A., Shil’ko, S.V., Panin, S.V., et al., Dispersno-napolnennye polimernye kompozity tekhnicheskogo i meditsinskogo naznacheniya (Disperse-Filled Polymeric Composites of Technical and Medical Purpose), Novosibirsk: Nauka, 2017.