journal article·2015-01

Mathematical modeling of power spent in face milling taking into consideration tool wear

D. Yu. Pimenov

Journal of Friction and Wear· Volume 36· Issue 1
Publisher page

Abstract

In this paper, a mathematical model has been developed for the main drive power expended in face milling taking into consideration the wear of teeth on the back surface of the tool. The model considers the conditions of cutting, the size of the flank wear of the cutter tooth on the back surface, the properties of the material, and the geometric parameters of the tool. The paper has established the adequacy of the mathematical model of the main drive power expended in face milling. By monitoring the power of the main drive of modern CNC machines, it is possible to control the conditions of face milling in the process of change in the size of the flank wear of the cutter tooth on the back surface.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Engineering Technology and Methodologies · Industrial Engineering and Technologies · Engineering Diagnostics and Reliability

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (15)

Show source-provided references
1. Baro, P.K., Joshi, S.S., and Kapoor, S.G., Modeling of cutting forces in a face-milling operation with self-propelled round insert milling cutter, Int. J. Mach. Tools Manufact., 2005, nos. 7–8, pp. 831–839.
2. Guzeev, V.I. and Pimenov, D.Yu., Cutting force in face milling with tool wear, Russ. Eng. Res., 2011, vol. 31, pp. 989–993.10.3103/S1068798X11090139 ↗
3. Matsumura, T., Shimada, M., Teramoto, K., and Usui, E., Predictive cutting force model and cutting force chart for milling with cutter axis inclination, Int. J. Automat. Technol., 2013, vol. 7, pp. 30–38.10.20965/ijat.2013.p0030 ↗
4. Popov, A.V. and Dugin, A.V., Experimental methods of determining the cutting forces at the tool’s rear surface, Russ. Eng. Res., 2012, vol. 32, pp. 68–69.10.3103/S1068798X12010248 ↗
5. Wen, J., Peng, F.Y., Lin, S., Yan, R., and Liu, Y.Z., Cutting force modeling and prediction in end milling including flank wear, Adv. Mater. Res., 2013, nos. 690–693, pp. 2427–2436.
6. El Kadi, H.A., Deiab, I.M., and Khattab, A.A., On real time prediction of cutting forces using ANN, Int. Rev. Mech. Eng., 2014, vol. 8, pp. 197–208.
7. Tang, D.-H. and Lu, F., A cutting force model for face milling operation, Adv. Mater. Res., 2013, nos. 765–767, pp. 378–381.
8. Liu, E.A. and Zou, Q., Machined surface error analysis a face milling approach, J. Adv. Manufact. Syst., 2011, vol. 10, pp. 293–307.10.1142/S0219686711002211 ↗
9. Granovskii, G.I. and Granovskii, V.G., Rezanie metallov: Uchebnik dlya mashinostr. i priborostr. spets. vuzov (Cutting of Metals. A Tutorial for Spec. High Educ. Inst.), Moscow: Vyssh. Shkola, 1985.
10. Tumanov, A.A., Wear of exchangeable many-sized plates at torsion milling, Vestn. Mos. Gos. Techn. Univ., Stankin, 2012, no. 2, pp. 136–139.
11. D’yakonov, A.A., Improvement of grinding speeds by assessing the machinability of materials, Russ. Eng. Res., 2012, vol. 32, pp. 604–607.10.3103/S1068798X12060068 ↗
12. Spravochnik metallista: Spravochnik v 5-ti tomakh. T. 2. (Metallist Handbook. In 5 vol., Vol. 2), Rakhshtadt, A.G., and Brostrem, V.A., Eds., Moscow: Mashinostroenie, 1976.
13. http://www.dmgmoriseiki.co.jp/en/
14. http://www.pramet.com
15. Spravochnik po matematike dlya inzhenerov i uchashchikhsya vtuzov: Uchebnoe posobie (A Handbook on Mathematics for Engineers and Students of High Educ. Tech. Inst.: A Tutorial), Bronshtein, I.N. and Semendyaev, K.A.), St. Petersburg: Lan’, 2010.