Investigation of the tribological properties of antifrictional aluminum alloys using sclerometry
Source abstract
Abstract
The research is devoted to investigating new aluminum alloys that are promising substitutes of expensive bronzes in friction units. A procedure has been proposed for preselecting experimental alloys using sclerometry. Microcutting stress σ mc was used as a criterion of score resistance. Two alloys based on the Al-Si-Cu-Sn-Pb system, which are closest to BrOTsS 4-4-17 bronze in their mechanical properties, have been selected from the series of test pieces with various compositions. Tribological investigations of the selected alloys by the shaft-partial bushing scheme have been carried out. The test results verified the possibility of using aluminum alloys for bearings as substitutes of bronze at pressures P ≤ 3 MPa. The structure and chemical composition of surface layers both of source samples and of samples after testing have been studied. The effect of the chemical property of the surface on the tribological properties of investigated alloys has been shown.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Material Properties and Applications · Tribology and Wear Analysis · Lubricants and Their Additives
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (11)
Show source-provided references
1. Spravochnik “Trenie, iznashivanie i smazka” (Handbook “Friction, Wear and Lubrication”), Moscow: Mashinostroenie, 1978, vol. 1.
2. Kragel’skii, I.V., Dobychin, M.N., and Kombalov, V.S., Osnovy raschetov na trenie i iznos (Foundations for Friction and Wear Calculations), Moscow: Mashinostroenie, 1977.
3. Kragel’skii, I.V., Trenie i iznos (Friction and Wear), Moscow: Mashinostroenie, 1968.
4. Mikhin, N.M. and Lyapin, K.S., New method study of bearing material friction properties, in Metody ispytaniya i otsenki sluzhebnykh svoistv materialov dlya podshipnikov skol’zheniya (Methods of Tesing and Estimation of Service Properties of Materials for sliding bearings), Moscow: Nauka, 1972, pp. 58–65.
5. Belov, N.A., Fazovyi sostav alyuminievykh splavov (Phase Content of Aluminum Alloys), Moscow: MISIS, 2009.
6. Kotova, E.G., Kurbatkin, I.I., Mironov, A.E., and German, I.S., Research of microstructure and mechanical properties of experimental antifriction alloys (for monometallic sleeve bearings), Tsvetn. Metal., 2013, no. 5, pp. 66–72.
7. Mironov, A.E. and Kotova, E.G., Development of new marks of welded aluminum antifriction alloys for exchange the bronze in joints of friction, Izv. Samarsk. Nauch. Tsentra Ross. Akad. Nauk, 2011, vol. 13, pp. 1136–1140.
8. Alekseev, N.M. and Kragel’skii, I.V., On jamming at friction, Mashinovedenie, 1971, no. 4, pp. 98–102.
9. Gromakovskii, D.G., Makar’yants, M.V., and Tkachenko, S.I., Development of sclerometric method of studying activation of parameters of damage and fracture of friction deformable surfaces, J. Fric. Wear, 2014, vol. 35, pp.25–31.10.3103/S1068366614010048 ↗
10. Kurbatkin, I.I., Belov, N.A., Ozerskii, O.N., Murav’eva, T.I., Stolyarova, O.O., and Alabin, A.N., Tribological and structural study of new aluminum-based antifriction materials, J. Fric. Wear, 2014, vol. 35, pp. 93–97.10.3103/S106836661402007X ↗
11. Stolyarova, O.O., Murav’eva, T.I., Sachek, B.Ya., Mezrin, A.M., and Zagorskii, D.L., Tribological and microscopic studies of new bearing alloys, Proc. 3rd Int. Sci. Conf. “Fundamental Studies and Innovation Technologies in Mechanical Engineering, Moscow: Inst. Mashin. Ross. Akad. Nauk, 2014.