journal article·2014-07

The method of hardening soil rippers by surfacing and technical-economic assessment

V. Jankauskas, E. Katinas, R. Skirkus, V. Alekneviciene

Journal of Friction and Wear· Volume 35· Issue 4
Publisher page

Abstract

The wear resistance and feasibility of applying soil rippers have been studied after surfacing for use in the clayey soil. The study illustrates laboratory and production research of standard and novel (with large grain tungsten carbide) material for manual electric arc surfacing. Hardness and wear resistance in the clayey soil have been determined. Rippers (and the components of soil cultivating machinery yield the least wear by using wear-resistant materials and the comprehensive surfacing of tailing and lateral surfaces. It is shown that hard-alloy tips of rippers are better suited for clayey soil, which is the toughest to cultivate. The best wear resistance in clayey soil is found in hard-alloyed layers of Fe-C-Cr-Si-Mo-Nb-W and Fe-C-Mn-B alloys. The wear rate depends on the depth of cultivation and varies exponentially.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Metal Alloys Wear and Properties · Advanced materials and composites · Surface Treatment and Coatings

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (11)

Show source-provided references
1. Bayhan, Y., Reduction of wear via hardfacing of chisel ploughshare, Tribol. Int., 2006, vol. 39, pp. 570–574.10.1016/j.triboint.2005.06.005 ↗
2. Natsis, A., Petropoulos, G., and Pandazaras, C., Influence of local soil conditions on mouldboard ploughshare abrasive wear, Tribol. Int., 2008, vol. 41, pp. 151–157.10.1016/j.triboint.2007.06.002 ↗
3. Meinel, T., Hart Grubbert Langer, DLZ Agrarmagazin, 2010, no. 1, pp. 7–12.
4. Ren, L.Q., Han, Z.W., Li, J.Q., and Tong, J., Experimental investigation of bionic rough curved soil cutting blade surface to reduce soil adhesion and friction, Soil and Tillage Res., 2006, vol. 85, pp. 1–12.10.1016/j.still.2004.10.006 ↗
5. Horvat, Z., Filipovic, D., Kosutic, S., and Emert, R., Reduction of mouldboard plough share wear by a combination technique of hardfacing, Tribol. Int., 2008, vol. 41, pp. 778–782.10.1016/j.triboint.2008.01.008 ↗
6. Bobobee, E.Y.H. and Gebresenbet, G., Effect of cutting edge thickness and state of wear of ploughshare on draught force and heart rates of Sanga oxen in Ghana, Soil Tillage Res., 2007, vol. 95, pp. 298–307.10.1016/j.still.2007.01.006 ↗
7. Chen, Y. and Ren, X., High performance tool for liquid manure injection, Soil Tillage Res., 2002, vol. 67, pp. 75–83.10.1016/S0167-1987(02)00057-0 ↗
8. Jankauskas, V., Strengthening machine elements working under abrasive environment by alloying with hard layers and their estimation, Mechanika, 2006, vol. 57, pp. 55–60.
9. Jankauskas, V., Kreivaitis, R., Stonkus, D., and Andriusis, A., Research on plough parts strengthening by welding, Mechanika, 2008, vol. 69, pp. 80–84.
10. Jankauskas, V., Varnauskas, V., and Skirkus, R., Composite surface coatings produced by manual metal arc welding electrodes containing tungsten carbide, Mater. Sci., 2014, (in press).
11. Varian, H.R., Intermediate Microeconomics: A Modern Approach, New York: Norton, 2006.