Contact Problem for a Viscoelastic Half-Space and a Rough Rigid Cylinder under the Conditions of Hydrodynamic Lubrication
Source abstract
Abstract
A model has been proposed for use in studying the combined effect of the roughness of a rigid punch and the viscous properties of a base separated by a thin lubricant layer exerted on the characteristics of contact interactions and the sliding friction force. The problem of the motion of a thin a lubricant layer between a fixed rigid cylinder with a regular relief, as well as the surface of a moving viscoelastic half-space, the rheological properties of which are described by an integral operator with an exponential creep kernel, has been considered. The pressure and thickness of the lubricating layer, as well as the deformation component of the frictional force depending on the sliding velocity, have been analyzed. A comparison of the results of solutions of contact problems for viscoelastic and elastic rough bodies in the presence of a lubricant has been presented.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Tribology and Lubrication Engineering · Adhesion, Friction, and Surface Interactions · Gear and Bearing Dynamics Analysis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (13)
Show source-provided references
1. Johnson, K.L., Contact Mechanics, Cambridge: Cambridge Univ. Press, 1985.10.1017/CBO9781139171731 ↗
2. Shi, F. and Salant, R., A mixed soft elastohydrodynamic lubrication model with interasperity cavitation and surface shear deformation, J. Tribol., 2000, vol. 122, pp. 308–316.10.1115/1.555358 ↗
3. Thatte, A. and Salant, R., Transient EHL analysis of an elastomeric hydraulic seal, Tribol. Int., 2009, vol. 42, pp. 1424–1432.10.1016/j.triboint.2009.05.026 ↗
4. Jiankang, W., Anfeng, L., Lee, T. S., Shu, C., and Junmei, W., Operator-splitting method for the analysis of cavitation in liquid-lubricated herringbone grooved journal bearings, Int. J. Numer. Meth. Fluids, 2004, vol. 44, pp. 765–775.10.1002/fld.675 ↗
5. Shinkarenko, A., Kligerman, Y., and Etsion, I., Theoretical analysis of surface textured elastomer sleeve in lubricated rotary sliding, Tribol. Trans., 2010, vol. 53, pp. 376–385.10.1080/10402000903312372 ↗
6. Shinkarenko, A., Kligerman, Y., and Etsion, I., The effect of surface texturing in soft elasto-hydrodynamic lubrication, Tribol. Int., 2009, vol. 42, pp. 284–292.10.1016/j.triboint.2008.06.008 ↗
7. Goryacheva, I.G. and Usov, P.P., Numerical analysis of viscous elastohydrodynamic point contact under stationary conditions, J. Frict. Wear, 2010, vol. 31, no. 1, pp. 1–10.10.3103/S1068366610010010 ↗
8. Goryacheva, I.G. and Usov, P.P., A numerical analysis of the contact of rough viscoelastic bodies in the presence of a layer of viscous lubricant, J. Appl. Math. Mech., 2012, vol. 76, no. 5, pp. 572–581.10.1016/j.jappmathmech.2012.11.008 ↗
9. Aleksandrov, V.M., Goryacheva, I.G., and Torskaya, E.V., Sliding contact of a smooth indenter and a viscoelastic half-space (3D problem), Dokl. Phys., 2010, vol. 55, no. 2, pp. 77–80.10.1134/S1028335810020084 ↗
10. Floberg, L., Cavitation in lubricating oil films, in Cavitation in Real Liquids, Davies, R., Ed., Amsterdam: Elsevier, 1964, pp. 138–146.
11. Goryacheva, I.G., Stepanov, F.I., and Torskaya, E.V., Sliding of a smooth indentor over a viscoelastic halfspace when there is friction, J. Appl. Math. Mech., 2015, vol. 79, no. 6, pp. 596–603.10.1016/j.jappmathmech.2016.04.006 ↗
12. Bakhvalov, N.S., Zhidkov, N.P., and Kobel’kov, G.M., Chislennye metody (Numerical Methods), Moscow: Nauka, 1987.
13. Goryacheva, I.G. and Shpenev, A.G., Modeling of a punch with a regular base relief sliding along a viscoelastic foundation with a liquid lubricant, J. Appl. Math. Mech., 2012, vol. 76, no. 5, pp. 582–589.10.1016/j.jappmathmech.2012.11.007 ↗