Determination of Ultimate Functional Clearances of a Plain Bearing under Hydrodynamic Lubrication Conditions
Source abstract
Abstract
Abstract The article discusses the factors affecting the operation of sliding bearings. It is shown that based on the fundamental principles of hydrodynamic lubrication theory, transitioning from the formula characterizing the load-carrying capacity of the lubricant layer in sliding bearings to the parameters of oil film thickness and clearance allows for the derivation of expressions to determine functional clearances within which the bearing will operate under conditions of hydrodynamic friction. As a result of the calculations conducted for the sliding bearing of the conveyor drive reducer the limiting functional clearances were defined for the use of bushings of various lengths in accordance with GOST ISO 4379–2006. A rational length for the sliding bearing trunnion is justified based on the value of the maximum functional clearance and its influence on the deviation of the center distance in the gear transmission of the reducer. A new H8/f7 fit is proposed instead of the recommended H8/g7 and H8/e7 fits according to GOST ISO 4379–2006, as this will ensure the presence of a hydrodynamic wedge at the beginning of operation and provide the most rational material reserve for wear. The practical significance of the research lies in the applicability of the proposed approach in the design of sliding bearings operating under conditions of hydrodynamic lubrication, aimed at determining the rational length and fit of the mating elements in the bearing assembly.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Tribology and Lubrication Engineering · Technical Engine Diagnostics and Monitoring · Engineering Diagnostics and Reliability
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (15)
Show source-provided references
1. Zakharov, S.M., Hydrodynamic lubrication research: Current situation and future prospects, J. Frict. Wear, 2010, vol. 31, no. 1, pp. 56–67. https://doi.org/10.3103/s106836661001006x10.3103/s106836661001006x ↗
2. Siluyanova, M.V. and Fertikov, A.O., Calculation of the lubrication flowing process in a cylindrical sliding bearing for reducer aviation engine, Aviatsionnaya Promyshlennost, 2019, no. 1, pp. 18–24.10.18287/2541-7533-2019-18-2-75-88 ↗
3. Rolink, A., Jacobs, G., Müller, M., Jakobs, T., and Bosse, D., Investigation of manufacturing-related deviations of the bearing clearance on the performance of a conical plain bearing for the application as main bearing in a wind turbine, J. Phys.: Conf. Ser., 2022, vol. 2257, no. 1, p. 012006. https://doi.org/10.1088/1742-6596/2257/1/01200610.1088/1742-6596/2257/1/012006 ↗
4. Zakharov, S.M., Multiple-support shafts with journal bearings: A simulation and evaluation of their performance, J. Frict. Wear, 2017, vol. 38, no. 3, pp. 195–201. https://doi.org/10.3103/s106836661703015110.3103/s1068366617030151 ↗
5. Ivanov, V.A., Program complex of pressure calculation in lubricated slide bearing layer, Sibirskii Zhurnal Nauki i Tekhnologii, 2018, vol. 19, no. 3, pp. 540–549. https://doi.org/10.31772/2587-6066-2018-19-3-540-54910.31772/2587-6066-2018-19-3-540-549 ↗
6. Akhverdiev, K.S., Aleksandrova, E.E., and Konstantinov, V.A., Hydrodynamic lubrication of a radial bearing of increased bearing capacity with barrel rotation unevenness, Vestnik Donskogo Gosudarstvennogo Tekhnicheskogo Universiteta, 2010, vol. 10, no. 3, pp. 325–329.
7. Jin, Y., A study on distribution rules of dynamics temperature and pressure in plain bearing, Key Eng. Mater., 2013, vol. 567, pp. 91–97. https://doi.org/10.4028/www.scientific.net/KEM.567.9110.4028/www.scientific.net/KEM.567.91 ↗
8. Baş, H., Investigation of the effects of surface roughness on friction behavior in hydrodynamic radial plain bearings, Gümüşhane Üniversitesi Fen Bilimleri Enstitüsü Dergisi, 2022, vol. 12, no. 3, pp. 877–887. https://doi.org/10.17714/gumusfenbil.100620310.17714/gumusfenbil.1006203 ↗
9. Souri, K., Vallejo Maldonado, P.R., Chainov, N.D., and Krasnokutsky, A.N., Hierarchy of methodology for calculating the plain bearing of an internal combustion engine, AIP Conf. Proc., 2022, vol. 2559, p. 20007. https://doi.org/10.1063/5.010035310.1063/5.0100353 ↗
10. Regis, A., Linares, J.-M., Arroyave-Tobon, S., and Mermoz, E., Numerical model to predict wear of dynamically loaded plain bearings, Wear, 2022, vols. 508–509, p. 204467. https://doi.org/10.1016/j.wear.2022.20446710.1016/j.wear.2022.204467 ↗
11. Vela, D.-G., Vela, I., and Miclosina, C.-O., Tribological analysis of a radial plain bearing, Robotica & Management, 2022, vol. 27, no. 1, pp. 41–44. https://doi.org/10.24193/rm.2022.1.810.24193/rm.2022.1.8 ↗
12. Leonov, O.A., Shkaruba, N.Z., Temasova, G.N., Vergazova, Y.G., and Golinitskiy, P.V., Calculation of fit tolerance with clearance to increase relative wear resistance of joints, J. Frict. Wear, 2023, vol. 44, no. 3, pp. 171–177. https://doi.org/10.3103/s106836662303005410.3103/s1068366623030054 ↗
13. Leonov, O.A. and Shkaruba, N.Zh., Calculation of fit tolerance by the parametric joint failure model, J. Mach. Manuf. Reliab., 2020, vol. 49, no. 12, pp. 1027–1032. https://doi.org/10.3103/s105261882012009210.3103/s1052618820120092 ↗
14. Wollmann, T., Nitschke, S., Klauke, T., Behnisch, T., Ebert, C., Füßel, R., Modler, N., and Gude, M., Investigating the friction, wear and damage behaviour of plain bearing bushes of the variable stator vane system, Tribol. Int., 2021, vol. 165, p. 107280. https://doi.org/10.1016/j.triboint.2021.10728010.1016/j.triboint.2021.107280 ↗
15. Romanov, A.B., Palei, M.A., and Braginskii, V.A., Dopuski i posadki: Spravochnik v 2 tomakh (Tolerances and Fits: Reference Book in Two Volumes), St. Petersburg: Politekhnika, 2009.