Evaluation of the Performance of PTFE-Composites as Antifriction Layers in Supporting Parts with a Spherical Segment
Source abstract
Abstract
Abstract— For the primary assessment of the operability of a number of filled polymer composites based on polytetrafluoroethylene (PTFE) as a material of antifriction layers, Brinell hardness, stiffness under free compression up to 10% deformation, stiffness under tight compression up to 160 MPa, friction coefficients and resistance to reverse sliding according to the plane-by-plane scheme of polished austenitic stainless steel were studied at room temperature as a counterbody. Seven types of PTFE-based composites filled with coke, bronze, colloidal graphite, as well as modified carbon fiber with a fluoropolymer coating and various additives (composites of the Superfluvis family) were studied. According to the totality of indicators, the composites of the Superfluvis family are superior to materials filled with coke or bronze, and the material filled with colloidal graphite as the main filler did not pass the tests for resistance to reverse sliding. The performance of the Superfluvis composite based on PTFE PN90 in reverse sliding tests under the pressure of 65 MPa at a distance of 10 000 m has been confirmed.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Tribology and Wear Analysis · Material Properties and Applications · Polymer Science and Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (11)
Show source-provided references
1. Azizinamini, A., Power, E.H., Myers, G.F., and Celik Ozyildirim, H., Bridges for Service Life beyond 100 Years: Innovative Systems, Subsystems and Components, Washington: Natl. Acad. Press, 2014.10.17226/22479 ↗
2. Technical Requirements for Bearing Parts with a Spherical Segment and Antifriction Coating, Introduced by an order of Russian Railways OJSC, 2013, no. 2755p.
3. EAD 050009-00-0301: Spherical and Cylindrical Bearing with Special Sliding Material Made of Fluoropolymer, EOTA, 2017.
4. Adamov, A.A., Keller, I.E., Ostrer, S.G., and Seletkov, D.V., Evaluation of the performance of antifriction PTFE composites at a pressure over 60 MPa. I. Comparison of their hardness and deformation properties under free and constrained compression, Mech. Compos. Mater., 2022, vol. 58, pp. 673–688.10.1007/s11029-022-10058-7 ↗
5. Beloshenko, V.A. and Wozniak, Yu.V., Solid-phase extrusion of polymers using simple shear deformation, Fiz. Tekhnol. Vys. Davl., 2014, vol. 24, no. 2, pp. 95–105.
6. Ipanov, A.S., Adamov, A.A., Svetlakov, A.V., Vasilenko, V.D., Patrakov, I.M., and Nepein, I.V., Reversible friction test facility, RF Patent no. 2 692 130 C2, Byull. Izobret., 2019, no. 18.
7. Shelestova, V.A., Grakovich, P.N., and Zhandarov, S.F., A fluoropolymer coating on carbon fibers improves their adhesive interaction with PTFE matrix, Compos. Interfaces, 2011, vol. 18, no. 5, pp. 419–440.10.1163/156855411X595834 ↗
8. ETA-06/0301 MAURER MSM Spherical and Cylindrical Bearing with Special Sliding Material Made of UHMWPE, 2019.
9. Campbell, T.I., Kong, W.L., and Manning, D.G., Laboratory investigation of the coefficient of friction in the polytetrafluoroethylene slide surface of a bridge bearing, Transp. Res. Rec., 1987, no. 1275, pp. 45–52.
10. Stanton, J.F., Roeder, C.W., and Campbell, T.I., Appendix c: Friction and wear of PTFE sliding surfaces, in High-Load Multi-Rotational Bridge Bearings, NCHRP Report no. 432, Washington, D.C.: TRB, Natl. Res. Council, 1999.
11. Bocklenberg, L., Winkler, K., Mark, P., and Rybarz, S., Low friction sliding planes of greased PTFE for high contact pressures, Open J. Civil Eng., 2016, vol. 6, pp. 105–116.10.4236/ojce.2016.62010 ↗