Influence of Roughness of Working Surfaces of the Wheel–Rail System of Open-Pit Locomotives with an Implementable Adhesion Coefficient
Source abstract
Abstract
The results of theoretical and experimental investigations of the interaction between the working surfaces of wheel treads of open-pit locomotives with rails are presented. The actual values of the height of microroughness when profiling the working surface of the rail head for reducing the running-in period of the wheel–rail system are determined, which positively influences increasing the adhesion coefficient and economic operation life of industrial railway transport. The optimal value of the height of microroughnesses of the interacting surfaces under rail-grinding, which can be within Rz = 40–20 μm, is determined. Guaranteeing the optimal height of microroughnesses of the working surfaces of the wheel–rail system, in turn, will make it possible to calculate the predicted design value of the friction coefficient of the wheel tread of the open-pit locomotive with the rail.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Railway Engineering and Dynamics · Railway Systems and Materials Science · Surface Treatment and Coatings
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (13)
Show source-provided references
1. Demkin, N.B., Kontaktirovanie sherokhovatykh poverkhnostei (Contact of Rough Surfaces), Moscow: Nauka, 1970.
2. Luzhnov, Yu.M., Nanotribologiya stsepleniya koles s rel’sami (Nanotribology of Wheel Hooking with Rails), Moscow: Intekst, 2009.
3. Osnovy tribologii (trenie, iznos, smazka). Uchebnik dlya tekhnicheskikh vuzov (Foundations of Tribology (Friction, Wear, and Lubrication): Manual for High Education Engineering Institutions), Chichinadze, A.V., Ed., Moscow: Nauka i Tekhnika, 1995.
4. Pytko, S. and Furmanik, K., Application of the method of analysis of dimensionalities to study of wear and adhesion in the wheel-rail contact, J. Frict. Wear, 2008, vol. 29, no. 4, pp. 314–317.10.3103/S1068366608040132 ↗
5. Keropyan, A.M., Kantovich, L.I., Voronin, B.V., Kuziev, D.A., and Zotov, V.V., Influence of uneven distribution of coupling mass on locomotive wheel pairs, its tractive power, straight and curved sections of industrial rail tracks. http://iopscience.iop.org/article/10.1088/ 1755-1315/87/6/062005.10.1088/1755-1315/87/6/062005 ↗
6. Kragel’skii, I.V. and Mikhin, N.M., Uzly treniya mashin. Spravochnik (Friction Knots of Machines: Handbook), Moscow: Mashinostroenie, 1984.
7. Garkunov, D.N., Mel’nikov, E.L., and Gavrilyuk, V.S., Tribotekhnika: uchebnoe posobie (Triboengineering: Manual), Moscow: KnoRus, 2011.
8. Kombalov, V.S., Vliyanie sherokhovatosti tverdykh tel na trenie i iznos (Influence of Roughness of Solids on Friction and Wear), Moscow: Nauka, 1974.
9. Keropyan, A.M., The theory of interaction and substantiation of rational parameters of the wheel-rail system of career locomotives in traction mode, Doctoral (Eng.) Dissertation, Yekaterinburg, 2015.
10. Khusu, A.P., et al., Sherokhovatost’ poverkhnostei. Teoretiko-veroyatnostnyi podkhod (Surface Roughness: Theoretical-Probabilistic Approach), Moscow: Nauka, 1975.
11. Grigor’ev, A.Ya., Fizika i mikrogeometriya tekhnicheskikh poverkhnostei (Physics and Microgeometry of Engineering Surfaces), MinskL Belaruskaya Navuka, 2016.
12. Keropyan, A.M., Features of interaction of traction wheels of an electric locomotive and a diesel locomotive with rails in the conditions of Open Mountain works, J. Frict. Wear, 2016, vol. 37, no. 1, pp. 78–82.10.3103/S1068366616010074 ↗
13. Keropyan, A.M. and Gerasimova, A.A., Connection of the temperature in contact area of the wheel-rail system with the railway slope of industrial railway transport, Izv. Vyssh. Uchebn. Zaved., Chern. Metall., 2017, vol. 60, no. 5, pp. 355–363.