journal article·2020-11

Evaluation of Tribotechnical Characteristics for Tribosystems in the Presence of Fullerenes in the Lubricant

V. A. Vojtov, A. G. Kravtsov, B. M. Tsymbal

Journal of Friction and Wear· Volume 41· Issue 6
Publisher page

Abstract

Experimental studies on tribotechnical characteristics of lubricants with fullerene compositions are presented. It has been shown that a reasonable concentration of fullerene additive is represented by 0.75 g of fullerenes and 99.25 g of vegetable oleic oil as a solvent for fullerenes, as well as the further addition of this composition to 1 kg of the base oil, which amounts to 10% as expressed in the volume concentration. Results confirming that fullerene additives improve the antiwear properties of base lubricants by 26.6% are presented. Simultaneously, the range of the lubricant operation with the use of antiwear additives increases by 40.9%. Fullerene additives have no effect on the antiwelding properties of the base lubricant. The use of fullerene additives most efficiently reduces the friction coefficient (by 32.4–86%), as compared to the 20–25% decrease in wear rate. Experimental studies have shown that the line towards reducing the bulk wear rate and the friction coefficient by increasing fullerene additive concentration over 100 g/kg should be considered as inefficient.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Tribology and Wear Analysis · Metal and Thin Film Mechanics · Lubricants and Their Additives

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (11)

Show source-provided references
1. Bezmel’nitsyn, V.N., Eletskii, A.V., and Okun’, M.V., Fullerenes in solutions, Phys.-Usp., 1998, vol. 41, no. 11, pp. 1091–1114.10.1070/PU1998v041n11ABEH000502 ↗
2. Ginzburg, B.M., Baidakova, M.V., Kireenko, O.F., et al., Effect of C60 fullerene, fullerene-containing soot, and other carbon materials on the sliding edge friction of metals, Tech. Phys., 2000, vol. 45, no. 12, pp. 1595–1603.10.1134/1.1333199 ↗
3. Yakh’yaev, N.Ya., Begov, Zh.B., and Batyrmurzaev, Sh.D., New lubricant composition for modification of surfaces of tribo-couplings of a small-sized marine diesel engine, Vestn. Astrakhan. Gos. Tekh. Univ., Ser.: Morsk. Tekhn. Tekhnol., 2009, no. 1, pp. 47–52.
4. Semenov, K.N., Charykov, N.A., Arapov, O.V., et al., Solubility of light fullerenes in some essential and vegetable oils, Khim. Rastit. Syr’ya, 2010, no. 2, pp. 147–152.
5. Kravcov, A.G., Development of a mathematical model for the interaction of electrically active heterogeneous fine-dispersed systems at the interface between the friction surface and the lubricating medium, Probl. Tribol., 2017, vol. 85, no. 1, pp. 89–99.
6. Kravcov, A.G., Modeling the formation of an oil film on the surface in the presence of fullerene additives in a lubricant and its effect on the wear rate of tribosystems, Probl. Tribol., 2018, vol. 87, no. 1, pp. 69–77.
7. Frolenkova, L.Yu. and Shorkin, V.S., Calculation of surface and adhesion energy of elastic bodies, Vestn. Perm. Nats. Issled. Politekh. Univ.,: Mekh., 2013, no. 1, pp. 235–259.
8. Vojtov, V.A. and Bazderkin, V.A., Universal friction machine, Trenie Iznos, 1992, vol. 13, no. 3, pp. 501–506.
9. Vojtov, V.A. and Zakharchenko, M.B., Integral assessment parameter of the tribological properties of lubricants, Zb. Nauk. Pr. Ukr. Derzh. Akad. Zalizn. Transp., 2015, vol. 2, no. 151, pp. 5–10.
10. Vojtov, V.A., Biekirov, A.S., Voitov, A.V., and Tsymbal, B.M., Running-in procedures and performance tests for tribosystems, J. Frict. Wear, 2019, vol. 40, no. 5, pp. 376–383.10.3103/S1068366619050192 ↗
11. Zazhigaev, L.S., Kish’yan, A.A., Romanikov, Yu.I., Metody planirovaniya i obrabotki rezul’tatov fizicheskogo eksperimenta (The Planning and Results Processing of a Physical Experiment), Moscow: Avtomizdat, 1978.