Peculiarities of triboformation of wear-resistant layers on the surface of a MAO-coating modified by fullerenes
Source abstract
Abstract
The paper deals with newly uncovered regularities and the effect of the influence of fullerene C60 incorporated into the surface layer of an MAO-coating on the triboformation of a thin film on its surface. The regularities involve the appearance of specific nanostructures under boundary lubrication conditions; the nanostructures are based on carbon and the phases which contain iron and fullerene and are found in the thin plastic layer formed in friction. This considerably enhances the tribological characteristics of the ceramic coatings: depending on the contact pressure, the friction coefficient is 1.6–3 times lower and the wear resistance is 2.4–7 times higher than those of nonmodified ceramics. The range of the working pressure for the coatings becomes much wider.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Tribology and Wear Analysis · Lubricants and Their Additives · Diamond and Carbon-based Materials Research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (23)
Show source-provided references
1. Vityaz’, P.A., Zhornik, V.I., Kukareko, V.A. et al., Modifitsirovanie materialov i pokrytii nanorazmernymi almazosoderzhashchimi dobavkami (Modification of Materials and Coatings by Nanosized Diamond-Contained Additives), Minsk: Belaruskaya Navuka, 2011.
2. Suminov, I.V., Epel’fel’d, A.V., Lyudin, V.B., et al., Mikrodugovoe oksidirovanie (teoriya, tekhnologiya, oborudovanie) (Microarc Oxidation (Theory, Technology, Equipment)), Moscow: EKOMET, 2005.
3. Komarov, A.I., Shostak, V.N., Komarova, V.I., et al., Production of Brake Devices with Oxidoceramical Coatings of Operating Surfaces, Remont, Vosstanovlenie, Modernizatsiya, 2004, no. 3, pp. 28–32.
4. Komarov, A.I., Goman, A.M., Komarova, V.I., and Shostak, V.N., Oxidoceramics on the Mirror of Aluminum Cylinder without Sockets, Avtomobil’naya Prom-st’, 2005, no. 2, pp. 36–40.
5. Struk, V.A., Rogachev, A.V., Skaskevich, A.A., et al., Nanomaterials and Nanotechnologies for Mechanical Engineering, Materialy, Tekhnologii, Instrumenty, 2002, no. 3, pp. 53–65.
6. Dolmatov, V.Yu., Ul’tradispersnye almazy detonatsionnogo sinteza: poluchenie, svoistva, primenenie (Ultradispersed Diamonds of Detonation Synthesis: Production, Properties. Application), St. Petersburg: S.-Pb. Gos. Politekh. Univ., 2003.
7. Ginzburg, B.M., Baidakova, M.V., Kireenko, O.F., et al., Effect of C60 Fullerene, Fullerene-Containing Soot, and Other Carbon Materials on the Sliding Edge Friction of Metals, Techn. Phys., 2000, vol. 45, no. 12. pp. 1595–1603.10.1134/1.1333199 ↗
8. Kushch, S.D., Komarova, V.I., and Komarov, A.I., Fullerene Niello as an Effective Additive to Lubricating Materials, in Sb. nauch. tr. “Uglerodnye nanostruktury”, (Coll. Papers “Carbon Nanostructures”), Minsk: Inst. Teplo- i Massoobmena NAN Belarusi, 2006.
9. Eletskii, A.V. and Smirnov, B.M., Fullerenes, Phys.-Usp., 1993, vol. 36, no. 3, pp. 202–224.10.1070/PU1993v036n03ABEH002129 ↗
10. Tochil’nikov, D.G. and Ginzburg, B.M., Effect of C60-Contained Additvities to Lubricant Oil on Optivization of Wear Processes at Edge Friction of Metals, Zh. Tekhn. Fiz., 1999, vol. 69, no. 6, pp. 102–105.
11. Komarov, A.I., Komarova, V.I., and Shpilevskii, E.M., Tribotechnical Characteristics of microarc-Oxidated Coatings Modificated by Fullerenes, in Sb. tr. XIV MNTK “Mashinostroenie i tekhnosfera XXI veka”, (Proc. XIV Int. Sci.-Techn. Conf. “Mechanical Engineering and Technjsphere of XXI Century”), Donetsk: Don. Gos. Tekhn. Univ., 2007.
12. Gupta, B.K. and Bhushan, B., Fullerene Particles as an Additive to Liquid Lubricants and Greases for Low Friction and Wear, Lubr. Eng., 1994, no. 7, pp. 524–528.
13. Bhushan, B., Gupta, B.K., van Cleef, G.W., et al., Sublimed C 60 Films for Tribology, Appl. Phys. Lett., 1993, no. 25, pp. 3253–3255.10.1063/1.109090 ↗
14. Komarov, A.I., Komarova, V.I., Kuskova, N.I., and Rud’, A.D., Intensification of Microplasma Discharges at Production of Ceramic Coatings on Aluminum Alloys upon Carbon Nanoparticle Action, Elektron. Obrab. Mater., 2011, no. 1, pp. 24–29.10.3103/S1068375511010108 ↗
15. Vityaz’, P.A., Zhornik, V.I., and Komarov, A.I., Patent Rep. Belarus’ 7607, MPK S25 V 11/06. 2003.
16. Komarov, A.I., Structural Changes in Surface Layers of Microarc Oxidated Coating Doped by Fullerenes at Friction Contact with Steel without Lubricating Materials, Sb. nauch. tr. VII MNTK “Materialy, tekhnologii i oborudovanie v proizvodstve, ekspluatatsii, remonte i modernizatsii mashin” (Proc. VII Int. Sci.-Techn. Conf.: “Materials, Technologies and Equipment in Production, Exploitation, Maintenance and Modernization of Machines”), Novopolotsk: Politekh. Gos. Univ., 2009.
17. Adachi, K.. and Takizawa, R., The Mechanism of Smooth Tribo-Film Formation of Ceramics in Sliding Contact, Proc. Int. Tribology Conf., Yokohama, 1995, pp. 40–44.
18. Senda, T., Xiao, H., and Drennan, J., Plastic Deformation during the Sliding Wear of Alumina Ceramics in Sliding Contact, Proc. Int. Tribology Conf., Yokohama, 1995, pp. 77–80.
19. Krivoglaz, M.A., Difraktsiya rentgenovskikh luchei i neitronov v neideal’nykh kristallakh (X-ray and Neutron Diffraction in Non-Ideal Crystals), Kiev: Naukova Dumka, 1983.
20. Korshunov, L.G., Shabashov, V.A., Chernenko, N.L., and Pilyugin, V.P., Effect of Contact Stresses on the Phase Composition, Strength and Tribological Properties of Nanocrystalline Structures Formed in Steels and Alloys under Sliding Friction, Metal Sci. Heat Treat., 2008, vol. 50, nos. 11–12, pp. 583–592.10.1007/s11041-009-9103-2 ↗
21. Chernogorova, O.P., Drozdova, E.I., Bannykh, O.A., et al., Wear Resistance of Metal Composites Contained in Volume with Diamond-Like Carbon Particles, Russ. Metal. 2003, no. 2, pp. 174–178.
22. Suslov, A.A. and Chizhik, S.A., Scanning Probe Microscopes, Mater., Tekhn., Instrum., 1997, vol. 2, no. 3, pp. 73–89.
23. Mironov, V.L., Osnovy skaniruyushchei zondovoi mikroskopii (Fundamentals of Scanning Probe Microscopy, Nizhni Novgorod: Inst. Fiz. Mikrostruktur Ross. Akad. Nauk, 2004.