journal article·2019-01

Calculation of a Radial Slider Bearing with a Fusible Coating

E. O. Lagunova, M. A. Mukutadze

Journal of Friction and Wear· Volume 40· Issue 1
Publisher page

Abstract

A method for forming an exact self-similar solution to the problem of hydrodynamic calculation of a radial plain bearing that operates in a steady-state friction mode in the presence of a lubricant has been constructed. Based on the equation of motion for a viscous incompressible electrically conducting liquid in the case of a “thin layer,” the continuity equation, and expressions for the dissipation rate of mechanical energy, an analytical relationship for the molten surface profile of fusible coating on a bearing bush taking into account the viscosity and electrical conductivity of a liquid lubricant depending on pressure is obtained. The effect of the parameters characterizing the dependence of viscosity and electrical conductivity on pressure and the effect of a parameter caused by melting the fusible coating surface of the bearing bush exerted on the bearing capacity and friction force are demonstrated.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Engineering Technology and Methodologies · Tribology and Lubrication Engineering · Mechanical Systems and Engineering

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (10)

Show source-provided references
1. Akhverdiev, K.S., Mukutadze, M.A., Lagunova, E.O., and Solop, K.S., Working out of an analytical model of a radial bearing taking into account dependence of viscous characteristics of micropolar lubrication on pressure and temperature, Int. J. Appl. Eng. Res., 2017, vol. 12, no. 15, pp. 4840–4846.
2. Wilson, W.R.D., Lubrication by a melting solid, J. Lubr. Tech., 1976, vol. 98, no. 1, pp. 22–26.10.1115/1.3452765 ↗
3. Beretta, G.P., Niro, A., and Silvestri, M., Solid slider bearings lubricated by their own melting or sublimation, J. Tribol., 1987, vol. 109, no. 2, pp. 296–300.10.1115/1.3261355 ↗
4. Zadorozhnaya, E.A., Solving a thermohydrodynamic lubrication problem for complex-loaded sliding bearings with allowance for rheological behavior of lubricating fluid, J. Mach. Manuf. Reliab., 2015, vol. 44, no. 1, pp. 46–56.10.3103/S1052618814020198 ↗
5. Zernin, M.V., Mishin, A.V., Rybkin, N.N., Shil’ko, S.V., and Ryabchenko, T.V., Consideration of the multizone hydrodynamic friction, the misalignment of axes, and the contact compliance of a shaft and a bush of sliding bearings, J. Frict. Wear, 2017, vol. 38, no. 3, pp. 242–251.10.3103/S1068366617030163 ↗
6. Prikhod’ko, V.M. and Kotel’nitskaya, L.I., Mathematical model of hydrodynamic lubrication used in radial bearing surface melts, Trenie Iznos, 2001, vol. 22, no. 6, pp. 606–608.
7. Vasilenko, V.V., Lagunova, E.O., Mukutadze, M.A., and Prikhodko, V.M., Calculation model of the radial bearing, caused by the melt, taking into account the dependence of viscosity on pressure, Int. J. Appl. Eng. Res., 2017, vol. 12, no. 19, pp. 9138–9148. ISSN 0973-4562.
8. Prokop’ev, V.N., Zadorozhnaya, E.A., Karavaev, V.G., and Levanov, I.G., Improvement of the computation procedure for complex-loaded sleeve bearings lubricated with non-newtonian oils, J. Mach. Manuf. Reliab., 2010, vol. 39, no. 1, pp. 52–55.10.3103/S1052618810010085 ↗
9. Akhverdiev, K.S., Mukutadze, M.A., Lagunova, E.O., and Vasilenko, V.V., Wedge-shaped supports of sliding using micropolar lubricant caused by melting, Vestn. Rostovsk. Gos. Univ. Putei Soobshch., 2017, no. 3 (67), pp. 8–15.
10. Akhverdiev, K.S., Mukutadze, M.A., Lagunova, E.O., and Vasilenko, V.V., Calculated model of wedge-shaped sliding support operating on lubricating material, J. Frict. Wear, 2018, vol. 39, no. 1, pp. 48–54.10.3103/S1068366618010026 ↗