journal article·2017-11

Efficiency Analysis of a Cycloid Reducer Considering Tolerance

Anh-Duc Pham, Hyeong-Joon Ahn

Journal of Friction and Wear· Volume 38· Issue 6
Publisher page

Abstract

High precision reducers such as cycloid reducers have been used to meet the mechanical system requirements of industrial robots for advantages such as: high reduction ratio, large torque capability, and high efficiency. Although efficiency of reducers is one of important performances, there are few studies on efficiency of a cycloid reducer considering its tolerance. This paper presents efficiency analysis of a cycloid reducer with tolerance using the approximate force distribution of an ideal cycloid reducer. First, we present an FE analysis of a cycloid reducer with tolerances. Then, we approximate force distribution of the cycloid reducer with tolerance using an ideal cycloid reducer without any tolerance. The approximated force distribution of the cycloid reducer can be easily calculated using the theory of the ideal cycloid reducer. Finally, efficiency analysis of the cycloid reducer is performed using the approximate force distribution. Tolerance has great effect on efficiency on a cycloid reducer.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Gear and Bearing Dynamics Analysis · Mechanical Engineering and Vibrations Research · Iterative Learning Control Systems

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (15)

Show source-provided references
1. Brogardh, T., Present and future robot control development— an industrial perspective, Ann. Rev. Control, 2007, vol. 31. pp. 69–79.10.1016/j.arcontrol.2007.01.002 ↗
2. Tran, T.L., Pham, A.D. and Ahn, H.J., Lost motion analysis of one stage cycloid reducers considering tolerances, J. Precis. Eng. Manuf., 2016, vol. 17, no. 8, pp. 1009–1016.10.1007/s12541-016-0123-8 ↗
3. Pham, A.D., Tran, T.L., and Ahn, H.J., Hysteresis curve analysis of a cycloid reducer using non-linear spring with a dead zone, J. Precis. Eng. Manuf., 2017, vol. 18, no. 3, pp. 375–380.10.1007/s12541-017-0045-0 ↗
4. Kircanski, N.M. and Goldenberg, A.A., An experimental study of nonlinear stiffness, hysteresis, and friction effects in robot joints with harmonic drives and torque sensors, Int. J. Rob. Res., 1997, vol. 16, no. 2, pp. 214–239.10.1177/027836499701600207 ↗
5. Csoban, A. and Kozma, M., Influence of the oil churning, the bearing and the tooth friction losses on the Efficiency of planetary gears, J. Mech. Eng., 2010, vol. 56, no. 4, pp. 231–238.
6. Bao, J. and He, W., Parametric design and efficiency analysis of the output-pin-wheel cycloid transmission, Int. J. Control Autom., 2015, vol. 8, no. 8, pp. 349–362.10.14257/ijca.2015.8.8.33 ↗
7. Hohn, B.R., Stahl, K. and Gwinner, P, “Improved efficiency for high-ratio planetary gear transmissions, Proc. Int. Conf. on Gears, Munich, 2013.
8. Mihailidis, A., Nerantzis, I. and Athanasopoulos, E., Cycloid and Wolfrom reducers for applications requiring high accuracy, high ratio and high torque rating, Proc. Int. Conf. on Gears, Munich, 2013, pp. 697–708.
9. Malhotra, S.K. and Parameswanran, M.A., Analysis of a cycloid reducer, Mech. Mach. Theor., 1983, vol. 18, no. 6, pp. 491–499.10.1016/0094-114X(83)90066-6 ↗
10. Schafer, I., Bourlier, I., Hantschack, F., Roberts, E.W., Lewis, SD., Forster, D.J. and John, C., Space lubrication and performance of harmonic drive gears, Proc. 11th ESMATS: European Space Mechanisms and Tribology Symp., Lucerne, 2005, pp. 65–72.
11. Mihailidis, A., Athanasopoulos, E. and Agouridas, K., EHL film thickness and load dependent power loss of cycloid reducers, Mech. Mach. Theor., 2016, vol. 230, nos. 7–8, pp. 1303–1317.
12. Blanche, J.G. and Yang, D.C.H., Cycloid drives with machining tolerances, J. Mech., Transm., Autom. Des., 1989, vol. 111, pp. 337–344.10.1115/1.3259004 ↗
13. Yang, D.C.H. and Blanche, J.G., Design and application guidelines for cycloid drives with machining tolerances, Mech. Mach. Theor., 1990, vol. 25, no. 5, pp. 487–501.10.1016/0094-114X(90)90064-Q ↗
14. Ren, Z.Y, Mao, S.M., Guo, W.C, and Guo, Z., Tooth modification and dynamic performance of the cycloidal drive, Mech. Syst. Signal Process., 2017, vol. 85, pp. 857–866.10.1016/j.ymssp.2016.09.029 ↗
15. Lubricant of Rolling Bearing, Herzogenaurach: Schaeffler Technologies, 2013.