Protection of specimens against friction and wear using titanium-based multicomponent nanocomposite coatings: A review
Source abstract
Abstract
A review of the experimental results of studying multicomponent nanocomposite protective coatings of various chemical compositions (TiAlCrYN, TiAlSiBN, TiAlSiCuN, CrTiAlSiN, and TiHfSiN/NbN/Al2O3) developed in recent years is presented. An analysis of the available data on the chemical composition, hardness, oxidation resistance, thermal stability, friction, wear, adhesion strength, and corrosion properties of nanocomposite coatings with high physicomechanical characteristics is carried out. The application of the nanocomposite coatings in industry is exemplified using the performance characteristics of drills made from a high-speed steel covered with a multicomponent protective coating.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Metal and Thin Film Mechanics · Advanced materials and composites · Diamond and Carbon-based Materials Research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (41)
Show source-provided references
1. Azarenkov, N.A., Sobol’, O.V., Pogrebnyak, A.D., Beresnev, V.M., Litovchenko, S.V., and Ivanov, O.N., Materialovedenie neravnovesnogo sostoyaniya modifitsirovannoi poverkhnosti: monografiya (Materials Science Aspects of Nonequilibrium State of Modified Surfaces: Monograph), Sumy: Sumskii Gos. Univ., 2012.
2. Bhushan, B., Nanotribology, nanomechanics and nanomaterials characterization, Phil. Trans. R. Soc., A., 2008, vol. 366, pp. 1351–1381.10.1098/rsta.2007.2163 ↗
3. Khomenko, A.V. and Lyashenko, Ya.A., Statistical theory of boundary friction of atomically smooth solid surfaces separated by lubricating film, Phys. Usp., 2012, vol. 55, pp. 1008–1034.10.3367/UFNe.0182.201210f.1081 ↗
4. Khomenko, A.V. and Prodanov, N.V., Molecular dynamics of cleavage and flake formation during the interaction of a graphite surface with a rigid nanoasperity, Carbon, 2010, vol. 48, pp. 1234–1243.10.1016/j.carbon.2009.11.046 ↗
5. Pogrebnyak, A.D., Ponomarev, A.G., Shpak, A.P., and Kunitskii, Yu.A., Use of micro- and nanoprobes for analysis small-sized 3D materials, nanosystems, and nanoobjects, Phys. Usp., 2012, vol. 55, pp. 270–300.10.3367/UFNe.0182.201203d.0287 ↗
6. Koltunowicz, T.N., Zhukowski, P., Fedotova, V.V., Saad, A.M., and Fedotov, A.K., Hopping conductance in nanocomposites (Fe0.45Co0.45Zr0.10)x(Al2O3)1 − x manufactured by ion-beam sputtering of complex target in Ar + O2 ambient, Acta Phys. Polonica, A, 2011, vol. 120, no. 1, pp. 39–42.10.12693/APhysPolA.120.39 ↗
7. Hosson, J.T. and Cavaleiro, A., Nanostructured Coatings (Nanostructure Science and Technology), Springer Science + Business Media, LLC, 2006.
8. Veprek, S., The search for novel, superhard materials, J. Vac. Sci. Technol., A., 1999, vol. 17, no. 5, p. 2401.10.1116/1.581977 ↗
9. Musil, J., Hard and superhard nanocomposite coatings, Surf. Coat. Technol., 2000, vol. 125, pp. 322–330.10.1016/S0257-8972(99)00586-1 ↗
10. Pogrebnyak, A.D., Shpak, A.P., Azarenkov, N.A., and Beresnev, V.M., Structure and properties of hard and superhard nanocomposite coatings, Phys. Usp., 2009, vol. 52, no. 1, pp. 29–54.10.3367/UFNe.0179.200901b.0035 ↗
11. Pogrebnjak, A.D., Il’yashenko, M.V., Kaverin, M.V., et al., Physical and mechanical properties of the nanocomposite and combined Ti-N-Si/WC-Co-Cr/ and Ti-N-Si/(Cr3C2)75-(NiCr) coatings, J. Nano-Electron. Phys., 2009, no. 4, pp. 101–110.
12. Larkin, A.V., Fedotov, A.K., Fedotova, J.A., Koltunowicz, T.N., and Zhukowski, P., Temperature and frequency dependences of impedance real part in the FeCoZr-doped PZT nanogranular composites, Mater. Sci.-Poland, 2012, vol. 30, no. 2, pp. 75–81.10.2478/s13536-012-0015-2 ↗
13. Helmersson, U., Todorova, S., Barnett, S.A., Sundgren, J.E., Markert, L.C., et al., Growth of singlecrystal TiN/VN strained-layer superlattices with extremely high mechanical hardness, J. of Appl. Phys., 1987, vol. 62, p. 481.10.1063/1.339770 ↗
14. Veprek, S. and Reiprich, S., A concept for the design of novel superhard coatings, Thin Solid Films, 1995, vol. 268, pp. 64–71.10.1016/0040-6090(95)06695-0 ↗
15. PalDey, S. and Deevi, S.C., Single layer and multilayer wear resistant coatings of (Ti,Al)N: a Review, Mater. Sci. Eng., A., 2003, vol. 342, pp. 58–79.10.1016/S0921-5093(02)00259-9 ↗
16. Huq, M.Z. and Celis, L.B., Reproducibility of friction and wear results in ball-on-disc unidirectional sliding tests of TiN-alumina pairings, Wear, 1997, vol. 212, pp. 151–159.10.1016/S0043-1648(97)00167-1 ↗
17. Vmcoille, E., Celis, J.P., and Roos, J.R., Dry sliding wear of tin based ternary PVD coatings, Wear, 1993, vol. 165, pp. 41–49.10.1016/0043-1648(93)90370-2 ↗
18. Mo, J.L., Zhu, M.H., Lei, B., et al., Comparison of tribological behaviours of AlCrN and TiAlN coatings deposited by physical vapor deposition, Wear, 2007, vol. 263, pp. 1423–1429.10.1016/j.wear.2007.01.051 ↗
19. Zhang, W. and Smith, J.R., Stoichiometry and adhesion of Nb/Al2O3, Phys. Rev., B., 2000, vol. 61, pp. 16883–16889.10.1103/PhysRevB.61.16883 ↗
20. Liang, Sh.-Ch., Tsai, D.-Ch., Chang, Z.-Ch., et al., Thermally stable TiVCrZrHf nitride films as diffusion barriers in copper metallization, Electrochem. Solid-State Lett., 2012, vol. 15, no. 1, pp. H5–H8.10.1149/2.012201esl ↗
21. Luo, Q., Zhou, Z., Rainforth, W.M., and Bolton, M., Effect of tribofilm formation on the dry sliding friction and wear properties of magnetron sputtered TiAlCrYN coatings, Tribol. Lett., 2009, vol. 34, no. 2, pp. 113–124.10.1007/s11249-009-9415-9 ↗
22. Shi, J., Muders, C.M., Kumar, A., Jiang, X., Pei, Z.L., Gong, J., and Sun, C., Study on nanocomposite Ti-Al-Si-Cu-N films with various Si contents deposited by cathodic vacuum arc ion plating, Appl. Surf. Sci., 2012, vol. 258, pp. 9642–9649.10.1016/j.apsusc.2012.06.002 ↗
23. Veprek, S., Mnling, H.D., Jilek, M., and Holubar, P., Avoiding the high-temperature decomposition and softening of (Al1 − x Tix)N coatings by the formation of stable superhard nc-(Al1 − x Tix)N/a-Si3N4 nanocomposite, Mater. Sci. Eng., A., 2004, vol. 366, pp. 202–205.10.1016/j.msea.2003.08.052 ↗
24. Carvalho, S., Rebouta, L., Cavaleiro, A., Rocha, L.A., Gomes, J., and Alves, E., Microstructure and mechanical properties of nanocomposite (Ti, Si, Al)N coatings, Thin Solid Films, 2001, vols. 398–399, pp. 391–396.10.1016/S0040-6090(01)01348-7 ↗
25. Chang, C.-L., Lee, J.-W., and Tseng, M.-D., Microstructure, corrosion and tribological behaviors of Ti-Al-Si-N coatings deposited by cathodic arc plasma deposition, Thin Solid Films, 2009, vol. 517, pp. 5231–5236.10.1016/j.tsf.2009.03.082 ↗
26. Yu, D., Wang, C., Cheng, X., and Zhang, F., Microstructure and properties of Ti-Al-Si-N coatings prepared by hybrid PVD technology, Thin Solid Films, 2009, vol. 517, pp. 4950–4955.10.1016/j.tsf.2009.03.091 ↗
27. Barshilia, H.C., Acharya, S., and Ghosh, M., Performance evaluation of TiAlCrYN nanocomposite coatings deposited using four-cathode reactive unbalanced pulsed direct current magnetron sputtering system, Vacuum, 2010, vol. 85, pp. 411–420.10.1016/j.vacuum.2010.08.003 ↗
28. Musil, J., Vlcek, J., and Zeman, P., Hard amorphous nanocomposite coatings with oxidation resistance above 1000°C, Adv. Appl. Ceram., 2008, vol. 107, no. 3, pp. 148–154.10.1179/174367508X306460 ↗
29. Fox-Rabinovich, G.S., Yamamoto, K., Beake, B.D., et al., Emergent behavior of nano-multilayered coatings during dry high-speed machining of hardened tool steels, Surf. Coat. Technol., 2010, vol. 204, pp. 3425–3435.10.1016/j.surfcoat.2010.04.002 ↗
30. Lewis, D.B., Donohue, L.A., and Lembke, M., The influence of the yttrium content on the structure and properties of Ti1 − x − y − z AlxCryYzN PVD hard coatings, Surf. Coat. Technol., 1999, vol. 114, pp. 187–199.10.1016/S0257-8972(99)00047-X ↗
31. Chang Y.-Y. and Hsiao C.-Y. High temperature oxidation resistance of multicomponent Cr-Ti-Al-Si-N coatings, Surf. Coat. Technol., 2009, vol. 204, 992–996.10.1016/j.surfcoat.2009.04.009 ↗
32. Paternoster, C., Fabrizi, A., Cecchini, R., Kiryukhantsev-Korneev, Ph.V., Sheveyko, A., and Spigarelli, S., Thermal evolution and mechanical properties of hard Ti-Cr-B-N and Ti-Al-Si-B-N coatings, Surf. Coat. Technol., 2008, vol. 203, pp. 736–740.10.1016/j.surfcoat.2008.08.013 ↗
33. Komarov, F.F., Kamarou, A.A., Zukowski, P., Karwat, Cz., Sielanko, J., Kozak, Cz.M., and Kiszczak, K., Ion beam assisted deposition of metals layers using a novel one beam system, Vacuum, 2003, vol. 70, pp. 215–220.10.1016/S0042-207X(02)00645-0 ↗
34. Zukowski, P., Komarov, F.F., Karwat, Cz., Kistczak, K., Kozak, Cz., et al., Depth distribution of elements in monoatomic and compound coatings deposited onto copper and silicon by IBAD, Vacuum, 2009, vol. 83, pp. 204–207.10.1016/j.vacuum.2009.01.064 ↗
35. Bull, S.J., Rice-Evans, P.C., and Saleh, A., et al., Slow positron annihilation studies of defects in metal implanted tin coatings, Surf. Coat. Technol., 1997, vol. 91, pp. 7–12.10.1016/S0257-8972(96)03122-2 ↗
36. Bull, S.J., Failure mode maps in the thin film scratch adhesion test, Tribol. Int., 1997, vol. 30, no. 7, pp. 491–498.10.1016/S0301-679X(97)00012-1 ↗
37. Pogrebnyak, A.D., Beresnev, V.M., Kaverina, A.Sh., Shypylenko, A.P., Kolisnichenko, O.V., Oyoshi, K., Takeda, Y., Murakami, H., Kolesnikov, D.A., and Prozorova, M.S., Formation of superhard Ti-Hf-Si-N/NbN/Al2O3 multilayer coatings for highly effective protection of steel, Tech. Phys. Lett., 2013, vol. 39, no. 2, pp. 189–192.10.1134/S1063785013020223 ↗
38. Chang Y.-Y. and Hsiao C.-Y., High temperature oxidation resistance of multicomponent Cr-Ti-Al-Si-N coatings, Surf. Coat. Technol., 2009, vol. 204, pp. 992–996.10.1016/j.surfcoat.2009.04.009 ↗
39. Veprek, S., Maritza Veprek-Heijman, J.G., Industrial applications of superhard nanocomposite coatings, Surf. Coat. Technol., 2008, vol. 202, pp. 5063–5073.10.1016/j.surfcoat.2008.05.038 ↗
40. Kok, Y.N., Hovsepian, P.Eh., Luo, Q., Lewis, D.B., Wen, J.G., and Petrov, I., Influence of the bias voltage on the structure and the tribological performance of nanoscale multilayer C/Cr PVD coatings, Thin Solid Films, 2005, vol. 475, nos. 1–2, pp. 219–226.10.1016/j.tsf.2004.08.042 ↗
41. Luo, Q., Robinson, G., Pittman, M., Howarth, M., Sim, W.M., Stalley, M.R., et al., Performance of nanostructured multilayer PVD coating TiAlN/VN in dry high speed milling of aerospace aluminium 7010-T7651, Surf. Coat. Technol., 2005, vol. 200, pp. 123–127.10.1016/j.surfcoat.2005.02.017 ↗