Principles for developing grinding media with increased wear resistance. Part 1. Abrasive wear resistance of iron-based alloys
Source abstract
Abstract
Laboratory tests of iron-based alloys for abrasive wear show that the best wear resistance of the alloys with both the martensite and austenite metallic matrix is achieved in the iron-carbon system. The greater the content of alloying elements in the austenite, the more pronounced is the reduction of its wear resistance due to alloying. It is revealed that the content of the alloying elements in the wear-resistant alloys for grinding media must be as low as possible, but yet sufficient to ensure the required manufacturability of articles.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Advanced machining processes and optimization · Metal Alloys Wear and Properties · Advanced materials and composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (22)
Show source-provided references
1. Efremenko, A.V., Increase of Shock-Abrasive Wear-Resistance of Steels in Water Corrosion-Active Media by Improvement of Chemical Content and Microstructure, Cand. Sci. (Eng.) Dissertation, Mariupol, 2011, PGTU.
2. Tsypin, I.I., Belye iznosostoikie chuguny. Struktura i svoistva (White Wear-Resistant Cast Irons: Structure and Properties), Moscow: Metallurgiya, 1983.
3. Hawk, J.A., Wilson, R.D., Danks, D.R., and Kiser, M.T., Abrasive Wear Failures, in ASM Handbook. Vol. 11: Failure Analysis and Prevention, ASM, 2002, pp. 906–921.10.31399/asm.hb.v11.a0003560 ↗
4. Bogachev, I.N. and Mints, R.I., Kavitatsionnoe razrushenie zhelezouglerodistykh splavov (Cavitation Destruction of Iron-Carbon Alloys), Moscow: Mashgiz, 1959.
5. Malinov, L.S. and Malinov, V.L., Ekonomnolegirovannye splavy s martensitnymi prevrashcheniyami i uprochnyayushchie tekhnologii (Economically Alloyed Metastable Alloys with Martensite Transformations and Strengthening Technologies), Kharkov: NNTs KhFTI, 2007.
6. Cheilyakh, A.P., Ekonomnolegirovannye metastabil’nye splavy i uprochnyayushchie tekhnologii (Economically Alloyed Metastable Alloys and Strengthening Technologies), Mariupol: PGTU, 2009.
7. Filippov, M.A., Litvinov, V.S., and Nemirovskii, Yu.R., Stali s metastabil’nym austenitom (Steels with Metastable Austenite), Moscow: Metallurgiya, 1988.
8. Popov, V.S., Brykov, N.N., and Dmitrichenko, N.S., Iznosostoikost’ pressform ogneupornogo proizvodstva (Wear-Resistance of Refractory Production Pressforms), Moscow: Metallurgiya, 1971.
9. Popov, V.S., Brykov, N.N., Dmitrichenko, N.S., and Pristupa, P.G., Dolgovechnost’ oborudovaniya ogneupornogo proizvodstva (Durability of Refractory Production Equipment), Moscow: Metallurgiya, 1978.
10. Schastlivtsev, V.M. and Filippov, M.A., Role of the Bogachev-Mints Concept of Metastability of Austenite in Choosing Wear-Resistant Materials, Met. Sci. Heat Treat., 2005, vol. 47, no. 1–2, pp. 3–5.10.1007/s11041-005-0020-8 ↗
11. Brykov, M.N., Abrasive Wear of Iron-Carbon Alloys, J. Friction Wear, 2006, vol. 27, no. 1, pp. 89–95.
12. Gulyaev, A.P., Metallovedenie (Metal Science), Moscow: Metallurgiya, 1977.
13. Vorob’ev, V.G. and Gulyaev, A.P., Influence of Alloyed Elements on the Martensite Transformation Temperature. I, Zh. Tekh. Fiz., 1951, vol. 21, no. 10, pp. 1157–1163.
14. Koval’, A.D. and Brykov, M.N., Abrasive Wear of Ferricarbonic Alloys during Frictional Heating, J. Friction Wear, 2010, vol. 31, no. 3, pp. 228–233.10.3103/S1068366610030116 ↗
15. Khrushchov, M.M. and Babichev, M.A., Issledovaniya iznashivaniya metallov (Study of Metal Wear), Moscow: Akad. Nauk SSSR, 1960.
16. Mirzaev, D.A., Koryagin, Yu.D., and Okishev, K.Yu., Effect of Metallurgy Factors on the Mechanical Properties and Wear-Resistance of Cast Manganous Steels, Fiz. Khim. Tekhnol. Neorg. Mater., 1999, no. 3, pp. 18–22.
17. Kachanov, N.N., Prokalivaemost’ stali (Hardenability of Steel), Moscow: Metallurgiya, 1964.
18. Popov, A.A. and Popova, L.E., Izotermicheskie i termokineticheskie diagrammy raspada pereokhlazhdennogo austenite (Isothermal and Thermokinetic Diagrams of Undercooled Austenite Desintegration), Moscow: Metallurgiya, 1965.
19. Gudremon, E., Especial Steel, Berlin: Springer-Verlag, 1956; Moscow: Metallurgiya, 1966.
20. Makarov, A.V., Korshunov, L.G., Kogan, L.Kh., et al., Abrasive Wear Resistance of Carbon and Low-Alloy Tool Steels and Its Evaluation by the Nondestructive Methods, J. Friction Wear, 1998, vol. 19, no. 5, pp. 633–641.
21. Brykov, N.N. and Brykov, M.N., Peculiarities of Steel and Alloy Wear upon High Pressures of Abrasive Mass, Probl. Tribol., 1997, no. 3, pp. 26–32.
22. Petrakov, O.V. and Poddubnyi, A.N., Structure of Wear-Resistant Alloyed White Irons, Met. Sci. Heat Treat., 2007, vol. 49, nos. 7–8, pp. 409–411.10.1007/s11041-007-0077-7 ↗