journal article·2019-11

Antifriction Nanocomposite Coatings that Contain Magnesium Carbide

V. P. Babak, V. V. Shchepetov, S. D. Harchenko

Journal of Friction and Wear· Volume 40· Issue 6
Publisher page

Abstract

The results of studying the characteristics of friction and wear of the developed detonation nano-component coatings of Fe–Ti–SiC that also contain MgC2, are presented. Due to the interrelation of thermal and mechanical fluctuations, magnesium carbide thermally decomposes and forms structurally free α‑graphite. This graphite creates a surface antifriction layer, which minimizes the contact parameters. In the study of the wear resistance of detonation coatings of nanocomponent powders, samples with coatings of the tungsten-containing VK15 hard alloy were tested for comparison using similar programs, as well as coatings sprayed with nichrome alloyed powder. Modern physical and chemical methods studied the qualitative and quantitative composition of the surface layers. The developed nano-component coatings of Fe–Ti–SiC–MgC2 showed high antifriction characteristics in the entire load-velocity range, simulating the operation of the friction unit in real conditions. It is shown that the means of controlling wear and ensuring high performance is the presence of both a thin film layer of graphite and the formation of fine secondary structures. This provides the modification of the friction surface and protects against unacceptable plastic deformation processes.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Tribology and Wear Analysis · Metal and Thin Film Mechanics · Lubricants and Their Additives

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (11)

Show source-provided references
1. Tunik, A.Yu., Structural features of antifriction coatings with additives of solid lubricants obtained by various spraying methods, Visn. Priazov. Derzh. Tekh. Univ., 2012, no. 25, pp. 163–169.
2. Bolsunovskaya, T.A., Efimochkin, I.Yu., Sevast’yanov, N.V., et al., The influence of the brand of graphite as a solid lubricant on the tribological properties of the metal composite material, Tr. Vseross. Nauchno-Issled.Inst. Aviats. Mater., 2018, vol. 67, no. 7, pp. 69–76.
3. Dinzhos, R.V., Fialko, N.M., and Lysenkjv, E.M., Analysis of the thermal conductivity of polymer nanocomposites filled with carbon nanotubes and carbon black, J. Nano-Electron.Phys., 2014, vol. 6, no. 1, pp. 1015–1021.
4. Frolov, E.A., Kravchenko, S.I., and Bondar’, O.V., Improvement of the performance characteristics of construction machines, equipment, and technological tooling, Nauk. Prats. Poltavsk. Nats. Tekh. Univ. im. Yu. Kondratyuka, Ser.: Galuzeve Mashinobuduv., Budvnits., 2013, no. 1 (1), pp. 176–182.
5. Materials under Extreme Conditions: Recent Trends and Future Prospects, Tyagi, A.K. and Banerjee, S., Eds., Amsterdam: Elsevier, 2017.
6. Dragobetskii, V.V., Shapoval, A.A., Mospan, D.V., Trotsko, O.V., and Lotous, V.V., Excavator bucket teeth strengthening using a plastic explosive deformation, Metall. Min. Ind., 2015, vol. 4, pp. 363–368.
7. Mustafaev, S.M., Sharifova, A.V., and Guliev, A.A., Development of copper-graphite composition with a high content of graphite, Progr. Tekhnol. Sist. Mashinobuduv., 2013, no. 1–2 (45), pp. 187–191.
8. Babak, V.P., Shchepetov, V.V., and Astahov, E.A., Wear resistance of amorphous-crystalline detonation coatings with solid lubricant additive in vacuum, J. Frict. Wear, 2017, vol. 38, no. 1, pp. 65–70.10.3103/S1068366617010020 ↗
9. Shchepetov, V.V., Nedaiborshch, S.D., Babak, V.P., and Astahov, E.A., UA Patent 115482, Byull. Izobret., 2017, no. 8.
10. Korniyenko, B.Y. and Osipa, L.V., Identification of the granulation process in the fluidized bed, ARPN J. Eng. Appl. Sci., 2018, vol. 13, no. 14, pp. 4365–4370.
11. Bulgarevich, S.B., Boiko, M.V., and Lebedinskii, K.S., Fiziko-khimiya mekhanoaktivatsii v zone friktsionnogo kontakta (Physical Chemistry of Mechanical Activation in the Area of Frictional Contact), Saarbrucken: LAP Lambert Academic, 2013.