Wear resistance of composites based on hybrid UHMWPE–PTFE matrix: Mechanical and tribotechnical properties of the matrix
Source abstract
Abstract
In order to develop biocompatible antifriction composites based on UHMWPE the mechanical and tribotechnical characteristics of a hybrid polymer matrix in the form of a mixture (blend) of UHMWPE with polytetrafluoroethylene (PTFE) have been studied under dry friction, boundary lubrication, and abrasive wear. It has been shown that the wear rate of the material under dry sliding friction was reduced more than twofold compared with pure UHMWPE. However, the mechanical characteristics have changed insignificantly. Under the boundary lubrication (distilled water), the wear resistance of the matrix material is similar to that for dry sliding friction. Under abrasive wear, the durability of the composites differs a little from that for pure UHMWPE. The mechanisms of wear of the polymer blend UHMWPE–PTFE under dry sliding friction and abrasive wear have been discussed.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Tribology and Wear Analysis · Polymer Science and Applications · Orthopaedic implants and arthroplasty
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (11)
Show source-provided references
1. Krasnov, A.P., Aderikha, V.N., Afonicheva, O.V., Mit’, V.A., Tikhonov, N.N., Vasil’kov, A.Yu., SaidGaliev, E.E., Naumkin, A.V., and Nikolaev, A.Yu., Categorization system of nanofillers to polymer composites, J. Friction Wear, 2010, vol. 31, pp. 68–80.10.3103/S1068366610010071 ↗
2. Gogoleva, O.V., Okhlopkova, A.A., and Petrova, P.N., Wear-resistant composition materials on the base of super–high–molecular polyethylene for exploitation in extreme conditions, Materialovedenie, 2011, no. 9, pp. 10–13.
3. Stein, H.L., Ultra High Molecular Weight Polyethylene (UHMWPE), Engineered Materials Handbook, Vol. 2. Engineering Plastics 1999.
4. Galetz, M.C., Blar, T., Ruckdaschel, H., Sandler, K.W., and Alstadt, V., Carbon nanofibre-reinforced ultrahigh molecular weight polyethylene for tribological applications, J. Appl. Polym. Sci., 2007, vol. 104, pp. 4173–4181.10.1002/app.26058 ↗
5. Panin, S., Kornienko, L., Sonjaitham, N., Tchaikina, M., Sergeev, V., Ivanova, L., and Shilko, S., Wear resistant ultra–high molecular weight polyethylene based nano-and microcomposites for implants, J. Nanotechnol., 2012, no. 1, Sp. Iss. Nanocomp., Article ID 72975610.1155/2012/729756 ↗
6. Zoo, V.S., An, J.-W., Lim, D.-Ph., and Lim, D.-S., Effect of carbon nanotube addition on tribological behavior of UHMWPE, Tribol. Lett., 2004, vol. 16, pp. 305–309.10.1023/B:TRIL.0000015206.21688.87 ↗
7. Myshkin, N.K., Petrokovets, M.I., and Kovalev, A.V., Tribology of polymers: Adhesion, friction, wear and mass-trasfer, Tribol. Int., 2005, vol. 38, pp. 910–921.10.1016/j.triboint.2005.07.016 ↗
8. Briscoe, B., Wear of polymers: An essay on fundamental aspects, Tribol. Int., 1981, vol. 14, pp. 231–243.10.1016/0301-679X(81)90050-5 ↗
9. Myshkin, N.K. and Kovalev, A.V., Adhesion and Friction of Polymers of Polymer Tribology, Sinha, S.K. and Briscoe, B.J., Eds., Imperial College, 2009, pp. 3–32.
10. Krasnov, A.P., Mit’, V.A., Afonicheva, O.V., Rashkovan, I.A., and Kazakov, M.E., Tribochemical active and tribostable polymer and polymeric systems, J. Frict. Wear, 2002, vol. 23, pp. 397–410.
11. Panin, S.V., Kornienko, L.A., Sondzhaitam, N., Ivanova, L.R., and Shil’ko, S.V., Abrasive wear of micro- and nanocomposites based on super–high–molecular polyethylene (SHMPE). Part I. Composites based on SHMPE filled with microparticles AlO(OH) and Al2O3, J. Frict. Wear, 2012, vol. 33, 381–387.10.3103/S1068366612050091 ↗