journal article·2026-05-23

Assessing the impact of fuel moisture content and incident heat flux on fire behavior for Leylandii cypress in small-scale laboratory experiments

Bruno Guillaume, Benjamin Besson, Mohamad El Houssami, Virginie Dréan, Jacky Fayad

Publisher page

Abstract

Laboratory experiments were conducted on fresh Leylandii cypress leaves and small branches to evaluate fire behavior sensitivity to fuel moisture content and incident heat flux. Cone calorimetry combined with Fourier transform infrared spectroscopy provided novel insights into ignition dynamics, heat release, and emissions of water vapor, CO, and CO 2 . Fire behavior exhibited either a single ignition (leading directly to flaming), typical of higher fuel moisture content and incident heat flux, or an initial global ignition followed by localized ignitions, typical of lower fuel moisture content and incident heat flux. Peak heat release rate per unit mass and effective heat of combustion decreased on average with increasing fuel moisture content. At high fuel moisture content, CO, and water vapor concentrations were elevated before the first ignition and remained high afterward. Water vapor showed small peaks during flaming phases.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Fire dynamics and safety research · Fire effects on ecosystems · Combustion and flame dynamics

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Efectis France, Saint-Aubin, France

References (41)

Show source-provided references
1. 10.1071/WF0712110.1071/WF07121 ↗
2. El Houssami M. Development of a numerical and experimental framework to understand and predict the burning dynamics of porous fuel beds. PhD Thesis University of Edinburgh UK 2016.
3. 10.2737/INT-RP-43810.2737/INT-RP-438 ↗
4. Prince DR, Fletcher TH. A combined experimental and theoretical study of the combustion of live vs. dead leaves. In: 8th US national combustion meeting of the combustion institute, Park City, UT, 19–22 May 2013.
5. Lamorlette A El Houssami M Morvan D. An improved non-equilibrium model for the ignition of living fuel. Int J Wildland Fire 2018; 27(1): 29–41. https//doi.org/10.1071/WF1702010.1071/WF17020 ↗
6. Lykov AV. Theory of drying. Energiya, 1968, p. 470.
7. Romanovskiy SG. Processes of heat treatment of moist materials. Energiya, 1976, p. 328.
8. Grishin AM. Mathematical modeling of forest fires and new methods of fighting them. Publishing House of the Tomsk State University, 1996.
9. 10.1007/s00267-013-0067-z10.1007/s00267-013-0067-z ↗
10. 10.1071/WF0900810.1071/WF09008 ↗
11. 10.1007/s11676-020-01162-210.1007/s11676-020-01162-2 ↗
12. Chastagner G. Flammability of cut Christmas trees. In: IAAI annual general meeting, Atlantic City, NJ, 9–11 August 2001, pp. 1–29. IAAI.
13. Luciani C Tihay-Felicelli V Martinent B et al. Influence of fuel moisture content on the burning of cistus shrubs exposed to a low-intensity fire. Fire Saf J 2024; 146: 104168. https://doi.org/10.1016/j.firesaf.2024.10416810.1016/j.firesaf.2024.104168 ↗
14. 10.1139/x05-25310.1139/x05-253 ↗
15. 10.1071/WF1604210.1071/WF16042 ↗
16. Fletcher TH Pickett BM Smith SG et al. Effects of moisture on ignition behavior of moist California chaparral and Utah leaves. Combust Sci Technol 2007; 179(6): 1183–1203. https://doi.org/10.1080/0010220060101557410.1080/00102200601015574 ↗
17. Fazeli HF Jolly WM Blunck DL. Stages and time-scales of ignition and burning of live fuels for different convective heat fluxes. Fuel 2022; 324: 124490. https://doi.org/10.1016/j.fuel.2022.12449010.1016/j.fuel.2022.124490 ↗
18. Fazeli H. Identification of physical and chemical processes on ignition and burning of live fuels. PhD Thesis Oregon State University 2022.10.2139/ssrn.4057034 ↗
19. 10.1023/A:101164160107610.1023/A:1011641601076 ↗
20. Weise DR White RH Beall FC et al. Use of the cone calorimeter to detect seasonal differences in selected combustion characteristics of ornamental vegetation. Int J Wildland Fire 2005; 14: 321–338. https://doi.org/10.1071/WF0403510.1071/WF04035 ↗
21. Dietenberger MA, Boardman CA, Shotorban B, et al. Thermal degradation modeling of live vegetation for fire dynamic simulator. In: Proceedings, 2020 spring technical meeting, Central States section of the combustion institute, Huntsville, AL, 17–19 May 2020, pp. 1–20, CSSCI.
22. ASTM E2058-01. Standard test methods for measurement of synthetic polymer material flammability using a Fire Propagation Apparatus (FPA).
23. Thomas JC. Improving the understanding of fundamental mechanisms that influence ignition and burning behavior of porous Wildland fuel beds. PhD Thesis University of Edinburgh UK 2017.
24. ASTM E2067-03. Standard practice for full-scale oxygen consumption calorimetry fire tests.
25. Rothermel RC. A mathematical model for predicting fire spread in Wildlands fuels. USDA Forest Service, 1972.
26. 10.1016/j.firesaf.2012.04.00110.1016/j.firesaf.2012.04.001 ↗
27. Garg P Roche T Eden M et al. Effect of moisture content and fuel type on emissions from vegetation using a steady state combustion apparatus. Int J Wildland Fire 2021; 30: 10.1071/WF20118.https://doi.org/10.1071/WF2011810.1071/WF20118 ↗
28. Moghtaderi B, Fletcher DF. Flaming combustion characteristics of wood-based materials. Fire Saf Sci 1988; 3: 209–220.
29. Dietenberger MA, Boardman CR, Weise DR. New methods for pyrolysis and combustion properties of forest litter: enhanced cone calorimetry with longleaf pine needles. In: Proceedings 2020, the fire continuum-preparing for the future of Wildland fire, Missoula, MT, 21–24 May 2020, pp. 72–83. RMRS.
30. Wang E Wan H Simeoni A et al. Experimental study on effects of moisture content and tree height on crown fire behaviors of live cypress trees. Combust Sci Technol 2024; 197: 2727–2742. https://doi.org/10.1080/00102202.2024.232357610.1080/00102202.2024.2323576 ↗
31. Guillaume B, Ganteaume A, Majeri M, et al. New laboratory results on ignition and propagation in live vegetation paving the road to a semi-empirical model. Fire Mater 2025; 0: 1–12.
32. Ganteaume A. Personal communication. INRAE, 2025.
33. Bartoli P Simeoni A Biteau H et al. Determination of the main parameters influencing forest fuel combustion dynamics. Fire Saf J 2011; 46(1–2): 27–33. https://doi.org/10.1016/j.firesaf.2010.05.00210.1016/j.firesaf.2010.05.002 ↗
34. 10.1016/j.firesaf.2023.10387110.1016/j.firesaf.2023.103871 ↗
35. Hu Y Christensen EG Amin HMF et al. Experimental study of moisture content effects on the transient gas and particle emissions from peat fires. Combust Flame 2019; 209: 408–417. https://doi.org/10.1016/J.COMBUSTFLAME.2019.07.04610.1016/j.combustflame.2019.07.046 ↗
36. ISO 5660-1. Reaction-to-fire tests — Heat release smoke production and mass loss rate Part 1: heat release rate (cone calorimeter method) and smoke production rate (dynamic measurement).
37. ISO 19702:2024. Sampling and analysis of toxic gases and vapors in fire effluents using Fourier Transform Infrared (FTIR) spectroscopy.
38. ISO 21397. FTIR analysis of fire effluents in cone calorimeter tests.
39. AS 1530.8.2:2018. Methods for fire tests on building materials components and structures Part 8.2: tests on elements of construction for buildings exposed to simulated bushfire attack–Large flaming sources.
40. Babrauskas V. Ignition handbook. Fire Science Publishers, 2003.
41. 10.1016/j.ijheatmasstransfer.2014.11.03710.1016/j.ijheatmasstransfer.2014.11.037 ↗