Comparative analysis of fire protection performance and char structures of intumescent coatings in laboratory and industrial-scale furnace
Source abstract
Abstract
Variations in test conditions can significantly affect the performance of intumescent coatings. This study examines the impact of different furnace setups and atmospheric conditions on the fire resistance performance and char morphology of an epoxy-based intumescent coating. The results reveal notable differences in char morphology and thermal insulation properties across various setups. This work underscores the complexity of testing in large industrial furnaces, where significant differences were observed based on the steel shape and location. The chars produced in lab-scale furnaces resembled those in the outer flanges of H-columns tested in the industrial furnace, suggesting that similar thermal conditions were achieved. Samples tested under different atmospheric conditions showed differences in the pore size distribution, with smaller pores in the char exposed to inert conditions. This work highlights the sensitivity of intumescent coatings to testing conditions and emphasizes the need for developing test methods that can accurately simulate standardized heating curves.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Flame retardant materials and properties · Fire effects on concrete materials · Fire dynamics and safety research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Department of Chemical and Biochemical Engineering, CoaST, Technical University of Denmark (DTU), Lyngby, Denmark
Pinturas Hempel SAU, Fire Protection-Group R&D, Santa Perpetua de Mogoda, Spain
Funding
Hempel Fonden · HEMPEL A/S
References (58)
Show source-provided references
1. 10.62913/engj.v35i1.69110.62913/engj.v35i1.691 ↗
2. 10.1007/s10853-017-1500-010.1007/s10853-017-1500-0 ↗
3. 10.62913/engj.v50i4.105110.62913/engj.v50i4.1051 ↗
4. 10.1007/s11998-016-9815-310.1007/s11998-016-9815-3 ↗
5. 10.1177/073490411562672010.1177/0734904115626720 ↗
6. 10.1016/j.porgcoat.2019.06.02010.1016/j.porgcoat.2019.06.020 ↗
7. 10.1007/s10973-023-12758-110.1007/s10973-023-12758-1 ↗
8. 10.1080/02670844.2019.163653610.1080/02670844.2019.1636536 ↗
9. 10.1016/j.progpolymsci.2015.04.01010.1016/j.progpolymsci.2015.04.010 ↗
10. 10.1016/j.jcsr.2019.10571210.1016/j.jcsr.2019.105712 ↗
11. 10.1016/j.tca.2006.07.00810.1016/j.tca.2006.07.008 ↗
12. 10.1016/j.firesaf.2020.10326410.1016/j.firesaf.2020.103264 ↗
13. 10.1016/j.firesaf.2020.10295110.1016/j.firesaf.2020.102951 ↗
14. 10.3390/coatings908048310.3390/coatings9080483 ↗
15. 10.1016/j.compositesa.2017.05.01510.1016/j.compositesa.2017.05.015 ↗
16. Lucherini A. Experimental study of the behaviour of steel structures protected by different intumescent coatings and exposed to various fire scenarios. MSc Thesis, Danmarks Tekniske Universitet, Kongens Lyngby, 2017.
17. 10.1016/j.porgcoat.2013.10.01810.1016/j.porgcoat.2013.10.018 ↗
18. 10.1007/s10694-017-0649-z10.1007/s10694-017-0649-z ↗
19. 10.1002/fam.310210.1002/fam.3102 ↗
20. 10.1177/073490412090285210.1177/0734904120902852 ↗
21. 10.1021/ie060841010.1021/ie0608410 ↗
22. 10.6028/NIST.TN.171410.6028/NIST.TN.1714 ↗
23. 10.1002/fam.84910.1002/fam.849 ↗
24. British Standards Institute Staff. Eurocode 3: design of steel structures -Part 1-2: general rules-structural fire design. London: British Standards Institution, 2005.
25. 10.1177/073490411770947910.1177/0734904117709479 ↗
26. McNamee RJ, Storesund K, Stølen R. The function of intumescent paint for steel during different fire exposures. Brandforsk 2016; 43: 58.
27. 10.1016/j.firesaf.2016.01.01110.1016/j.firesaf.2016.01.011 ↗
28. 10.1002/fam.284010.1002/fam.2840 ↗
29. 10.1021/ie060040x10.1021/ie060040x ↗
30. 10.1016/j.conbuildmat.2017.12.10810.1016/j.conbuildmat.2017.12.108 ↗
31. 10.1016/j.firesaf.2016.05.00110.1016/j.firesaf.2016.05.001 ↗
32. 10.1016/S0379-7112(01)00035-210.1016/S0379-7112(01)00035-2 ↗
33. 10.3390/buildings1207101410.3390/buildings12071014 ↗
34. 10.1016/j.porgcoat.2013.05.02810.1016/j.porgcoat.2013.05.028 ↗
35. 10.3390/polym1104064010.3390/polym11040640 ↗
36. 10.1038/s41598-019-38515-910.1038/s41598-019-38515-9 ↗
37. 10.1021/acs.iecr.0c0625910.1021/acs.iecr.0c06259 ↗
38. 10.1016/j.firesaf.2025.10436710.1016/j.firesaf.2025.104367 ↗
39. 10.1016/j.firesaf.2025.10443610.1016/j.firesaf.2025.104436 ↗
40. European Committee for Standardization. EN 1363-2: fire resistance tests-part 2: alternative and additional procedures. Brussels: European Committee for Standardization, 1999.
41. Berg S Kutra D Kroeger T et al. Ilastik: interactive machine learning for (bio)image analysis. Nat Methods 2019; 16: 1226–1232.10.1038/s41592-019-0582-9 ↗
42. 10.1023/A:101093340432410.1023/A:1010933404324 ↗
43. 10.1002/fam.329710.1002/fam.3297 ↗
44. 10.21105/joss.0129610.21105/joss.01296 ↗
45. Castle G. Fire protection of structural steel. Loss Prev 1974; 8: 57–64.
46. European Committee for Standardization. EN 13381-8: test methods for determining the contribution to the fire resistance of structural members -Part 8: applied reactive protection to steel members. Brussels: European Committee for Standardization, 2013.
47. 10.1177/073490410504859810.1177/0734904105048598 ↗
48. 10.1007/s10694-022-01216-310.1007/s10694-022-01216-3 ↗
49. 10.1002/stab.20190009510.1002/stab.201900095 ↗
50. 10.1016/j.firesaf.2012.02.00410.1016/j.firesaf.2012.02.004 ↗
51. 10.1177/073490411245356610.1177/0734904112453566 ↗
52. 10.1007/s11998-021-00591-w10.1007/s11998-021-00591-w ↗
53. 10.3801/IAFSS.FSS.5-52310.3801/IAFSS.FSS.5-523 ↗
54. 10.1002/fam.242610.1002/fam.2426 ↗
55. 10.1177/073490411246729110.1177/0734904112467291 ↗
56. 10.1177/0021955X1668145510.1177/0021955X16681455 ↗
57. 10.1016/j.surfcoat.2006.01.02610.1016/j.surfcoat.2006.01.026 ↗
58. 10.1023/A:102227270741210.1023/A:1022272707412 ↗