Proton Conductivity and Methanol Permeability of Sulfonated Syndiotactic Polystyrene Membranes
Source abstract
Abstract
Proton conductivity of innovative ionomeric membranes based on partially sulfonated syndiotactic polystyrene (SsPS) was investigated. The membranes were prepared with various levels of sulfonation by chlorosulfonic reaction on sPS films, in its clathrate form, obtained by solution-casting. The actual sulfonation degree of sPS membranes was evaluated by elemental analysis and their proton conductivity was measured using a galvanostatic four-points-probe electrochemical impedance spectroscopy technique. The dependence of conductivity on the level of sulfonation, hydration condition, and temperature was studied. At higher sulfonation degrees, SsPS membranes showed the best performance in vapor phase at 100% RH. In particular, the best SsPS membrane with sulfonation degree about 26 mol% exhibited conductivity equal to 8.8 × 10−2 Ω−1 cm−1 at 31.5 °C. This property is stable during time and increases with temperature. For the membranes with the highest degree of sulfonation, we measured a methanol permeability very close to that of Nafion.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Fuel Cells and Related Materials · Advanced Battery Technologies Research · Membrane-based Ion Separation Techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (41)
Show source-provided references
1. Tant M.R. · 199710.1007/978-94-009-1461-2 ↗
2. Eisenberg A. · 1986
3. 10.1002/pol.1981.23016010210.1002/pol.1981.230160102 ↗
4. 10.1021/ma00005a01510.1021/ma00005a015 ↗
5. 10.1021/ma00195a04010.1021/ma00195a040 ↗
6. 10.1021/ma00246a01310.1021/ma00246a013 ↗
7. 10.1021/ma00071a02710.1021/ma00071a027 ↗
8. 10.1021/ma00095a01810.1021/ma00095a018 ↗
9. 10.1021/ma00079a04210.1021/ma00079a042 ↗
10. 10.1002/marc.1988.03009110810.1002/marc.1988.030091108 ↗
11. 10.1021/ma00207a05010.1021/ma00207a050 ↗
12. 10.1295/polymj.23.143510.1295/polymj.23.1435 ↗
13. 10.1016/0032-3861(92)90117-F10.1016/0032-3861(92)90117-F ↗
14. 10.1016/j.polymer.2005.07.06310.1016/j.polymer.2005.07.063 ↗
15. 10.1021/ma970061q10.1021/ma970061q ↗
16. 10.1021/cm071099c10.1021/cm071099c ↗
17. 10.1016/0032-3861(93)90318-510.1016/0032-3861(93)90318-5 ↗
18. 10.1016/0032-3861(93)90007-W10.1016/0032-3861(93)90007-W ↗
19. 10.1016/S0032-3861(97)10372-X10.1016/S0032-3861(97)10372-X ↗
20. 10.1016/j.eurpolymj.2010.02.01110.1016/j.eurpolymj.2010.02.011 ↗
21. Napolitano T. · 2008
22. Napolitano T. · 2005
23. 10.1021/cm900632r10.1021/cm900632r ↗
24. Benson S.D. · Polymer Preprints · 2009 · 50 · 182
25. 10.1063/1.162542910.1063/1.1625429 ↗
26. 10.1016/1381-5148(95)00093-310.1016/1381-5148(95)00093-3 ↗
27. 10.2116/analsci.17.111710.2116/analsci.17.1117 ↗
28. 10.1149/1.183822010.1149/1.1838220 ↗
29. 10.1149/1.183662510.1149/1.1836625 ↗
30. Crank, J. and Park, G.S. 1968.Diffusion in polymers, 176London, UK: Academic Press.
31. 10.1021/ma00145a03010.1021/ma00145a030 ↗
32. 10.1149/1.163915710.1149/1.1639157 ↗
33. 10.1016/j.memsci.2005.04.04710.1016/j.memsci.2005.04.047 ↗
34. 10.1149/1.185981410.1149/1.1859814 ↗
35. 10.1063/1.172379210.1063/1.1723792 ↗
36. 10.1063/1.174742410.1063/1.1747424 ↗
37. Flory, P.J. 1953.Principles of polymer chemistry, 576Ithaca, NY, USA: Cornell Univ. Press.
38. 10.1016/0013-4686(94)E0051-Z10.1016/0013-4686(94)E0051-Z ↗
39. 10.1149/1.139335110.1149/1.1393351 ↗
40. 10.1016/S0022-0728(98)00197-110.1016/S0022-0728(98)00197-1 ↗
41. 10.1016/S0378-7753(99)00407-310.1016/S0378-7753(99)00407-3 ↗