Effect of (Ca0.8Sr0.2)0.6La0.267TiO3 on Phase, Microstructure, and Microwave Dielectric Properties of Mg0.95Zn0.05TiO3 Synthesized by Polymeric Precursor Method
Source abstract
Abstract
A number of compounds in the (1 − x)Mg0.95Zn0.05TiO3-x(Ca0.8Sr0.2)0.6 La0.267TiO3 (x = 0 to 0.25) composition series have been obtained via a polymeric precursor route to investigate the effect of increasing (Ca0.8Sr0.2)0.6La0.267TiO3 proportion on the phase, microstructure, and microwave dielectric properties of the sintered ceramics. Composite powders having nanometric particles were obtained by calcining the precursors at 700°C. Refinement results revealed that these samples comprised a mixture of Mg0.95Zn0.05TiO3 and (Ca0.8Sr0.2)0.6La0.267TiO3 ceramics. A combination of optimum microwave dielectric properties, i.e., dielectric constant of 25.17, quality factor of 58,754 GHz, and temperature coefficient of resonant frequency of −5.8 ppm/°C, was achieved for the x = 0.2 composition sintered at 1200°C.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microwave Dielectric Ceramics Synthesis · Ferroelectric and Piezoelectric Materials · Dielectric properties of ceramics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (38)
Show source-provided references
1. F. Liu, X.-Y. Liu, C.-L. Yuan, J.-J. Qu, G.-H. Chen, C.-R. Zhou, and F. Liu, J. Eur. Ceram. Soc. 35, 2091 (2015).10.1016/j.jeurceramsoc.2015.01.007 ↗
2. X. Guo, B. Tang, J. Liu, H. Chen, and S. Zhang, J. Alloys Compd. 646, 512 (2015).10.1016/j.jallcom.2015.05.202 ↗
3. A. Ullah, Y. Iqbal, T. Mahmood, A. Mahmood, A. Naeem, and M. Hamayun, Ceram. Int. 41, 15089 (2015).10.1016/j.ceramint.2015.08.075 ↗
4. A. Naeem, A. Mahmood, Y. Iqbal, A. Ullah, T. Mahmood, and M. Humayun, J. Alloys Compd. 645, 290 (2015).10.1016/j.jallcom.2015.05.114 ↗
5. J. Qu, F. Liu, C. Yuan, X. Liu, and G. Chen, Mater. Sci. Eng. B 191, 15 (2015).10.1016/j.mseb.2014.10.005 ↗
6. H. Li, B. Tang, Y. Li, Z. Qing, and S. Zhang, Mater. Lett. 145, 30 (2015).10.1016/j.matlet.2015.01.070 ↗
7. K. Wakino, Ferroelectrics 91, 69 (1989).10.1080/00150198908015730 ↗
8. C.-L. Huang, Y.-B. Chen, and C.-F. Tasi, J. Alloys Compd. 460, 675 (2008).10.1016/j.jallcom.2007.06.062 ↗
9. L. Li, J. Ye, S. Zhang, Z. Gao, and S. Li, J. Alloys Compd. 648, 184 (2015).10.1016/j.jallcom.2015.06.210 ↗
10. R. Kell, A. Greenham, and G. Olds, J. Am. Ceram. Soc. 56, 352 (1973).10.1111/j.1151-2916.1973.tb12684.x ↗
11. I.-S. Kim, W.-H. Jung, Y. Inaguma, T. Nakamura, and M. Itoh, Mater. Res. Bull. 30, 307 (1995).10.1016/0025-5408(94)00142-1 ↗
12. P. Wise, I. Reaney, W. Lee, T. Price, D. Iddles, and D. Cannell, J. Eur. Ceram. Soc. 21, 1723 (2001).10.1016/S0955-2219(01)00102-9 ↗
13. A. Naeem, A. Ullah, Y. Iqbal, T. Mahmood, and A. Mahmood, J. Alloys Compd. 672, 298 (2016).10.1016/j.jallcom.2016.02.148 ↗
14. W.K. Leutwyler, S.L. Bürgi, and H. Burgl, Science 271, 933 (1996).10.1126/science.271.5251.933 ↗
15. A.L. Rogach, D.V. Talapin, E.V. Shevchenko, A. Kornowski, M. Haase, and H. Weller, Adv. Funct. Mater. 12, 653 (2002).10.1002/1616-3028(20021016)12:10<653::AID-ADFM653>3.0.CO;2-V ↗
16. H. Wu, Z. Feng, Q. Mei, J. Guo, F. Hou, P. Li, and X. Jiang, Ceram. Int. 41, 7645 (2015).10.1016/j.ceramint.2015.02.092 ↗
17. Y. Liu, Y. Pu, Z. Sun, and Q. Jin, Mater. Res. Bull. 70, 195 (2015).10.1016/j.materresbull.2015.03.054 ↗
18. T. Nishikawa, K. Wakino, H. Tamura, H. Tanaka, and Y. Ishikawa, 1987 IEEE MTT-S International Microwave Symposium Digest (1987), p. 277.10.1109/MWSYM.1987.1132383 ↗
19. C. Mao, X. Dong, and T. Zeng, Mater. Lett. 61, 1633 (2007).10.1016/j.matlet.2006.07.089 ↗
20. A. Ullah, A. Naeem, Y. Iqbal, T. Mahmood, and A. Mahmood, J. Mater. Sci. 27, 3506 (2016).
21. L. Lutterotti and C. Maud, Newsletter, (IUCr) No. 24 (December 2000).
22. M. Zhang, L. Li, W. Xia, and Q. Liao, J. Alloys Compd. 537, 76 (2012).10.1016/j.jallcom.2012.05.026 ↗
23. H. Kay and P. Bailey, Acta Crystallogr. 10, 219 (1957).10.1107/S0365110X57000675 ↗
24. R.D. Shannon, Acta Crystallogr. Sect. A 32, 751 (1976).10.1107/S0567739476001551 ↗
25. C.-H. Wang, X.-P. Jing, W. Feng, and J. Lu, J. Appl. Phys. 104, 034112 (2008).10.1063/1.2966717 ↗
26. P. McMillan and N. Ross, Phys. Chem. Miner. 16, 21 (1988).10.1007/BF00201326 ↗
27. T. Hirata, K. Ishioka, and M. Kitajima, J. Solid State Chem. 124, 353 (1996).10.1006/jssc.1996.0249 ↗
28. S. Keshri and S.S. Rajput, Ceram. Int. 40, 4257 (2014).10.1016/j.ceramint.2013.08.090 ↗
29. U. Balachandran and N. Eror, Solid State Commun. 44, 815 (1982).10.1016/0038-1098(82)90280-0 ↗
30. H. Rocha, F.N.A. Freire, M.R.P. Santos, J.M. Sasaki, T. Cordaro, and A.S.B. Sombra, Phys. B 403, 2902 (2008).10.1016/j.physb.2008.02.033 ↗
31. P. Sarah and S. Suryanarayana, Bull. Mater. Sci. 26, 745 (2003).10.1007/BF02706773 ↗
32. D. Barrow, T. Petroff, R. Tandon, and M. Sayer, J. Appl. Phys. 81, 876 (1997).10.1063/1.364172 ↗
33. Z. Hashin and S. Shtrikman, J. Appl. Phys. 33, 3125 (1962).10.1063/1.1728579 ↗
34. S.H. Yoon, G.-K. Choi, D.-W. Kim, S.-Y. Cho, and K.S. Hong, J. Eur. Ceram. Soc. 27, 3087 (2007).10.1016/j.jeurceramsoc.2006.11.035 ↗
35. D.A. Sagala and S. Nambu, J. Am. Ceram. Soc. 75, 2573 (1992).10.1111/j.1151-2916.1992.tb05613.x ↗
36. B. Silverman, Phys. Rev. 125, 1921 (1962).10.1103/PhysRev.125.1921 ↗
37. A. Paladino, J. Am. Ceram. Soc. 54, 168 (1971).10.1111/j.1151-2916.1971.tb12247.x ↗
38. H.-J. Hagemann, J. Phys. C 11, 3333 (1978).10.1088/0022-3719/11/15/031 ↗