journal article·2009-05

Lead-Free Bumping Using an Alternating Electromagnetic Field

Hongbo Xu, Mingyu Li, Hongtao Chen, Yonggao Fu, Ling Wang

Journal of Electronic Materials· Volume 38· Issue 5
Publisher page

Abstract

A novel lead-free bumping technique using an alternating electromagnetic field (AEF) was investigated. Lead-free solder bumps reflowed onto copper pads through AEF have been achieved. A comparison was conducted between the microstructures of the lead-free solder joints formed by the conventional thermal reflow and AEF reflow. Keeping the substrate temperature lower than that of the solder bumps, AEF reflow successfully created metallurgical bonding between the lead-free solders and metallizations through an interfacial intermetallic compound (IMC). The AEF reflow could be finished in several seconds, much faster than the conventional hot-air reflow. Considering the morphology of the interfacial Cu6Sn5 IMC, a shorter heating time above the melting point would be a better choice for solder joint reliability. The results show that AEF reflow is a promising localized heating soldering technique in electronic packaging.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Electronic Packaging and Soldering Technologies · 3D IC and TSV technologies · Intermetallics and Advanced Alloy Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (20)

Show source-provided references
1. R. Vanzetti and A.S. Dostoomian, US Patents, no. 4,696,104 (1987).
2. Y. H. Tian, C.Q. Wang, X. S. Ge, P. Liu, and D.M. Liu, Mater. Sci. and Eng. B 95, 254 (2002).doi: 10.1016/S0921-5107(02)00270-210.1016/S0921-5107(02)00270-2 ↗
3. Y. H. Tian, C.Q. Wang, and D.M. Liu, Model. Simul. Mater. Sci. Eng. 12, 235 (2004).doi: 10.1088/0965-0393/12/2/00510.1088/0965-0393/12/2/005 ↗
4. D.J. Hayes, D.B. Wallace, and M.T. Boldman, Proc. ISHM (1992), p. 316.
5. T. Oppert, L. Titerle, E. Zakel, G. Azdasht, and T. Teutsch, Proceedings of International Symposium on Microelectronics (2002), p. 145.
6. H. Yang, M. Wu, and W. Fang, J. Micromech. Microeng. 15, 394 (2005). doi: 10.1088/0960-1317/15/2/02010.1088/0960-1317/15/2/020 ↗
7. M. Li, H. Xu, J. Kim, and H. Kim, J. Mater. Sci. Technol. 23, 61 (2007).
8. M. Li, H. Xu, S.W. R. Lee, J. Kim, and D. Kim, IEEE Trans. Adv. Packaging 31, 399 (2008).doi: 10.1109/TADVP.2008.92338510.1109/TADVP.2008.923385 ↗
9. M. Abtew, and G. Selvaduray, Mater. Sci. Eng. 27, 95 (2000).doi: 10.1016/S0927-796X(00)00010-310.1016/S0927-796X(00)00010-3 ↗
10. S. W. Chen, C. H. Wang, S. K. Lin, and C. N. Chiu, J. Mater. Sci.: Mater. Electron. 18, 19 (2007).doi: 10.1007/s10854-006-9010-x
11. J. Glazer, J. Electron. Mater. 23, 693 (1994).doi: 10.1007/BF0265136110.1007/BF02651361 ↗
12. F. Bartels and J.W. Morris, Jr., J. Electron. Mater. 23, 787 (1994).doi: 10.1007/BF0265137410.1007/BF02651374 ↗
13. J. O. Suh, K. N. Tu, G. V. Lutsenko, and A. M. Gusak, Acta Mater. 56, 1075 (2008).doi: 10.1016/j.actamat.2007.11.00910.1016/j.actamat.2007.11.009 ↗
14. H.K. Kim and K.N. Tu, Phys. Rev. B 53, 16027 (1996).doi: 10.1103/PhysRevB.53.1602710.1103/PhysRevB.53.16027 ↗
15. K. Moon, Y. Li, J.doiu, and C.P. Wong, J. Electron. Mater. 34, 1081(2005).doi: 10.1007/s11664-005-0099-010.1007/s11664-005-0099-0 ↗
16. S. Chen, C. Wang, S. Lin, C. Chiu, and C. Chen, JOM 59, 39 (2007).doi: 10.1007/s11837-007-0008-510.1007/s11837-007-0008-5 ↗
17. J. W. Jang, D. R. Frear, T. Y. Lee, K. N. Tu, J. Appl. Phys. 88, 6359 (2000)doi: 10.1063/1.132178710.1063/1.1321787 ↗
18. G.Y. Li and B.L. Chen, IEEE Trans. Comp. Packaging Technol. 26, 651 (2003).doi: 10.1109/TCAPT.2003.81786010.1109/TCAPT.2003.817860 ↗
19. W. J. Boettinger, U. R. Kattner, K. W. Moon, J. H. Perepezko (2006) DTA and Heat-Flux DSC Measurements of Alloy Melting and Freezing. Washington:NIST
20. W. Yang, R. W. Messler, Jr., L. E. Felton, J. Electron. Mater. 23, 765 (1994). : 10.1007/BF0265137110.1007/BF02651371 ↗