journal article·2007-05-30

The Feasibility of Au Ball Bonding on Sn-Plated Cu

J. Lee, M. Mayer, Y. Zhou

Journal of Electronic Materials· Volume 36· Issue 6
Publisher page

Abstract

The feasibility of thermosonic gold wire bonding on Cu coupons with Sn/Cu metallizations was studied by evaluating shear strength and microstructure of balls bonded on different Sn metallization samples. The 0.85 ± 0.08 μm and 5.34 ± 0.21 μm thick metallizations were produced by dipping the Cu coupon in 250°C molten Sn solder for 1 s (sample 1) and 30 s (sample 2), respectively. Cu6Sn5 intermetallic compounds are formed during dipping. After wire bonding, Au-Cu-Sn layers are found on the ball-coupon interface of both samples. The highest ball shear force observed was 40 gf (1 gf = 9.81 mN) and was achieved on sample 1 using 520 mW and 40 gf of ultrasonic power and bonding force, respectively. The shear fracture goes through the Au ball. The Sn is squeezed out of the contact zone during wire bonding and forms flashes that extend 5 μm and 25 μm beyond the contact zone for samples 1 and 2, respectively.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Electronic Packaging and Soldering Technologies · 3D IC and TSV technologies · Advanced Welding Techniques Analysis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (19)

Show source-provided references
1. G. Harman, Wire Bonding in Microelectronics: Materials, Processes, Reliability, and Yield, 2nd ed. (New York: McGraw-Hill, 1997)
2. M. Miyamoto, T. Takeda, T. Furusawa, IEEE Trans. Electron. Dev. 44, 250 (1997)10.1109/16.557712 ↗
3. J.N. Aoh, C.L. Chuang, J. Electron. Mater. 33, 290 (2004)10.1007/s11664-004-0135-5 ↗
4. M. Sivakumar, V. Kripesh, C.S. Choong, C.T. Chon, L.A. Lim, Microelectron. Reliab. 42, 1535 (2002)10.1016/S0026-2714(02)00185-3 ↗
5. G. Harman, C.E. Johnson, IEEE Trans. Comp. Packag. Technol. 25, 677 (2002)10.1109/TCAPT.2002.808008 ↗
6. U. Ray, I. Artaki, H.M. Gordon, J. Electron. Mater. 23, 779 (1994)10.1007/BF02651373 ↗
7. H. Okamoto, T.B. Massalski, Binary Alloy Phase Diagrams, 2nd ed. (Materials Park, OH: ASM International, 1990)
8. N. Saunders, A.P. Miodownik, Binary Alloy Phase Diagrams, 2nd ed. (Materials Park, OH: ASM International, 1990)
9. R.A. Gagliano, M.E. Fine, J. Electron. Mater. 32, 1441 (2003)10.1007/s11664-003-0113-3 ↗
10. Y.C. Chan, A.C.K. So, J.K.L. Lai, Mater. Sci. Eng. B55, 5 (1998)10.1016/S0921-5107(98)00202-5 ↗
11. A. Hayashi, C.R. Kao, Y.A. Chang, Scripta Mater., 37, 393 (1997)10.1016/S1359-6462(97)00129-2 ↗
12. K.L. Erickson, P.L. Hopkins, P.T. Vianco, J. Electron. Mater. 23, 729 (1994)10.1007/BF02651366 ↗
13. H. Okamoto, K.J. Chakrabarti, D.E. Laughlin, T.B. Massalski, Binary Alloy Phase Diagrams, 2nd ed. (Materials Park, OH: ASM International, 1990)
14. B.D. Cullity, Elements of X-Ray Diffraction, 2nd ed. (CA: Addison-Wesley, 1978)
15. M. Mayer and J. Schiwizer, Proc. 5th Electronic Packaging Technology Conf. (Singapore: IEEE/EPTC, 2003), pp. 738–743
16. J.E. Krazanowski, N. Murdeshwar, J. Electron. Mater. 19, 919 (1990)10.1007/BF02652917 ↗
17. G. Harman, J. Alberts, IEEE Trans. Parts, Hybrids Packag. PHP-13, 406 (1977)10.1109/TPHP.1977.1135225 ↗
18. A. Schneuwly, P. Groning, L. Schlapbach, G. Muller, J. Electron. Mater. 27, 1254 (1998)10.1007/s11664-998-0079-2 ↗
19. K.C. Joshi, Weld. J. 50, 840 (1971)