Chip to Chip Bonding Using Cu Bumps Capped with Thin Sn Layers and the Effect of Microstructure on the Shear Strength of Joints
Source abstract
Abstract
Chip to chip bonding techniques using Cu bumps capped with thin solder layers have been frequently applied to 3D chip stacking technology. We studied the effect of joint microstructure on shear strength. Joints were formed by joining Sn/Cu bumps on a Si die and Sn/Cu layers on another Si die at 245–330°C using a thermo-compression bonder. Three different types of microstructures were fabricated in the joints by controlling the bonding temperature and time, (1) a Sn-rich phase with a Cu6Sn5 phase at the Cu interfaces, (2) a Cu6Sn5 phase in the interior with a Cu3Sn phase at the Cu interfaces, and (3) one single Cu3Sn phase throughout the whole joint. The joint having a single Cu3Sn phase had the highest shear strength. Specimens were aged up to 2000 h at 150°C and 180°C. During aging, the microstructures of all joints were transformed in a single Cu3Sn phase. The shear strength of the joints was very sensitive to the formation of Cu3Sn and microvoids. Microvoids formed in the solder joints with a Cu6Sn5 phase with and without a Sn-rich phase during aging and decreased the shear strength of the joints. Conversely, aging did not induce the formation of microvoids in the joints which originally had only a Cu3Sn phase and the shear strength was not decreased.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Electronic Packaging and Soldering Technologies · 3D IC and TSV technologies · Additive Manufacturing and 3D Printing Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (19)
Show source-provided references
1. S.F. Al-Sarawi, D. Abbott, and P.D. Franzon, IEEE Trans. Compon. Packag. Manuf. Technol. B 21, 2–14 (1998).10.1109/96.659500 ↗
2. J.H. Lau, Microelectron. Int. 28, 8–22 (2011).
3. K. Tanida, M. Umemoto, N. Tanaka, Y. Tomita, and K. Takahashi, Jpn. J. Appl. Phys. 43, 2264–2270 (2004).10.1143/JJAP.43.2264 ↗
4. K. Sakuma, P.S. Andry, C.K. Tsang, S.L. Wright, B. Dang, C.S. Patel, B.C. Webb, J. Maria, E.J. Sprogis, S.K. Kang, R.J. Polastre, R.R. Horton, and J.U. Knickerbocker, IBM J. Res. Dev. 52, 611–622 (2008).10.1147/JRD.2008.5388567 ↗
5. J.D. Reed, M. Lueck, C. Gregory, A. Huffman, J.M. Lannon Jr., and D. Temple, Proceedings of 60th Electronic Components and Technology Conference (Las Vegas, NV, 2010), pp. 846–852.10.1109/ECTC.2010.5490704 ↗
6. K. Takahashi, M. Umemoto, N. Tanaka, K. Tanida, Y. Nemoto, Y. Tomita, M. Tago, and M. Bonkohara, Microelectron. Reliab. 43, 1267–1279 (2003).10.1016/S0026-2714(03)00167-7 ↗
7. K. Sakuma, P.S. Andry, B. Dang, J. Maria, C.K. Tsang, C. Patel, S.L. Wright, B. Webb, E. Sprogis, S.K. Kang, R. Polastre, R. Horton, and J.U. Knickerbocker, Proceedings of 57th Electronic Components and Technology Conference (Sparks, NV, 2007), pp. 627–632.10.1109/ECTC.2007.373862 ↗
8. D.M. Jang, C. Ryu, K.Y. Lee, B.H. Cho, J. Kim, T.S. Oh, W.J. Lee, and J. Yu, Proceedings of 57th Electronic Components and Technology Conference (Sparks, NV, 2007), pp. 847–852.10.1109/ECTC.2007.373897 ↗
9. J.S. Lee, K.Y. Byun, Q.H. Chung, M.S. Suh, S.C. Kim, and Y.-H. Kim, Proceedings of European Microelectronics and Packaging Conference (Rimini, 2009).
10. J.S. Lee, Y.M. Kim, S.W. Ma, K.Y. Byun, Q.H. Chung, M.S. Suh, S.C. Kim, and Y.-H. Kim, Proceedings of International Conference of Electronic Materials and Packaging (Penang, Malaysia, 2009), pp. 1–3.
11. H. Huebner, S. Penka, B. Barchmann, M. Eigner, W. Gruber, M. Nobis, S. Janka, G. Kristen, and M. Schneegans, Microelectron. Eng. 83, 2155–2162 (2006).10.1016/j.mee.2006.09.026 ↗
12. K. Tanida, M. Umemoto, Y. Tomita, M. Tago, Y. Nemoto, T. Ando, and K. Takahashi, Proceedings of 53rd Electronic Components and Technology Conference (New Orleans, LA, 2003), pp. 1084–1089.
13. Y. Tomita, T. Morifuji, M. Tomisaka, M. Sunohara, Y. Nemoto, T. Sato, K. Takahashi, and M. Bonkohara, J.␣Chem. Eng. Jpn. 36, 119–125 (2003).10.1252/jcej.36.119 ↗
14. S.H. Lee, H.R. Roh, Z.G. Chen, and Y.-H. Kim, J. Electron. Mater. 34, 1446–1454 (2005).10.1007/s11664-005-0204-4 ↗
15. H.T. Lee and M.H. Chen, Mater. Sci. Eng. A 333, 24–34 (2002).10.1016/S0921-5093(01)01820-2 ↗
16. K.N. Tu and R.D. Thompson, Acta Metall. 30, 947–952 (1982).10.1016/0001-6160(82)90201-2 ↗
17. Y. Tomita, M. Tago, Y. Nemoto, and K. Takahashi, Proceedings of Electronics Packaging Technology Conference, 2000. (EPTC 2000). Proceedings of 3rd (2000), pp. 286– 291.
18. G.Y. Jang, J.W. Lee, and J.G. Duh, J. Electron. Mater. 33, 1103–1110 (2004).10.1007/s11664-004-0111-0 ↗
19. X. Deng, N. Chawla, K.K. Chawla, and M. Koopman, Acta Mater. 52, 4291–4303 (2004).10.1016/j.actamat.2004.05.046 ↗