journal article·2010-09

RETRACTED ARTICLE: Single-Phase β-Zn4Sb3 Prepared by a Mechanical Grinding Method

Chinatsu Okamura, Takashi Ueda, Kazuhiro Hasezaki

Journal of Electronic Materials· Volume 39· Issue 9
This record is marked as retracted by the source. Review the publisher’s notice before using its findings.
Publisher page

Abstract

Single-phase β-Zn4Sb3 materials were prepared by mechanical grinding (MG). Source materials for the Zn4Sb3 ingots were prepared using three different processes after the direct melting of constituent elements. In process 1, the ingot was obtained by quenching the melt in water within an evacuated quartz ampoule. In process 2, the ingot was heat-treated for 100 h at 723 K after process 1. In process 3, the ingot was heat-treated for a total of 200 h in two stages at 723 K and 673 K after process 1. The resultant ingots were mechanically ground and sintered at 623 K by hot pressing. The sintered materials were characterized by x-ray diffraction, differential thermal analysis (DTA), and thermoelectric property measurements. The thermal conductivity of the sintered materials was 0.88 W m−1 K−1 at room temperature, being slightly lower than that reported for the materials prepared by a conventional method. Results indicate that the dimensionless figure of merit of the single-phase β-Zn4Sb3 ranged from 1.06 to 1.31 at 573 K.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced Thermoelectric Materials and Devices · Thermal properties of materials · Semiconductor materials and interfaces

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (16)

Show source-provided references
1. T. Caillat, J.-P. Fleurial, and A. Borshchevsky, J. Phys. Chem. Solides 58, 1119 (1997).10.1016/S0022-3697(96)00228-4 ↗
2. T.J. Zhu, X.B. Zhao, M. Yan, S.H. Hu, T. Li, and B.C. Chou, Mater. Lett. 46, 44 (2000).10.1016/S0167-577X(00)00140-3 ↗
3. M. Tapiero, S. Tarabichi, J.G. Gies, C. Noguet, J.P. Zielinger, M. Joucla, J.L. Loison, and M. Robino, Solar Energy Mater. 12, 257 (1985).10.1016/0165-1633(85)90051-6 ↗
4. H.W. Mayer, I. Mikhail, and K. Schubert, J. Less-Common Metals 59, 43 (1978).10.1016/0022-5088(78)90109-1 ↗
5. B.L. Pedersen, H. Birkedal, E. Nishibori, A. Bentien, M. Sakata, M. Nygren, P.T. Frederiksen, and B.B. Iversen, Chem. Mater. 19, 6304 (2007).10.1021/cm702247b ↗
6. B.L. Pedersen and B.B. Iversen, Appl. Phys. Lett. 89, 24218 (2006).10.1063/1.2404612 ↗
7. B.L. Pedersen, H. Birkedal, B.B. Iversen, M. Nygren, and P.T. Frederiksen, Appl. Phys. Lett. 92, 161913 (2008).10.1063/1.2916705 ↗
8. G. Nakamoto, N. Akai, M. Kurisu, I.-H. Kim, S.-C. Ur, and V.L. Kuznetsov, J. Alloys Compd. 432, 116 (2007).10.1016/j.jallcom.2006.05.118 ↗
9. T. Souma, G. Nakamoto, and M. Kurisu, J. Alloys Compd. 340, 275 (2002).10.1016/S0925-8388(02)00113-5 ↗
10. T. Ueda, C. Okamura, and K. Hasezaki, Mater. Trans. 49, 1894 (2008).
11. S.-C. Ur, P. Nash, and I.-H. Kim, J. Mater. Sci. 38, 3553 (2003).10.1023/A:1025608926808 ↗
12. V. Izard, M.C. Record, and J.C. Tedenac, J. Alloys Compd. 345, 257 (2002).10.1016/S0925-8388(02)00398-5 ↗
13. T. Itoh, J. Shan, and K. Kitagawa, J. Propul. Power 24, 353 (2008).10.2514/1.20944 ↗
14. T. Itoh and M. Yamada, J. Electron. Mater. 38, 925 (2009).
15. T. Hamachiyo, M. Ashida, and K. Hasezaki, Mater. Trans. 50, 167 (2009).10.2320/matertrans.MRA2008241 ↗
16. N.A. Ignatév, Y.A. Ugai, K.B. Aleinikova, and N.S. Rabotkina, J. Struct. Chem. 12, 665 (1971).10.1007/BF00743691 ↗