journal article·2012-11

Effect of Hold Time on Crack Growth Behavior of Pb-Containing and Pb-Free Solders

Kittichai Fakpan, Yuichi Otsuka, Yoshiharu Mutoh, Kohsoku Nagata

Journal of Electronic Materials· Volume 41· Issue 11
Publisher page

Abstract

Four types of loading waveforms were adopted to investigate the effect of hold time on crack growth behavior of Sn-37Pb and Sn-3.0Ag-0.5Cu solders: a sinusoidal waveform, triangular waveform, and trapezoidal waveform with hold times of 1 s, 5 s, and 10 s, and a triangular waveform with hold time of 10 s at maximum tensile load. The experimental results showed that the crack growth behavior of both solders tested under sinusoidal and triangular waveforms without any hold time was predominantly cycle dependent. On the other hand, the crack growth behavior of both solders tested under trapezoidal waveforms with hold times of 1 s, 5 s, and 10 s and triangular waveforms with hold time of 10 s was predominantly time dependent. Under cycle-dependent conditions the crack growth data were a function of J-integral range, while under time-dependent conditions the crack growth data were not a function of the creep J-integral range but rather of the C* parameter.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Electronic Packaging and Soldering Technologies · 3D IC and TSV technologies · Advanced Welding Techniques Analysis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (32)

Show source-provided references
1. M. Nozaki, M. Sakane, Y. Tsukada, and H. Nishimura, J. Eng. Mater. Technol. 128, 142 (2006).10.1115/1.2172273 ↗
2. G. Henaff, G. Odemer, G. Benoit, E. Koffi, and B. Journet, Int. J. Fatigue 31, 1943 (2009).10.1016/j.ijfatigue.2009.02.017 ↗
3. N. Merah, T. Bui-Quoc, and M. Bernard, Eng. Fract. Mech. 63, 39 (1999).10.1016/S0013-7944(99)00004-1 ↗
4. G. Onofrio, G.A. Osinkolu, and M. Marchionni, Int. J. Fatigue 23, 887 (2001).10.1016/S0142-1123(01)00053-6 ↗
5. Y.L. Lu, L.J. Chen, P.K. Liaw, G.Y. Wang, C.R. Brooks, S.A. Thompson, J.W. Blust, P.F. Browning, A.K. Bhattacharya, J.M. Aurrecoechea, and D.L. Klarstrom, Mater. Sci. Eng. A A429, 1 (2006).10.1016/j.msea.2005.07.039 ↗
6. Y.L. Lu, P.K. Liaw, Y. Sun, G.Y. Wang, S.A. Thompson, J.W. Blust, P.F. Browning, A.K. Bhattacharya, J.M. Aurrecoechea, and D.L. Klarstrom, Acta Mater. 55, 767 (2007).10.1016/j.actamat.2006.06.044 ↗
7. C. Kanchanomai and Y. Mutoh, Fatigue Fract. Eng. Mater. Struct. 30, 443 (2006).10.1111/j.1460-2695.2006.01088.x ↗
8. C.K. Lin and C.M. Huang, J. Electron. Mater. 35, 292 (2006).10.1007/BF02692449 ↗
9. H.D. Solomon, The Mechanics of Solder Alloy Interconnects, ed. D.R. Fear, S.N. Burchett, H.S. Morgen, and J.H. Lau (New York: Van Nostrand Reinhold, 1994), p. 199.
10. D.J. Xie, Y.C. Chan, J.K.L. Lai, and I.K. Hui, IEEE Trans. Compon. Packag. Manuf. Technol. B 19, 669 (1996).10.1109/96.533910 ↗
11. H. Nose, M. Sakane, M. Yamashita, and K. Shiokawa, Trans. Jpn. Soc. Mech. Eng. A69, 1222 (2003).10.1299/kikaia.69.1222 ↗
12. C. Kanchanomai and Y. Mutoh, Int. J. Mech. Mater. Eng. 2, 1318 (2008).10.1299/jmmp.2.1318 ↗
13. K. Tanaka, Eng. Fract. Mech. 77, 1750 (2010).10.1016/j.engfracmech.2010.01.010 ↗
14. J. Zhao, Y. Mutoh, Y. Miyashita, and L. Wang, Eng. Fract. Mech. 70, 2187 (2003).10.1016/S0013-7944(02)00252-7 ↗
15. K. Fakpan, Y. Otsuka, Y. Mutoh, S. Inoue, K. Nagata, and K. Kodani, J. Electron. Mater. (2012). doi: 10.1007/s11664-012-2061-2 .
16. N. Hidaka, H. Watanabe, and M. Yoshiba, J. Electron. Mater. 38, 670 (2009).10.1007/s11664-009-0689-3 ↗
17. JSMS Committee on High Temperature Strength of Materials, Low Cycle Fatigue Standard for Solder Testing (Japan: The Society of Materials Science, 2000).
18. N.E. Dowling, Crack and Fracture, ASTM STP601 (1976), p. 19.
19. T. Yafuso, M. Itokazu, T.A.P. Kacou, S. Kubo, and K. Ohji, JSME Int J. Ser. A 38, 97 (1995).
20. S. Taira, R. Ohtani, T. Kitamura, and K. Yamada, J. Soc. Mater. Sci. Jpn. 28, 414 (1979).10.2472/jsms.28.414 ↗
21. K. Ohji, K. Ogura, and S. Kubo, J. Soc. Mater. Sci. Jpn. 29, 465 (1980).10.2472/jsms.29.465 ↗
22. M. Yoda, M. Nabetani, and H. Okabe, Eng. Fract. Mech. 70, 2235 (2003).10.1016/S0013-7944(02)00233-3 ↗
23. J.J. Sundelin, S.T. Nurmi, and T.K. Lepistö, Mater. Sci. Eng. A 474, 201 (2008).10.1016/j.msea.2007.04.013 ↗
24. T.-M.K. Korhonen, L.P. Lehman, M.A. Korhonen, and D.W. Henderson, J. Electron. Mater. 36, 173 (2007).10.1007/s11664-006-0048-6 ↗
25. Y. Ding, C. Wang, and M. Li, J. Electron. Mater. 34, 1324 (2005).10.1007/s11664-005-0258-3 ↗
26. H. Ma and J.C. Suhling, J. Mater. Sci. 44, 114 (2009).10.1007/s10853-008-3098-8 ↗
27. C. Kanchanomai, S. Yamamoto, Y. Miyashita, Y. Mutoh, and A.J. McEvily, Int. J. Fatigue 24, 57 (2002).10.1016/S0142-1123(01)00052-4 ↗
28. Y. Kariya and T. Suga, Fatigue Fract. Eng. Mater. Struct. 30, 413 (2007).10.1111/j.1460-2695.2006.01091.x ↗
29. C.K. Lin and D.Y. Chu, J. Mater. Sci. Mater. Electron. 16, 355 (2005).10.1007/s10854-005-1147-5 ↗
30. J. Villain, O.S. Brueller, and T. Qasim, Sens. Actuators A99, 194 (2002).10.1016/S0924-4247(01)00882-2 ↗
31. Y. Qi, R. Lam, H.R. Ghorbani, P. Snugovsky, and J.K. Spelt, Microelectron. Reliab. 46, 574 (2006).10.1016/j.microrel.2005.01.008 ↗
32. S.Y. Yang, I. Kim, and S.-B. Lee, IEEE Trans. Compon. Packag. Manuf. Technol. 31, 3 (2008).10.1109/TCAPT.2007.906294 ↗