journal article·2008-09

Anisotropic Surface Roughness in Molecular-Beam Epitaxy CdTe (211)B/Ge(211)

Giacomo Badano, Xavier Baudry, Philippe Ballet, Philippe Duvaut, Alain Million, Eric Micoud, Sabeur Kaismoune, Paul Fougères, Sophie Mibord, Pierre Tran-Van, Arnaud Etcheberry

Journal of Electronic Materials· Volume 37· Issue 9
Publisher page

Abstract

We characterize the surface of molecular-beam epitaxy (MBE)-grown CdTe(211)B/Ge(211) by atomic-force microscopy (AFM), optical interference microscopy, and generalized ellipsometry (GE). We find that, for substrate temperatures above 300°C, the surface is rough and hazy; the AFM root-mean-square roughness is of the order of 150 A. It appears from GE that the optical response is anisotropic, the principal axes of anisotropy being along the \( [\overline{1} 11] \) and \( [0\overline{1} 1] \) directions. For a substrate temperature of approximately 300°C, the surface is smooth and mirror-like and the AFM roughness is as low as 45 A. The sample is still anisotropic, even though the magnitude of the cross-polarized reflection coefficients are very small in this case. It appears that the anisotropy originates from the surface roughness, not the bulk.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Semiconductor Quantum Structures and Devices · Advanced Semiconductor Detectors and Materials · Quantum Dots Synthesis And Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (24)

Show source-provided references
1. M. Vilela, D.D. Lofgreen, E.P.G. Smith, M.D. Newton, G.M. Venzor, J.M. Peterson, J.J. Franklin, M. Reddy, S.M. Johnson, and M.Z. Tirdow (to be published).
2. M. Carmody, J.G. Pasko, D. Edwall, R. Bailey, J. Arias, S. Cabelli, J. Bajaj, L.A. Almeida, J.H. Dinan, M. Groenert, A.J. Stoltz, Y. Chen, G. Brill and N.K. Dhar, J. Electron. Mater. 34, 832 (2005)10.1007/s11664-005-0028-2 ↗
3. S.M. Johnson, A.A. Buell, M.F. Vilela, J.M. Peterson, J.B. Varesi, M.D. Newton, G.M. Venzor, R.E. Bornfreund, W.A. Radford, E.P.G. Smith, J.P. Rosbeck, T.J. De Lyon, J.E. Jensen and V. Nathan, J. Electron. Mater. 33, 526 (2004)10.1007/s11664-004-0041-x ↗
4. J. Tersoff and F.K. LeGoues, Phys. Rev. Lett. 72, 3570 (1994)10.1103/PhysRevLett.72.3570 ↗
5. J.P. Zanatta, P. Ferret, P. Duvaut, S. Isselin, G. Theret, G. Rolland and A. Million, J. Cryst. Growth 184–185, 1297 (1998)10.1016/S0022-0248(98)80269-8 ↗
6. J.P. Zanatta, J.P. Ferret, G. Theret, A. Million, M. Wolny, J.P. Chamonal, and G. Destefanis, J. Electron. Mater. 27, 542–545 (1998)10.1007/s11664-998-0012-8 ↗
7. H.G. Tompkins, E. Irene (eds) Handbook of Ellipsometry, Springer, Heidelberg, 2005, pp. 331–333
8. R.W. Collins, Rev. Sci. Instrum. 61, 2029 (1990)10.1063/1.1141417 ↗
9. Interestingly, we find that the low-spatial-frequency behavior of the surface roughness is strongly influenced by variations in the surface mean free path. In particular, we have indication that the long-range autocorrelation length of the roughness is proportional to the growth rate for samples of type (iii).
10. G.E. Jellison, Thin Solid Films 290–291, 40 (1996)10.1016/S0040-6090(96)09009-8 ↗
11. R.M.A. Azzam, N.M. Bashara, Ellipsometry and Polarized Light, North-Holland, Amsterdam, 1986
12. H.G. Tompkins and E. Irene, eds., Handbook of Ellipsometry (Heidelberg: Springer, 2005), p. 639.10.1007/3-540-27488-X ↗
13. The pseudo-dielectric function obtained from our smoothest samples does not superimpose to that of C. Kim, M. Daraselia, J.W. Garland and S. Sivananthan, Phys. Rev. B 56, 4786 (1997). To our best knowledge, the aforementioned paper contains the only reference data for MBE-grown CdTe(211)B/Si(211). The discrepancies are probably due to the surface morphology, which depends on both the growth recipe and the type of substrate (Ge vs. Si).10.1103/PhysRevB.56.4786 ↗
14. J.W. Hutchins, B.J. Skromme, Y.P. Chen, S. Sivananthan, and J.B. Posthill, Appl. Phys. Lett. 71, 350 (1997)10.1063/1.119534 ↗
15. A back-of-the-envelope calculation based on the formulae contained in P. Etchegoin, J. Kircher, M. Cardona, and C.␣Grein, Phys. Rev. B 45, 11721 (1992), and the CdTe deformation potentials in H. Mathieu, J. Allegre, A. Chatt, and P. Lefebvre, Phys. Rev. B 74, 7740 (1998) indicates that the shift in the position of the E1 critical point for strain of this magnitude is not observable at room temperature.10.1103/PhysRevB.45.11721 ↗
16. The substrate dielectric function used in the calculations was taken from Arwin and Aspnes, J. Vac. Sci. Technol. A 2, 1316 (1984), Fig. 1.
17. J.T. Zettler, J. Rumberg, K. Ploska, K. Stahrenberg, M. Pristovsek, W. Richter, M. Wassermeier, P. Schützendübe, J. Behrend, and L. Däweritz, Phys. Stat. Sol. (a) 152, 35 (1995).10.1002/pssa.2211520104 ↗
18. For a better description of the limitations of the Bruggeman EMA in the isotropic case, see D. Franta and I. Ohlidal, Opt. Comm. 248, 459 (2005), and references contained therein. In␣general, the EMA describes roughness of high spatial frequency, but fails for films exhibiting a wide interval of frequencies, such as our very rough samples. These samples would be better described by a combination of an anisotropic EMA and the Rayleight-Rice scattering theory, extended to anisotropic power density functions. Work is being carried out in this direction.10.1016/j.optcom.2004.12.016 ↗
19. See H. Goldstein, Classical Mechanics. (Cambridge, MA: Addison Wesley, 2001)
20. D.J. De Smet, Surf. Sci. 96, 293 (1976)10.1016/0039-6028(76)90454-4 ↗
21. H. Wohler, M. Fritsch, G. Haas, and D.A. Mlynski, J. Opt. Soc. Am. A 8, 536 (1991)10.1364/JOSAA.8.000536 ↗
22. D.W. Berreman, J. Opt. Soc. Am. 62, 502 (1972)10.1364/JOSA.62.000502 ↗
23. H. Wohler, G. Haas, M. Fritsch, and D.A. Mlynski, J. Opt. Soc. Am. A 5, 1554 (1988)10.1364/JOSAA.5.001554 ↗
24. In-situ data taken during growth and a better description of the data analysis method can be found in G. Badano et al., J. Cryst. Growth 296, 129 (2006), and references contained therein.10.1016/j.jcrysgro.2006.08.026 ↗