journal article·2004-09

Effect of bump characteristics and temperature variation on the online contact resistance of anisotropic conductive joints

Lafir Ali, Y. C. Chan, M. O. Alam

Journal of Electronic Materials· Volume 33· Issue 9
Publisher page

Abstract

Anisotropic conductive film (ACF) suffers a major drawback in regard to reliability even though it has merits, such as reduction in interconnection distance, high performance, and environmental friendliness. The factor of thermal warpage may lead to a highly unreliable electrical connection in the assembly. The work presented in this paper focuses on the online contact-resistance behavior of the ACF joint during thermal shock and compares the results of two different types of dies (Au/Ni bump and bumpless). For this work, we used a flip chip of 11 × 3 mm2 in dimension. The flex substrate used was made of polyimide film with an Au/Ni/Cu electrode and daisy-chained circuit for a matching die-bump pattern. The ACF that was used is an epoxy resin in which nickel and gold-coated polymer balls are dispersed. Tests for three different thermal-cycling profiles (125°C to −55°C, 140°C to −40°C, and 150°C to −65°C) were carried out. The samples bonded at a temperature of 180°C, and a pressure of 80 N was used. The initial contact resistances of Au/Ni bump and bumpless samples were 0.25 ω and 0.4 ω respectively. A comparative study was carried out from the results obtained. The results showed that for the flip-chip-on-flex (FCOF) packages having an Au/Ni bump, the increase in online contact resistance is higher than that of the FCOF packages having bumpless chips. For example, in the thermal-cycling profile of 140°C to −40°C, the online contact resistance for the Au/Ni bump raised to 4.6 ω after 180 cycles, whereas it was only 1.3 ω for the bumpless sample. The bump height and bump materials were found to be the main factor for such variation. Results show that, above the glass-transition temperature (Tg), the ACF matrix becomes less viscous, which reduces its adhesive strength and lets the higher bump height of the chip result in a higher standoff of the package and thus sliding is easier to take place. The responses by the assemblies in hot and cold conditions are examined, and in-chamber behavior of the assembly is studied and explained.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Electronic Packaging and Soldering Technologies · Thermal properties of materials · Adhesion, Friction, and Surface Interactions

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (13)

Show source-provided references
1. M.-J. Yim and K.-W. Paik, IEEE Trans. Adv. Packaging 22, 166 (1999).10.1109/6040.763188 ↗
2. C.M.L. Wu, J. Liu, and N.H. Young, “The Effect of Bump Height on the Reliability of ACF in Flip Chip,” Soldering & Surface Mount Technology, Vol. 13, No. 1 (2001), pp. 25–30.10.1108/09540910110361686 ↗
3. J.B. Nysaether, Z. Lai, and J. Liu, IEEE Trans. Adv. Packaging 23, 743 (2000).10.1109/6040.883767 ↗
4. J. Liu, Conductive Adhesive for Electronics Packaging (Isle of Man, UK: Electrochemical Publications Ltd., 1999), pp. 234–248.
5. M.J. Yim, Y.D. Joen, and K.W. Paik, IEEE Trans. Electron. Packaging Manufacturing 23, 171 (2000).10.1109/6104.873244 ↗
6. S. Rzepka, B. Waidhaus, and E. Meusal, Microsystem Technol. 1, 129 (1995).10.1007/BF01294804 ↗
7. V.A. Chirac and T.-Y.T. Lee, IEEE Trans. Comp. Packaging Technology 24, 673 (2001).10.1109/6144.974960 ↗
8. J.H. Zhang and Y.C. Chan, J. Electron. Mater. 32, 228 (2003).10.1007/s11664-003-0214-z ↗
9. D. Lu, Q.K. Tong, and C.P. Wong, IEEE Trans. Electron. Packaging Manufacturing 22, 228 (1999).10.1109/6104.795858 ↗
10. M.A. Uddin, M.D. Alam, Y.C. Chan, and H.P. Chan, “Adhesion Strength and Contact Resistance of Flip-Chip on Flex Packages — Effect of Curing Degree of Anisotropic Conductive Film”, Microelectronics Reliability, Vol. 44, No. 3 (2004), pp. 505–514.10.1016/S0026-2714(03)00185-9 ↗
11. C.Y. Yin, M.O. Alam, Y.C. Chan, C. Bailey, and H. Lu, Microelectron. Reliab. 43, 625 (2003).10.1016/S0026-2714(02)00348-7 ↗
12. K. Pinnardi, Z. Lai, D. Vogel, Y.L. Kang, J. Liu, S. Liu, R. Haug, and M. Villander, IEEE Trans. Comp. Packaging Technol. 23, 447 (2000).10.1109/6144.868843 ↗
13. L. Frisk, J. Jarvinen, and R. Ristolainen, Microelectron. Reliab. 42, 1559 (2002).10.1016/S0026-2714(02)00190-7 ↗