Wetting Behavior of Ternary Au-Ge-X (X = Sb, Sn) Alloys on Cu and Ni
Source abstract
Abstract
Au-Ge-based alloys are potential substitutes for Pb-rich solders currently used for high-temperature applications. In the present work, the wetting behavior of two Au-Ge-X (X = Sb, Sn) ternary alloys, i.e., Au-15Ge-17Sb and Au-13.7 Ge-15.3Sn (at.%), in contact with Cu and Ni substrates has been investigated. Au-13.7Ge-15.3Sn alloy showed complete wetting on both Cu and Ni substrates. Total spreading of Au-15Ge-17Sb alloy on Cu was also observed, while the final contact angle of this alloy on Ni was about 29°. Pronounced dissolution of Cu substrates into the solder alloys investigated was detected, while the formation of Ni-Ge intermetallic compounds at the interface of both solder/Ni systems suppressed the dissolution of Ni into the solder.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Electronic Packaging and Soldering Technologies · Semiconductor materials and interfaces · Intermetallics and Advanced Alloy Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (26)
Show source-provided references
1. V. Chidambaram, J. Hald, and J. Hattel, J. Alloy. Compd. 490, 170 (2010).10.1016/j.jallcom.2009.10.108 ↗
2. V. Chidambaram, J. Hattel, and J. Hald, Microelectron. Eng. 88, 981 (2011).10.1016/j.mee.2010.12.072 ↗
3. F.Q. Lang, H. Yamaguchi, H. Ohashi, and H. Sato, J. Electron. Mater. 40, 1563 (2011).10.1007/s11664-011-1661-6 ↗
4. V. Chidambaram, H.B. Yeung, and G. Shan, J. Electron. Mater. 41, 2107 (2012).10.1007/s11664-012-2114-6 ↗
5. B. Massalski, Binary Alloy Phase Diagrams (Metals Park, OH: ASM, 1990).
6. J.N. Lalena, N.F. Dean, and M.W. Weiser, Electron. Mater. 31, 1244 (2002).10.1007/s11664-002-0016-8 ↗
7. S. Takeda, H. Fujii, Y. Kawakita, S. Tahara, S. Nakashima, S. Kohara, and M. Itou, J. Alloy. Compd. 452, 149 (2008).10.1016/j.jallcom.2007.02.132 ↗
8. J. Wang, C. Leinenbach, and M. Roth, J. Alloy. Compd. 485, 577 (2009).10.1016/j.jallcom.2009.06.030 ↗
9. J. Wang, C. Leinenbach, and M. Roth, J. Alloy. Compd. 481, 830 (2009).10.1016/j.jallcom.2009.03.114 ↗
10. Z. Wang and P. Wynblatt, Acta Mater. 46, 4853 (1998).10.1016/S1359-6454(98)00202-X ↗
11. R.G. Gilliland, Weld. J. 43, 248 (1964).
12. C. Leinenbach, F. Valenza, D. Giuranno, H.R. Elsener, S. Jin, and R. Novakovic, J. Electron. Mater. 40, 1533 (2011).10.1007/s11664-011-1639-4 ↗
13. C.Y. Li and X. Wang, Solder. Surf. Mt. Technol. 21, 4 (2009).
14. S.T. Cui, Z.F. Wang, H.B. Wu, and J.W. Liu, Rare Met. Mater. Eng. 37, 690 (2008).10.1016/S1875-5372(09)60018-7 ↗
15. L. Kaufman and H. Bernstein, Computer Calculation of Phase Diagrams (New York: Academic, 1970).
16. G. Zwingmann, Z. Metallkd. 55, 192 (1964).
17. D. Mouani, C. Souleau, and B. Legendre, J. Chim. Phys. 89, 2107 (1992).10.1051/jcp/1992892107 ↗
18. N. Eustathopoulos, M.G. Nicholas, and B. Drevet, Wettability at High Temperatures, Vol. 3 (Oxford: Pergamon Materials Series, 1999).
19. F. Valenza, M.L. Muolo, and A. Passerone, J. Mater. Sci. 45, 2071 (2010).10.1007/s10853-009-3801-4 ↗
20. M. Viviani, ICFAM-CNR Technical Report, CNR Genoa (1999).
21. L. Liggieri and A. Passerone, High Temp. Technol. 7, 82 (1989).10.1080/02619180.1989.11753417 ↗
22. B. Sundman, B. Jansson, and J.O. Andersson, CALPHAD 9, 153 (1985).10.1016/0364-5916(85)90021-5 ↗
23. S. Ogawa and D. Watanabe, J. Appl. Phys. 22, 1502 (1951).10.1063/1.1699901 ↗
24. B.W. Batterman, J. Appl. Phys. 28, 556 (1957).10.1063/1.1722802 ↗
25. R. Kubiak and J. Janczak, J. Alloy. Compd. 176, 133 (1991).10.1016/0925-8388(91)90018-Q ↗
26. A. Paul, J. Mater. Sci.: Mater. Electron. 22, 833 (2011).10.1007/s10854-010-0220-x ↗