journal article·2011-04

Improved Stability of Pd/Ti Contacts to p-Type SiC Under Continuous DC and Pulsed DC Current Stress

B. P. Downey, S. E. Mohney, J. R. Flemish

Journal of Electronic Materials· Volume 40· Issue 4
Publisher page

Abstract

The enhanced stability of Pd/Ti contacts to p-type SiC under high-current-density continuous direct-current (DC) stressing is investigated and compared with previous work on Ti/Al contacts. Additionally, differing failure modes were observed for the Pd/Ti contacts under continuous DC and pulsed DC stress. The improved stability of the Pd/Ti contacts is demonstrated through a 29% increase in the applied continuous DC current required to cause electrical failure during a 1 h test compared with the Ti/Al contacts. The metallization scheme includes a TiW barrier and a thick electroplated Au overlayer. While severe intermixing and voiding in the ohmic contact layer caused the Pd/Ti contacts to fail under continuous DC stress, electromigration of the Au overlayer degraded the contacts under pulsed DC stress. The temperature of the surface of the contacts was reduced from over 649°C for contacts that failed under continuous DC current to between 316°C and 371°C for pulsed DC current. The difference in temperature and failure modes of the continuous and pulsed DC stressed contacts indicates different failure mechanisms.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Silicon Carbide Semiconductor Technologies · Copper Interconnects and Reliability · Semiconductor materials and devices

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (15)

Show source-provided references
1. Q. Zhang and A.K. Agarwal, Phys. Status Solidi A 206, 2431 (2009).10.1002/pssa.200925103 ↗
2. D.W. Malone and R.E. Hummel, J. Appl. Phys. 83, 5750 (1998).10.1063/1.367431 ↗
3. B.P. Downey, J.R. Flemish, B.Z. Liu, T.E. Clark, and S.E. Mohney, J. Electron. Mater. 38, 563 (2009).10.1007/s11664-008-0612-3 ↗
4. B.P. Downey, S.E. Mohney, T.E. Clark, and J.R. Flemish, Microelectron. Reliab. 50, 1967 (2010).10.1016/j.microrel.2010.07.007 ↗
5. L. Kassamakova, R.D. Kakanakov, I.V. Kassamakov, N. Nordell, S. Savage, B. Hjorvarsson, E.B. Svedberg, L. Abom, and L.D. Madsen, IEEE Trans. Electron. Dev. 46, 605 (1999).10.1109/16.748885 ↗
6. L. Kolaklieva, R. Kakanakov, Ts. Marinova, and G. Kakanakov, Mater. Sci. Forum 483–485, 749 (2005).10.4028/www.scientific.net/MSF.483-485.749 ↗
7. L. Kolaklieva, R. Kakanakov, E. Polychroniadis, E. Pavlidou, I. Tsiaousis, B. Albert, and A. Andreadou, J. Nano Res. 10, 77 (2010).10.4028/www.scientific.net/JNanoR.10.77 ↗
8. Ts. Marinova, A. Kakanakova-Georgieva, V. Krastev, R. Kakanakov, M. Neshev, L. Kassamakova, O. Noblanc, C. Arnodo, S. Cassette, C. Brylinski, B. Pecz, G. Radnoczi, and Gy. Vincze, Mater. Sci. Eng. B 46, 223 (1997).10.1016/S0921-5107(96)01981-2 ↗
9. V.Q. Ho, J. Electron. Mater. 18, 493 (1989).10.1007/BF02657778 ↗
10. Y.T. Kim, C.-H. Jun, J.H. Lee, J.T. Baek, and H.J. Yoo, J. Vac. Sci. Technol. A 14, 3245 (1996).10.1116/1.580220 ↗
11. Y.T. Kim, C.-H. Jun, and D.Y. Kim, Thin Solid Films 347, 214 (1999).10.1016/S0040-6090(99)00040-1 ↗
12. S.J. Chua and S.H. Lee, Solid State Electron. 35, 1331 (1992).10.1016/0038-1101(92)90168-C ↗
13. G.S. Marlow and M.B. Das, Solid State Electron. 25, 91 (1982).10.1016/0038-1101(82)90036-3 ↗
14. W. Pamler, Surf. Interface Anal. 13, 55 (1988).10.1002/sia.740130112 ↗
15. S. Kilgore, C. Gaw, H. Henry, D. Hill, and D. Schroder, Mater. Res. Soc. Symp. P. 863, B8.30.1 (2005).10.1557/PROC-863-B8.30 ↗