journal article·2003-06

Interfacial microstructure and intermetallics developed in the interface between in solders and Au/Ni/Ti thin films during reflow process

Keesam Shin, Won-Gu Cho, Young-Ho Kim

Journal of Electronic Materials· Volume 32· Issue 6
Publisher page

Abstract

Intermetallic phases and microstructures formed between In solder and Au/Ni/Ti thin films during reflow were characterized using x-ray diffraction (XRD), scanning electron microscopy (SEM), and transmission electron microscopy (TEM). Two types of two-step heat treatment were performed in a rapid thermal annealing (RTA) system or in a furnace to simulate the flip-chip solder-joining process. The AuIn2 and In27Ni10 intermetallic phases were observed after the two-step heat treatment at the lower temperature. Additional In-Ni intermetallic layers formed between the In27Ni10 and Ni layer, which was two-step heat treated at the higher temperature. This phase was identified as metastable InNi of CsCl type with a=∼3.1 A by convergent-beam electron diffraction (CBED).
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Electronic Packaging and Soldering Technologies · Semiconductor materials and interfaces · Intermetallics and Advanced Alloy Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (16)

Show source-provided references
1. J.T. Moon, S.H. Lee, K.J. Joo, H.T. Lee, M.G. Song, and K.A. Pyun, Kor. J. Mater. Res. 7, 330 (1997).
2. M. Mori, Y. Kizaki, M. Saito, and A. Hongu, IEEE Trans. Comp., Hydrids, Manuf. Technol. 16, 852 (1993).10.1109/33.273684 ↗
3. J.C. Hwang, IEEE Trans. Comp. Packag. Manuf. Technol. Part A 18, 458 (1995).10.1109/95.465136 ↗
4. J.H. Lau, Flip Chip Technologies (New York: McGraw-Hill, 1996), pp. 123–126.
5. R.R. Tummala, E.J. Rymaszewski, and A.G. Klopfenstein, Microelectronics Packaging Handbook Part II (New York: Chapman & Hall, 1997), pp. 129–185.
6. E.K. Yung and I. Turlik, 10th IEPS Conf. Proc. 1065 (1990).
7. K. Mizuishi and T. Mori, IEEE Trans. Comp., Hybrids, Manuf. Technol. 11, 481 (1988).10.1109/33.16686 ↗
8. K.P. Gurov, V.N. Pimenov, and S.G. Radkovskiy, Russ. Metall. 3, 52 (1978).
9. C.R. Kao, Mater. Sci. Eng. A238, 200 (1997).
10. R. Davenaux and I. Turlik, IEEE Trans. Comp., Hydrids, Manuf. Technol. 13, 929 (1990).10.1109/33.62558 ↗
11. C.-Y. Lee, Y.-H. Kim, and C.S. Kim, J. Kor. Inst. Metal Mater. 35, 1395 (1997).
12. K.T. Puttlitz, IEEE Trans. Comp., Hydrids, Manuf. Technol. 13, 647 (1990).10.1109/33.62574 ↗
13. C.J. Chen and K.L. Lin, IEEE Trans. Comp. Packag. Manuf. Technol. Part B 20, 211 (1997).10.1109/96.618218 ↗
14. Y.H. Tseng, M.S. Yeh, and T.H. Chuang, J. Electron. Mater. 28, 105 (1999).10.1007/s11664-999-0226-4 ↗
15. G.H. Kim, Bull. Kor. Inst. Metal Mater. 9, 633 (1996).
16. T.B. Massalski, Binary Alloy Phase Diagrams, vol. 2 (Metals Park, OH: ASM, 1986), p. 1386.