A Novel Stress Characterization Technique for the Development of Low-Stress Ohmic Contacts to HgCdTe
Source abstract
Abstract
HgCdTe material intended for long-wavelength infrared detection is particularly susceptible to damage from stress. As a result, an ideal ohmic contact needs to have good adhesion and low specific contact resistance. The contact should act as a diffusion barrier and induce the least amount of stress in the underlying material. In this paper we present a set of stress measurements from different ohmic contact materials deposited on short- and long-wavelength HgCdTe films grown by liquid-phase epitaxy (LPE). Using a new experimental technique we remove the substrate and measure the stress induced on single- and multilayered HgCdTe cantilevers. To interpret our results, we develop a theoretical model that describes the physics of elastic deformation in HgCdTe layers. Our model is based on classical thin-plate bending theory and explicitly takes into account the realistic boundary conditions that are present in the experimental setup by using a variational approach.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced Semiconductor Detectors and Materials · Semiconductor Quantum Structures and Devices · Adhesion, Friction, and Surface Interactions
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (20)
Show source-provided references
1. E.H.P.W.D. Lawson, S. Nielsen, A.S. Young, J. Phys. Chem. Solids 9, 325 (1959)10.1016/0022-3697(59)90110-6 ↗
2. P. Norton, Opto-Electron. Rev. 10, 159 (2002)
3. A. Rogalski, Rep. Prog. Phys. 68, 2267 (2005)10.1088/0034-4885/68/10/R01 ↗
4. A. Rogalski, Infrared Photon Detectors (SPIE—The International Society for Optical Engineering, 1995), ISBN 0-8194-1798-X.
5. P. Costa, P. Tribolet, and G. Destefanis, Recent Results on SOFRADIR HgCdTe Detectors. Available at http://www.sofradir.com/_pdf/recent_results_on_Sofradir_HgCdTe_detectors.pdf .
6. A. Rogalski, Handbook of Infrared Detection Technologies, ed. M. Henini and M. Razeghi (Oxford: Elsevier Science, 2002), chap. 2, ISBN 1856173887.
7. R.S. List, J. Vac. Sci. Technol. B 10, 1651 (1992)10.1116/1.586263 ↗
8. P. Lamarre, C. Fulk, D. D'Orsogna, E. Bellotti, F. Smith, P. LoVecchio, M.B. Reine, T. Parodos, J. Marciniec, S.P. Tobin, and J. Markunas, J. Electron. Mater. (2009). doi: 10.1007/s11664-009-0771-x .10.1007/s11664-009-0771-x ↗
9. O. Fraft and H. Gao, Diffusion Processes in Advanced Technological Materials, ed. D. Gupta (Norwich, NY: William Andrew Publishing, 2005), pp. 365–404, chap. 8, ISBN 0-8155-1501-4.10.1016/B978-081551501-2.50010-1 ↗
10. A. Ugural, Stresses in Plates and Shells (McGraw-Hill, Inc., 1981), ISBN 0-07-065730-0.
11. M. Ohring, Materials Science of Thin Films (San Diego, CA: Academic Press, 2002), ISBN 978-0-12-524975-1.10.1016/B978-012524975-1/50004-5 ↗
12. L. Freund and S. Suresh, THIN FILMMATERIALS: Stress, Defect Formation and Surface Evolution (Cambridge, UK: Cambridge University Press, 2003), ISBN 0-521-82281-5.
13. G.G. Stoney, Proc. Roy. Soc. London A 82, 172 (1909).10.1098/rspa.1909.0021 ↗
14. J. Floro, S. Heame, J. Hunter, P. Kotula, E. Chason, S. Seel, C. Thompson, J. Appl. Phys. 89, 4886 (2001)10.1063/1.1352563 ↗
15. J. Thornton, Annual Review of Materials Science 7, 239 (1977)10.1146/annurev.ms.07.080177.001323 ↗
16. R. Koch, J. Phys: Condens. Matter 6, 9519 (1994)
17. C. Thompson, Annual Review of Materials Science 30, 159 (2000)10.1146/annurev.matsci.30.1.159 ↗
18. G. D. Davis, J. Vac. Sci. Technol. A 6, 1939 (1988)10.1116/1.575210 ↗
19. G. D. Davis, W. A. Beck, M. K. Kelly, D. Kilday, Y. W. Mo, N. Tache, and G. Margaritondo, Phys. Rev. B 38, 9694 (1988)10.1103/PhysRevB.38.9694 ↗
20. G. D. Davis, W. A. Beck, M. K. Kelly, N. Tache, and G. Margaritondo, J. Appl. Phys. 60, 3157 (1986)10.1063/1.337728 ↗