journal article·2009-12

Inhomogeneous Consumption of the Electroless Ni-P Layer at the Solder Joint Formed with Sn-3.5Ag-0.7Cu

Yong-Jun Oh, Sung-Yong Oh

Journal of Electronic Materials· Volume 38· Issue 12
Publisher page

Abstract

This report investigates the phenomenon of interfacial serration at the joint between Sn-3.5Ag-0.7Cu solder (SAC) and electroless Ni-P underbump metallization (UBM) during aging. For comparison, the interface between SAC and electrolytic Ni UBM was also examined under similar aging conditions. The joint in the electrolytic Ni/SAC sample showed a smooth, flat interface between the Ni and intermetallic compounds, even after a long aging time. In contrast, electroless Ni-P/SAC exhibited an irregular interface, the irregularity of which became more severe with increased aging time. This observed roughness was initiated by large breaks across the P-rich layer. The breaks were filled with the overlying Ni-Sn-P phase material, which provided an easier interdiffusion path for Ni and Sn in the opposite direction. As a result, the local consumption of the Ni(-P) layer was accelerated, and the interface was serrated. The local maximum consumption rate of the Ni-P layer, as calculated from the minimum thickness of this layer in each sample with aging time, was similar to that of an electrolytic Ni layer.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Electronic Packaging and Soldering Technologies · 3D IC and TSV technologies · Advanced Welding Techniques Analysis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (30)

Show source-provided references
1. K. Zeng, and K.N. Tu, Mater. Sci. Eng., R 38, 55 (2002). doi: 10.1016/S0927-796X(02)00007-4 .10.1016/S0927-796X(02)00007-4 ↗
2. E. Bradley, NEMI Meeting (NEMI-National Electronics Manufacturing Initiative, Inc., Herndon, VA) (Anaheim, CA, February 23, 1999).
3. K. Suganuma, Curr. Opin. Solid State Mater. Sci. 5, 55 (2001). doi: 10.1016/S1359-0286(00)00036-X .10.1016/S1359-0286(00)00036-X ↗
4. J. Glazer, J. Electron. Mater. 23, 693 (1994). doi: 10.1007/BF02651361 .10.1007/BF02651361 ↗
5. S.K Kang, and A.K. Sarkhel, J. Electron. Mater. 23, 701 (1994). doi: 10.1007/BF02651362 .10.1007/BF02651362 ↗
6. W.K. Choi, J. H. Kim, S.W. Jeong, and H.M. Lee, J. Mater. Res. 17, 43 (2002). doi: 10.1557/JMR.2002.0009 .10.1557/JMR.2002.0009 ↗
7. W.K. Choi, and H.M. Lee, J. Electron. Mater. 29, 1207 (2000). doi: 10.1007/s11664-000-0014-7 .10.1007/s11664-000-0014-7 ↗
8. M. Abtew, and G. Selvaduray, Mater. Sci. Eng., R 27, 95 (2000). doi: 10.1016/S0927-796X(00)00010-3 .10.1016/S0927-796X(00)00010-3 ↗
9. P.L. Tu, Y.C. Chan, K.C. Hung, and J.K.L. Lai, Scr. Mater. 44, 317 (2001). doi: 10.1016/S1359-6462(00)00590-X .10.1016/S1359-6462(00)00590-X ↗
10. A. Zribi, A. Clark, L. Zavalij, P. Borgesen, and E.J. Cotts, J. Electron. Mater. 30, 1157 (2001). doi: 10.1007/s11664-001-0144-6 .10.1007/s11664-001-0144-6 ↗
11. M.O. Alam, Y.C. Chan, and K.C. Hung, Microelectron. Reliab. 42, 1065 (2002). doi: 10.1016/S0026-2714(02)00068-9 .10.1016/S0026-2714(02)00068-9 ↗
12. J.W. Jang, D.R. Frear, T.Y. Lee, and K.N. Tu, J. Appl. Phys. 88, 6359 (2000). doi: 10.1063/1.1321787 .10.1063/1.1321787 ↗
13. P.G. Kim, J.W. Jang, T.Y. Lee, and K.N. Tu, J. Appl. Phys. 86, 6746 (1999). doi: 10.1063/1.371751 .10.1063/1.371751 ↗
14. P.L. Liu, Z. Xu, and J.K. Shang, Metall. Mater. Trans., A 31, 2857 (2000).10.1007/BF02830353 ↗
15. H. Matsuki, H. Ibuka, and H. Saka, Sci. Technol. Adv. Mater. 3, 261 (2002). doi: 10.1016/S1468-6996(02)00025-6 .10.1016/S1468-6996(02)00025-6 ↗
16. Y.D. Jeon, K.W. Paik, K.S. Bok, W.S. Choi, and C.L. Cho, J. Electron. Mater. 31, 520 (2002). doi: 10.1007/s11664-002-0109-4 .10.1007/s11664-002-0109-4 ↗
17. H.B. Kang, J.W Lee, J.H Bae, and M.H. Park, J. Mater. Res. 23, 2195 (2008). doi: 10.1557/jmr.2008.0266 .10.1557/JMR.2008.0266 ↗
18. A. Kumar, M. He, Z. Chen, and P.S. Teo, Thin Solid Films 462-463, 413 (2004). doi: 10.1016/j.tsf.2004.05.042 .10.1016/j.tsf.2004.05.042 ↗
19. D.G. Kim, J.W. Kim, and S.B. Jung, Mat. Sci. Eng., B 121, 204 (2005). doi: 10.1016/j.mseb.2005.03.033 .10.1016/j.mseb.2005.03.033 ↗
20. G. Dietz, and H.D. Schneider, J Phys.: Condens. Matter 2, 2169 (1990). doi: 10.1088/0953-8984/2/9/006 .10.1088/0953-8984/2/9/006 ↗
21. Y.C. Sohn, Jin Yu, S.K. Kang, W.K. Choi, and D.Y. Shih, J. Mater. Res. 18, 4 (2003). doi: 10.1557/JMR.2003.0002 .10.1557/JMR.2003.0002 ↗
22. J.W. Yoon, S.W. Kim, and S.B. Jung, J. Alloys Compd. 392, 247 (2005). doi: 10.1016/j.jallcom.2004.09.045 .10.1016/j.jallcom.2004.09.045 ↗
23. K.S. Kim, S.H. Huh, and K. Suganuma, J. Alloys Compd. 352, 226 (2003). doi: 10.1016/S0925-8388(02)01166-0 .10.1016/S0925-8388(02)01166-0 ↗
24. K. Zeng, V. Vuorinen, and J.K. Kivilahti, IEEE Trans. Electron. Packag. Manuf. 25, 162 (2002). doi: 10.1109/TEPM.2002.801648 .10.1109/TEPM.2002.801648 ↗
25. M.N. Islam, Y.C. Chan, A Sharif, and M.O. Alam, Microelectron. Reliab. 43, 2031 (2003). doi: 10.1016/S0026-2714(03)00190-2 .10.1016/S0026-2714(03)00190-2 ↗
26. K. Suganuma, and K.S. Kim, JOM 60, 61 (2008). doi: 10.1007/s11837-008-0074-3 .10.1007/s11837-008-0074-3 ↗
27. B.K. Kim, S.J. Lee, J.Y. Kim, K.Y. Ji, Y.J. Yoon, M.Y. Kim, S.H. Park, and J.S. Yoo, J. Electron. Mater. 37, 527 (2008). doi: 10.1007/s11664-007-0360-9 .10.1007/s11664-007-0360-9 ↗
28. K. Zeng, R. Stierman, D. Abbott, and M. Murtuza, JOM 58, 75 (2006). doi: 10.1007/s11837-006-0187-5 .10.1007/s11837-006-0187-5 ↗
29. ASTM B 733-97 appendix, “Standard Specification for Autocatalytic (Electroless) Nickel-Phosphorus Coatings on Metal,” ASTM international.
30. W. Riedel, “Electroless Nickel Plating,” ASM international, Metals Park, OH, 1991, p.92.