Effect of Sn Grain c-Axis on Cu Atomic Motion in Cu Reinforced Composite Solder Joints Under Electromigration
Source abstract
Abstract
Because of its tetragonal structure, β-Sn exhibits anisotropy in electromigration behavior. The diffusivity of Cu atoms along the c-axis of Sn is much faster than that along the a-axis; therefore, the orientation of the c-axis exerts a strong influence on Cu atomic motion. In this work, the effect of Sn grain c-axis on Cu atomic motion was investigated by using Cu reinforced Sn3.5Ag composite solder joints. The microstructure and morphology of the solder joints were characterized by scanning electron microscopy (SEM) equipped with a backscattered electron (BSE) detector. It was found that intermetallic compounds (IMCs) in the solder matrix were formed due to the migration of Cu atoms to the surface of the solder joint under current stressing. There was a large amount of IMCs on the solder matrix which protruded from the solder matrix. By changing the direction of electron flow, i.e. changing the anode and the cathode side, the IMCs which formed after current stressing in the solder matrix disappeared and the protruding Sn remained unchanged. The results revealed that the growth of IMCs was closely related to the migration of Cu atoms, while Cu atomic motion depended on the orientation of the Sn grain c-axis.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Electronic Packaging and Soldering Technologies · Aluminum Alloys Composites Properties · 3D IC and TSV technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (25)
Show source-provided references
1. M. Abtew and G. Selvaduray, Mater. Sci. Eng. R Rep. 95, 27 (2000).
2. I.E. Anderson, J. Mater. Sci. Mater. Electron. 55, 18 (2006).
3. S. Cheng, C.-M. Huang, and M. Pecht, Microelectron. Reliab. 77, 75 (2017).
4. K. Suganuma, Curr. Opin. Solid State Mater. Sci. 55, 5 (2001).
5. F. Guo, J. Mater. Sci. Mater. Electron. 129, 18 (2006).
6. J. Shen and Y.C. Chan, Microelectron. Reliab. 223, 49 (2009).
7. K.N. Subramanian, T.R. Bieler, and J.P. Lucas, J. Electron. Mater. 1176, 28 (1999).
8. D. Lin, G.X. Wang, T.S. Srivatsan, M. Al-Hajri, and M. Petraroli, Mater. Lett. 333, 53 (2002).
9. F. Tai, F. Guo, M.T. Han, Z.D. Xia, Y.P. Lei, and Y.W. Shi, Mater. Sci. Eng. A 3335, 527 (2010).
10. S.W. Chen, C.M. Chen, C.H. Wang, and C.M. Hsu, Effects of Electromigration on Electronic Solder Joints, 1st edn. (West Sussex: Wiley, 2012), pp. 401–422.
11. X. Li, F. Sun, H. Zhang, M. Liu, and R. Fan, J. Alloys Compd. 388, 739 (2018).10.1016/j.jallcom.2018.07.038 ↗
12. Y. Kimura, H. Ikadai, T. Nakakura, and M. Saka, Mater. Lett. 219, 184 (2016).
13. A.T. Wu, A.M. Gusak, K.N. Tu, and C.R. Kao, Appl. Phys. Lett. 241902, 86 (2005).
14. M.H. Lu, D.Y. Shih, P. Lauro, C. Goldsmith, and D.W. Henderson, Appl. Phys. Lett. 211909, 92 (2008).
15. C.F. Lin, S.H. Lee, and C.M. Chen, Metall. Mater. Trans. A 2571, 43 (2012).
16. B.F. Dyson, J. Appl. Phys. 3408, 38 (1967).
17. M.L. Huang, J.F. Zhao, Z.J. Zhang, and N. Zhao, Acta Mater. 98, 100 (2015).
18. J.Q. Chen, K.L. Liu, J.D. Guo, H.C. Ma, S. Wei, and J.K. Shang, J. Alloys Compd. 264, 703 (2017).
19. Y.C. Hu, Y.H. Lin, C.R. Kao, and K.N. Tu, J. Mater. Res. 2544, 18 (2011).
20. T.C. Huang, T.L. Yang, J.H. Ke, C.H. Hsueh, and C.R. Kao, Scr. Mater. 37, 80 (2014).
21. Y. Wang, J. Han, Y. Wang, L. Ma, and F. Guo, J. Electron. Mater. 96, 47 (2018).
22. T.L. Yang, J.J. Yu, C.C. Li, Y.F. Lin, and C.R. Kao, J. Alloys Compd. 281, 627 (2015).
23. Y. Wang, Y. Wang, J. Han, S. Tan, and F. Guo, J. Mater. Sci. Mater. Electron. 5954, 29 (2018).
24. Y.A. Shen and C. Chen, Scr. Mater. 6, 128 (2017).
25. D.C. Yeh and H.B. Huntington, Phys. Rev. Lett. 1469, 53 (1984).