Evaluating the Impact of Dwell Time on Solder Interconnect Durability Under Bending Loads
Source abstract
Abstract
With increased portability and miniaturization of modern day electronics, the mechanical robustness of these systems has become more of a concern. Existing standards for conducting mechanical durability tests of electronic assemblies include bend, shock/drop, vibration and torsion. Though these standards provide insights into both cyclic fatigue and overstress damage incurred in the solder interconnects (widely regarded as the primary mode of failure in electronic assemblies), they fail to address the impact of time dependent (creep) behavior due to sustained mechanical loads on the solder interconnect durability. It has been seen that the solder durability under thermal cycling loads is inversely proportional to the dwell time or hold time at either temperature extreme of the imposed temperature cycle. Fatigue life models, which include dwell time, have been developed for solder interconnects subject to temperature cycling. However the fatigue life models that have been developed in literature for solder interconnects under mechanical loads fail to address the impact the duration of loading. In this study, solder interconnect test vehicles were subject to cyclic mechanical bending with varying dwell times in order to understand the impact of duration of mechanical loads on the solder interconnect durability. The solder interconnects examined in this study were formed with 2512 resistor packages using varying solder compositions (SnPb and SAC305). In order to evaluate the impact of dwell time, the boards were tested with a 60 second and a 300 second dwell time on both extremes of the loading profile. It was observed that an increase in dwell time of the loading profile resulted in a decrease in the characteristic life of the solder interconnects.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Electronic Packaging and Soldering Technologies · 3D IC and TSV technologies · Integrated Circuits and Semiconductor Failure Analysis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (25)
Show source-provided references
1. I. Kim and S.B. Lee, IEEE Trans. Compon. Packag. Technol. 31, 478 (2008).10.1109/TCAPT.2008.921650 ↗
2. J.H.L. Pang and F.X. Che, J. Electron. Packag. 129, 496 (2007).10.1115/1.2809442 ↗
3. S. Shetty, V. Lehtinen, and A. Dasgupta, J. Electron. Packag. 123, 302 (2001).10.1115/1.1362673 ↗
4. A. Skipor and L. Leicht, in Proceedings of the Electronic Components and Technology Conference, 2001.
5. Y.S. Lai, T.H. Wang, H.H. Tsai, and M.H.R. Jen, Microelectron. Reliab. 47, 111 (2007).10.1016/j.microrel.2006.04.010 ↗
6. S. Shetty and T. Reinikainen, J. Electron. Packag. 125, 556 (2003).10.1115/1.1604158 ↗
7. L.L. Mercado, B. Phillips, S. Sahasrabudhe, J.P. Sedillo, D. Bray, E. Monroe, K.J. Lee, and G. Lo, in Proceedings of the Electronic Components and Technology Conference, 2004.
8. C.L. Coq, A. Tougui, M.P. Stempin, and L. Barreau, Microelectron. Reliab. 50, 1007 (2010).10.1016/j.microrel.2010.03.015 ↗
9. IPC Standard, IPC-9701, in Performance Test Methods and Qualification Requirements for Surface Mount Solder Attachments, 2002.
10. Y. Zhou, and A. Dasgupta, in Proceedings of the ASME International Mechanical Engineering Congress and Exposition, 1, 2007.
11. Y. Zhou, M. Al-Bassyiouni, and A. Dasgupta, IEEE Trans. Compon. Packag. Technol. 33, 319 (2010).10.1109/TCAPT.2009.2036834 ↗
12. S. Knecht and L.R. Fox, IEEE Trans. Compon. Hybrids Manuf. Technol. 13, 424 (1990).10.1109/33.56179 ↗
13. R. Mahmudi, A. Rezaee-Bazzaz, and H.R. Banaie-Fard, J. Alloy. Compd. 429, 192 (2007).10.1016/j.jallcom.2006.04.037 ↗
14. H. Ma, J. Mater. Sci. 44, 3841 (2009).10.1007/s10853-009-3521-9 ↗
15. J.K. Shang, Q.L. Zeng, L. Zhang, and Q.S. Zhu, Lead-Free Electronics Solders, 211 (2006).10.1007/s10854-006-9027-1 ↗
16. C. Kanchanomoi, Y. Miyashita, and Y. Mutoh, J. Electron. Mater. 31, 142 (2002).10.1007/s11664-002-0161-0 ↗
17. A. Dasgupta, C. Oyan, D. Barker, and M. Pecht, J. Electron. Packag. 144, 152 (1992).10.1115/1.2906412 ↗
18. L.J. Ladani, Microelectron. Eng. 87, 201 (2010).
19. R. Darveaux and K. Banerji, IEEE Trans. Compon. Hybrids Manuf. Technol. 15, 1013 (1992).10.1109/33.206925 ↗
20. S. Verma, A. Dasgupta, and D. Barker, Trans. ASME 115, 416 (1993).
21. L.J. Ladani and A. Dasgupta, J. Electron. Packag. 129, 273 (2007).10.1115/1.2753911 ↗
22. A.J. Rafanelli, J. Electron. Packag. 114, 234 (1992).10.1115/1.2906423 ↗
23. P. Lall, S. Shantaram, J. Suhling, and D. Locker, in Proceedings of the Electronic Components and Technology Conference, 2012.
24. M. Osterman and A. Dasgupta, Lead-Free Electronics Solders, 229 (2007).
25. G. Cuddalorepatta, M. Williams, and A. Dasgupta, J. Electron. Mater. 39, 2292 (2010).10.1007/s11664-010-1296-z ↗