Two-Dimensional Thermal Resistance Analysis of a Waste Heat Recovery System with Thermoelectric Generators
Source abstract
Abstract
In this study, it is shown that two-dimensional (2D) thermal resistance analysis is a rapid and simple method to predict the power generated from a waste heat recovery system with thermoelectric generators (TEGs). Performance prediction is an important part of system design, generally being simulated by numerical methods with high accuracy but long computational duration. Use of the presented analysis saves much time relative to such numerical methods. The simple 2D model of the waste heat recovery system comprises three parts: a recovery chamber, the TEGs, and a cooling system. A fin-structured duct serves as a heat recovery chamber, to which were attached the hot sides of two TEGs; the cold sides were attached to a cooling system. The TEG module and duct had the same width. In the 2D analysis, unknown temperatures are located at the centroid of each cell into which the system is divided. The relations among the unknown temperatures of the cells are based on the principle of energy conservation and the definition of thermal resistance. The temperatures of the waste hot gas at the inlet and of the ambient fluid are known. With these boundary conditions, the unknown temperatures in the system become solvable, and the power generated by the TEGs can be predicted. Meanwhile, a three-dimensional (3D) model of the system was simulated in FloTHERM 9.2. The 3D numerical solution matched the solution of the 2D analysis within 10%.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced Thermoelectric Materials and Devices · Heat Transfer and Optimization · Thermal properties of materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (12)
Show source-provided references
1. T. Kajikawa and T. Onishi, Proceedings of the 26th International Conference on Thermoelectrics, IEEE (2007), p. 322.
2. N.D. Love, J.P. Szybist, and C.S. Sluder, Appl. Energy 89, 322 (2012).10.1016/j.apenergy.2011.07.042 ↗
3. M. Kishi, H. Nemoto, T. Hamao, M. Yamamoto, S. Sudou, M. Mandai, and S. Yamamoto, Proceedings of the 18th International Conference on Thermoelectrics, IEEE (1999), p. 301.
4. T. Ota, K. Fujita, S. Tokura, and K. Uematsu, Proceedings of the 25th International Conference on Thermoelectrics, IEEE (2006), p. 354.
5. C. Eisenhut and A. Bitschi, Proceedings of the 25th International Conference on Thermoelectrics, IEEE (2006), p. 510.
6. Y.Y. Hsiao, W.C. Chang, and S.L. Chen, Energy 35, 1447 (2010).10.1016/j.energy.2009.11.030 ↗
7. X. Gou, H. Xiao, and S. Yang, Appl. Energy 87, 3131 (2010).10.1016/j.apenergy.2010.02.013 ↗
8. N. Espinosa, M. Lazard, L. Aixala, and H. Scherrer, J. Electron. Mater. 39, 1446 (2010).10.1007/s11664-010-1305-2 ↗
9. F. Meng, L. Chen, and F. Sun, Energy 36, 3513 (2011).10.1016/j.energy.2011.03.057 ↗
10. A. Bejan, Convection Heat Transfer, 3rd ed. (New York: Wiley, 2004), pp. 351–357.
11. İ. Kurtbaş, Exp. Therm. Fluid Sci. 33, 140 (2008).10.1016/j.expthermflusci.2008.07.012 ↗
12. R.W. Knight, D.J. Hall, J.S. Goodling, and R.C. Jaeger, IEEE Trans. Compon. Hybrids Manuf. Technol. 15, 832 (1992).10.1109/33.180049 ↗