Performance Study of Thermoelectric Solar-Assisted Heat Pump with Reflectors
Source abstract
Abstract
The simultaneous conversion of solar radiation into thermal and electrical energy in a thermoelectric (TE) solar-assisted heat pump is, for the purposes of this study, referred to as hybrid conversion. To capture more thermal and electrical energy, flat-plate reflectors have been mounted on a TE solar collector. To obtain higher solar radiation intensity on the TE solar collector, the position of the reflectors has been changed and the optimal position of the reflectors determined by both experimental measurements and numerical calculation so as to obtain maximal concentration of solar radiation intensity. The calculated values have been found to be in good agreement with measured ones. Improvements to the thermal energy and electrical power outputs of the system can be achieved by the use of the TE solar-assisted heat pump with reflectors. For the optimum position of the reflectors, the coefficient of performance (COP) of the system formed from a TE solar collector integrated with a heat pump (TESC-HP) was 5.60. The power output and conversion efficiency of the TE modules can reach 10.09 W and 2.40%, respectively, being improved by 34.5% and 18.2%, respectively, compared with the TESC-HP without reflectors.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced Thermoelectric Materials and Devices · Solar Thermal and Photovoltaic Systems · Thermal Radiation and Cooling Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (14)
Show source-provided references
1. H. Scherrer, L. Vikhor, B. Lenior, A. Dauscher, and P. Poinas, J. Power Sour. 115, 141 (2003).10.1016/S0378-7753(02)00597-9 ↗
2. D. Kraemer, B. Poudel, H.P. Feng, J.C. Caylor, B. Yu, X. Yan, Y. Ma, X. Wang, D. Wang, A. Muto, K. McEnaney, M. Chiesa, Z. Ren, and G. Chen, Nat. Mater. 10, 532 (2011).10.1038/nmat3013 ↗
3. H. Fan, R. Singh, and A. Akbarzadeh, J. Electron. Mater. 40, 1311 (2011).10.1007/s11664-011-1625-x ↗
4. C. Lertsatitthanakorn, M. Rungsiyopas, A. Theryothin, and S. Soponronnarit, J. Electron. Mater. 41, 999 (2012).10.1007/s11664-011-1838-z ↗
5. G. Casano and S. Piva, Exp. Therm. Fluid Sci. 35, 660 (2011).10.1016/j.expthermflusci.2010.12.016 ↗
6. C. Lertsatitthanakorn, J. Jamradloedluk, M. Rungsiyopas, A. Theryothin, and S. Soponronnarit, J. Electron. Mater. 42, 2320 (2013).10.1007/s11664-012-2414-x ↗
7. S. Pattanasethanon, C. Lertsatitthanakorn, S. Atthajariyakun, and S. Soponronnarit, Energy Convers. Manag. 49, 1999 (2008).10.1016/j.enconman.2008.02.014 ↗
8. Lj.T. Kostic, T.M. Pavlovic, and Z.T. Pavlovic, Appl. Energy 87, 3023 (2010).10.1016/j.apenergy.2010.02.015 ↗
9. S.A. Kalogirou, Solar Energy Engineering: Processes and Systems (Oxford: Elsevier, 2009).
10. T.T. Chow, G. Pei, K.F. Fong, Z. Lin, A.L.S. Chan, and M. He, Appl. Energy 87, 643 (2010).10.1016/j.apenergy.2009.05.036 ↗
11. Y. Vorobiev, J. Gonzalez-Hernandez, P. Vorobiev, and L. Bulat, Sol. Energy 80, 170 (2006).10.1016/j.solener.2005.04.022 ↗
12. B.R. Peterson, Trans. ASME J. Eng. Gas Turbine Power 129, 1106 (2007).10.1115/1.2747261 ↗
13. W.E. Miller, J.T. Hendricks, and B.R. Peterson, J. Electron. Mater. 38, 1206 (2009).10.1007/s11664-009-0743-1 ↗
14. J. Xiao, T. Yang, P. Li, P. Zhai, and Q. Zhang, Appl. Energy 93, 33 (2012).10.1016/j.apenergy.2011.06.006 ↗