Evolution of Structural, Optical and Electrical Characteristics of Spin-Coated CdO Thin Films with the Gelation State of the Sol–Gel
Source abstract
Abstract
The present work is intended to investigate the influence of the gelation state of the sol–gel on the properties of spin-coated cadmium oxide (CdO) thin films. The viscosity of the sol–gel increases at a slow uniform rate up to 5 days (break-off point) after which the rise becomes progressively more rapid and it attains saturation after 10 days of gelation. Films have been grown with gelation times of 2 days, 4 days, 6 days, 8 days, 9 days and 10 days. The visual characteristics of the films have been discussed in terms of the centrifugal force acting on the sol–gel. The sol–gel viscosity seems to be better suited to represent the gelation state of the sol–gel rather than the gelation time. The x-ray diffraction studies show that lower gelation times and lower sol–gel viscosities give rise to single crystalline CdO thin films while gelation times of 6 days and above (i.e. sol–gel viscosities of 2.92 × 10−3 N s m−2 and more) yield polycrystalline CdO thin films. The gelation state of the sol–gel has been found to have a strong bearing on the properties of CdO thin films, and highly conducting and transparent CdO thin films can be achieved by controlling the gelation state of the sol–gel and the results obtained have been reported.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: ZnO doping and properties · Gas Sensing Nanomaterials and Sensors · Copper-based nanomaterials and applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (31)
Show source-provided references
1. T.P. Gujar, V.R. Shinde, W.-Y. Kim, K.-D. Jung, C.D. Lokhande, and O.-S. Joo, Appl. Surf. Sci. 254, 3813 (2008).10.1016/j.apsusc.2007.12.015 ↗
2. C. Aydin, H.M. El-Nasser, F. Yakuphanoglu, I.S. Yahia, and M. Aksoy, J. Alloys Compd. 509, 854 (2011).10.1016/j.jallcom.2010.09.111 ↗
3. P. Perumal, A. Gowri Manohari, S. Valanarasu, A. Kathalingam, J.-K. Rhee, N. Soundaram, and R. Chandramohan, J. Surf. Eng. Mater. Adv. Technol. 2, 71 (2012).
4. M.H. Suhail, I.M. Ibrahim, and G. Mohan Rao, J. Electron. Dev. 13, 965 (2012).
5. Q. Zhou, Z. Ji, B. Hu, C. Chen, L. Zhao, and C. Wang, Mater. Lett. 61, 531 (2007).10.1016/j.matlet.2006.05.004 ↗
6. B. Saha, R. Thapa, and K.K. Chattopadhyay, Sol. Energy Mater. Sol. Cells 92, 1077 (2008).10.1016/j.solmat.2008.03.024 ↗
7. M. Yan, M. Lane, C.R. Kannewurf, and R.P.H. Chang, Appl. Phys. Lett. 78, 2342 (2009).10.1063/1.1365410 ↗
8. R.R. Salunkhe and C.D. Lokhande, Sens. Actuators B129, 345 (2008).10.1016/j.snb.2007.08.035 ↗
9. B. Ergin, E. Ketenci, and F. Atay, Int. J. Hydrogen Energy 34, 5249 (2009).10.1016/j.ijhydene.2008.09.108 ↗
10. B.G. Jeyaprakash, K. Kesavan, R. Ashok Kumar, S. Mohan, and A. Amalarani, J Am. Sci. 6, 75 (2010).
11. H.K.J. Al-Ogili, Eng. Technol. J. 29, 1536 (2011).
12. D. Lamb and S.J.C. Irvine, Thin Solid Films 518, 1222 (2009).10.1016/j.tsf.2009.05.067 ↗
13. A.M. Ayala, G.T. Delgado, R.C. Perez, and O.Z. Angel, J. Alloys Compd. 506, 554 (2010).10.1016/j.jallcom.2010.07.054 ↗
14. S. Ilican, M. Caglar, Y. Caglar, and F. Yakuphanoglu, Optoelectron. Adv. Mater. Rapid Commun. 3, 135 (2009).
15. M. Mahaboob Beevi, M. Anusuya, and V. Saravanan, Int. J. Chem. Eng. Appl. 1, 151 (2010).
16. R.R. Salunkhe, D.S. Dhawale, D.P. Dubal, and C.D. Lokhande, Sens. Actustors B 140, 86 (2009).10.1016/j.snb.2009.04.046 ↗
17. E. Savarimuthu, K.C. Lalithambika, A. Moses Ezhil Raj, L.C. Nehru, S. Ramamurthy, A. Thayumanavan, C. Sanjeeviraja, and M. Jayachandran, J. Phys. Chem. Solids 68, 1380 (2007).10.1016/j.jpcs.2007.02.038 ↗
18. B.G. Jeyaprakash, K. Kesavan, R. Ashok Kumar, S. Mohan, and A. Amalarani, Bull. Mater. Sci. 34, 601 (2011).10.1007/s12034-011-0169-2 ↗
19. R.L. Mishra, A.K. Sharma, and S.G. Prakash, Digest. J. Nanomater. Biostruct. 4, 511 (2009).
20. S. Kose, F. Atay, V. Bilgin, and I. Akyuz, Int. J. Hydrogen Energy 34, 5260 (2009).10.1016/j.ijhydene.2008.11.110 ↗
21. A.M. Ayala, G.T. Delgado, R.C. Perez, and O.Z. Angel, J. Alloy Compd. 506, 554 (2010).10.1016/j.jallcom.2010.07.054 ↗
22. P.P. Sahay, R.K. Nath, and S. Tewari, Cryst. Res. Technol. 42, 275 (2007).10.1002/crat.200610812 ↗
23. C. Dantus, R.S. Rusu, and G.I. Rusu, Superlattices Microstruct. 50, 303 (2011).10.1016/j.spmi.2011.07.008 ↗
24. M.M. Islam, M.R. Islam, and J. Podder, J. Bangladesh Acad. Sci 31, 97 (2008).
25. A.R. Balu, V.S. Nagorethinam, M. Suganya, N. Arunkumar, and G. Selvam, J. Electron. Dev. 12, 739 (2012).
26. A.A. Dakhel, Semicond. Sci. Technol. 23, 1 (2008).10.1088/0268-1242/23/5/055017 ↗
27. R. Kumaravel, S. Menaka, S.R.M. Snega, K. Ramamurthi, and K. Jeganathan, Mater. Chem. Phys. 122, 444 (2010).10.1016/j.matchemphys.2010.03.022 ↗
28. M.K.R. Khan, M.A. Rahman, M. Shahjahan, M.M. Rahman, M.A. Hakim, D.K. Saha, and J.U. Khan, Curr. Appl. Phys. 10, 790 (2010).10.1016/j.cap.2009.09.016 ↗
29. B.J. Zheng, J.S. Lian, L. Zhao, and Q. Jiang, Appl. Surf. Sci. 256, 2910 (2010).10.1016/j.apsusc.2009.11.049 ↗
30. K.R. Murali, A. Kalaivanan, S. Perumal, and N. Neelakanda Pillai, J. Alloys Compd. 503, 350 (2010).10.1016/j.jallcom.2009.11.187 ↗
31. K. Sivaramamoorthy, A. Kalaivanan, S. Perumal, and K.R. Murali, International Conference on Nanoscience, Engineering and Technology (ICONSET), 28–30 June 2011, (IEEE, 2011), pp. 91–93.10.1109/ICONSET.2011.6167918 ↗