journal article·2015-12

Alkali Silicate Glass Coatings for Mitigating the Risks of Tin Whiskers

Dave Hillman, Ross Wilcoxon, Nate Lower, Dan Grossman

Journal of Electronic Materials· Volume 44· Issue 12
Publisher page

Abstract

Alkali silicate glass (ASG) coatings were investigated as a possible method for inhibiting tin whisker initiation and growth. The aqueous-based ASG formulations used in this study were deposited with equipment and conditions that are typical of those used to apply conventional conformal coatings. Processes for controlling ASG coating properties were developed, and a number of ASG-based coating combinations were applied to test components with pure tin surfaces. Coatings were applied both in a laboratory environment at Rockwell Collins and in a manufacturing environment at Plasma Ruggedized Solutions. Testing in elevated humidity/temperature environments and subsequent inspection of the test articles identified coating combinations that inhibited tin whisker growth as well as other material combinations that actually accelerated tin whisker growth. None of the coatings evaluated in this study, including conventional acrylic and Parylene conformal coatings, completely prevented the formation of tin whiskers. Two of the coatings were particularly effective at reducing the risks of whisker growth, albeit through different mechanisms. Parylene conformal coating almost, but not completely, eliminated whisker formation, and only a few tin whiskers were found on these surfaces during the study. A composite of ASG and alumina nanoparticles inhibited whisker formation to a lesser degree than Parylene, but did disrupt whisker growth mechanisms so as to inhibit the formation of long, and more dangerous, tin whiskers. Additional testing also demonstrated that the conformal coatings had relatively little effect on the dielectric loss of a stripline test structure operating at frequencies over 30 GHz.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Electronic Packaging and Soldering Technologies · Advanced ceramic materials synthesis · Electrical Contact Performance and Analysis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (21)

Show source-provided references
1. http://www.serdp.org/Program-Areas/Weapons-Systems-and- Platforms/Lead-Free-Electronics . Accessed 12 February 2015
2. NASA Technical Support to the National Highway Traffic Safety Administration (NHTSA) on the Reported Toyota Motor Corporation (TMC) Unintended Acceleration (UA) Investigation, http://www.nhtsa.gov/staticfiles/nvs/pdf/NASA- UA_report.pdf . Accessed 11 December 2014
3. N. Lower and R. Wilcoxon, 26th 22nd Semiconductor Thermal Measurement and Management Symposium, p. 93–99, 201010.1109/STHERM.2010.5444309 ↗
4. M. Osterman, IPC Tin Whisker Conference Proceedings, Fort Worth TX, March 17–19, 2012
5. J.E. Shelby, Introduction to Glass Science and Technology, 2nd ed. (London: Royal Society of Chemistry, 2005).10.1039/9781847551160 ↗
6. R.J. Charles, J. Am. Ceram. Soc. 48, 432 (1965).10.1111/j.1151-2916.1965.tb14784.x ↗
7. B.A. Proctor, et al., Proc. R. Soc. Lond. Ser. A 297, 534 (1967).10.1098/rspa.1967.0085 ↗
8. J.M.F. Ferreira and H.M.M. Diz, J. Am. Ceram. Soc. 82, 1993 (1999).10.1111/j.1151-2916.1999.tb02031.x ↗
9. D. Hillman, et al., Surface Mount Technology Association International (SMTAI) Conference, Schaumburg, IL, September 30–October 2, 2014
10. J. Osenbach, J. Appl. Phys. 106, 094903 (2009).10.1063/1.3248277 ↗
11. JEDEC Standard, JESD201, Environmental Acceptance Requirements for Tin Whisker Susceptibility of Tin and Tin Alloy Surface Finishes, March 2006
12. J. Osenbach et al., IEEE Transactions on Electronics Packaging Manufacturing, vol. 33, no. 1, January, 201010.1109/TEPM.2009.2032919 ↗
13. P. Snugovsky et al., IPC Tin Whisker Conference Proceedings, Fort Worth TX, March 17–19, 2012
14. T. Woodrow, Surface Mount Technology Association International (SMTAI) Conference, Schaumburg, IL, September 272, 2006
15. P. Sarobol, et al., JOM 65, 1350 (2013).10.1007/s11837-013-0717-x ↗
16. P. Snugovsky, et al., IPC-SMTA Cleaning & Conformal Coating Conference, Schaumburg, IL, November 16–18, 2010
17. T. Woodrow and E. Ledbury, Surface Mount Technology Association International (SMTAI) Conference, Schaumburg, IL, September 2006
18. DfR Solutions, Maximum Whisker Length: A New Paradigm, Lead-free Electronics in Aerospace Project (LEAP) meeting (FL: Melbourne, 2008).
19. L. Woody and W. Fox, IPC APEX EXPO Conference Proceedings, Las Vegas, NV, March, 25–27, 2014
20. L. Panashchenko, IPC Tin Whisker Conference Proceedings, Schaumburg, IL, December 6–7, 2010
21. T. Woodrow, CALCE Symposium on Reprocessing Tin Whisker Mitigation and Assembly Rework Proceedings, College Park, MD, November 11–12, 2008