Effect of Cyclic Uniaxial Pressure in Pulse-Current Sintering on Microstructure of Bi2Te3-Based Thermoelectric Materials
Source abstract
Abstract
Various cyclic uniaxial pressure patterns have been applied to a powder of Bi0.4Sb1.6Te3 thermoelectric material during the pulse-current sintering process. The cyclic uniaxial pressure pattern (0 MPa to 100 MPa) was varied by changing the number of pressure cycles and the ratio of the pressing time to the time during which no pressure was applied (i.e., pressing time/pressureless time). Sintering was performed at 400°C for 10 min in vacuum. Electron backscattered diffraction analysis revealed that both the number of pressure cycles and the pressing time ratio strongly affected the microstructure of the sintered materials. Increasing the number of pressure cycles led to a monotonic increase in the intensity of the c-plane orientation. Increasing the pressing time ratio also enhanced the intensity of the c-plane orientation, although the intensity of the c-plane orientation decreased at larger pressing time ratios. These results indicate that constant pressure and pressureless sintering are not effective for attaining c-plane orientation and that the cyclic uniaxial pressure pattern is important for controlling the microstructure of the sintered material. Consequently, the thermoelectric properties of sintered materials could be enhanced by varying the cyclic uniaxial pressure pattern.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced Thermoelectric Materials and Devices · Thermal properties of materials · Topological Materials and Phenomena
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (24)
Show source-provided references
1. Z.A. Munir, U. Anselmi-Tamburini, and M. Ohyanagi, J. Mater. Sci. 41, 763 (2006).10.1007/s10853-006-6555-2 ↗
2. Z.A. Munir, D.V. Quach, and M. Ohyanagi, J. Am. Ceram. Soc. 94, 1 (2011).10.1111/j.1551-2916.2010.04210.x ↗
3. R. Orrù, R. Licheri, A.M. Locci, A. Cincotti, and G. Cao, Mater. Sci. Eng. R 63, 127 (2009).10.1016/j.mser.2008.09.003 ↗
4. O. Guillon, J. Gonzalez-Julian, B. Dargatz, T. Kessel, G. Schierning, J. Räthel, and M. Herrmann, Adv. Eng. Mater. 16, 830 (2014).10.1002/adem.201300409 ↗
5. R. Murugasami, P. Vivekanandhan, S. Kumaran, R. Suresh Kumar, and T. John Tharakan, J. Alloys Compd. 773, 752 (2019).10.1016/j.jallcom.2018.09.029 ↗
6. M. Aminzare, Y. Tseng, and Y. Mozharivskyj, J. Solid State Chem. 269, 434 (2019).10.1016/j.jssc.2018.10.020 ↗
7. B. Srinivasan, C. Boussard-Pledel, and B. Bureau, Mater. Lett. 230, 191 (2018).10.1016/j.matlet.2018.07.132 ↗
8. N. Liu, W.A. Jensen, M. Zebarjadi, and J.A. Floro, Mater. Today Phys. 4, 19 (2018).10.1016/j.mtphys.2018.02.004 ↗
9. A. Novitskii, G. Guélou, D. Moskovskikh, A. Voronin, E. Zakharova, L. Shvanskaya, A. Bogach, A. Vasiliev, V. Khovaylo, and T. Mori, J. Alloys Compd. 785, 96 (2019).10.1016/j.jallcom.2019.01.183 ↗
10. H. Kitagawa, K. Nagao, N. Mimura, S. Morito, and K. Kikuchi, J. Electron. Mater. 43, 1574 (2014).10.1007/s11664-013-2796-4 ↗
11. H. Kitagawa, K. Takimura, S. Ido, S. Morito, K. Kikuchi, J. Alloys Compd. 692, 388 (2017).10.1007/s11664-015-4094-9 ↗
12. A. Suzuki, H. Kitagawa, S. Ido, A.H. Pham, T. Etoh, and K. Kikuchi, J. Alloys Compd. 742, 240 (2018).10.1016/j.jallcom.2018.01.269 ↗
13. W.M. Yim and F.D. Rosi, Solid State Electron. 15, 1121 (1972).10.1016/0038-1101(72)90172-4 ↗
14. H. Scherrer and S. Scherrer, CRC Handbook of Thermoelectrics, ed. D.M. Rowe (Boca Raton: CRC, 1995),
15. T. Caillat, M. Carle, P. Pierrat, H. Scherrer, and S. Scherrer, J. Phys. Chem. Solids 53, 1121 (1992).10.1016/0022-3697(92)90087-T ↗
16. T. Caillat, L. Gailliard, H. Scherrer, and S. Scherrer, J. Phys. Chem. Solids 54, 575 (1993).10.1016/0022-3697(93)90235-J ↗
17. A. Vasil’ev, M. Yaprintsev, O. Ivanov, and E. Danshina, Solid State Sci. 84, 28 (2018).10.1016/j.solidstatesciences.2018.08.004 ↗
18. B. Min, S. Lim, S. Jung, G. Kim, B. Lee, S. Won, S. Kim, J. Rhyee, J. Kim, and S. Baek, J. Alloys Compd. 764, 261 (2018).10.1016/j.jallcom.2018.06.026 ↗
19. H. Cho, J. Kim, S. Back, K. Ahn, J. Rhyee, and S. Park, J. Alloys Compd. 731, 531 (2018).10.1016/j.jallcom.2017.10.016 ↗
20. Z. Wang, T. Akao, T. Onda, and Z. Chen, J. Alloys Compd. 663, 134 (2016).10.1016/j.jallcom.2015.12.122 ↗
21. Y. Zhang, X. Jia, L. Deng, X. Guo, H. Sun, B. Liu, and H. Ma, J. Alloys Compd. 632, 514 (2015).10.1016/j.jallcom.2015.01.271 ↗
22. Q. Lognoné, F. Gascoin, O.I. Lebedev, L. Lutterotti, S. Gascoin, and D. Chateigner, J. Am. Ceram. Soc. 97, 2038 (2014).10.1111/jace.12970 ↗
23. A.J. Schwartz, M. Kumar, and B.L. Adams, eds., Electron Backscatter Diffraction in Materials Science (New York: Kluwer Academic/Plenum, 2000).
24. J.R. Wiese and L. Muldawer, J. Phys. Chem. Solids 15, 13 (1960).10.1016/0022-3697(60)90094-9 ↗